Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Google Ads & PPC › Display Campaigns

Excluding Existing Customers from Prospecting

How to keep Google Ads prospecting on new customers: defining an existing customer, building exclusion lists, settings by campaign type and measuring it.
Guideintermediate10 min readUpdated

Why prospecting drifts towards existing customers

Every automated system in Google Ads is rewarded for conversions, and the cheapest conversions come from people who were already likely to convert. The display targeting guide describes optimised targeting as looking for people likely to convert using signals such as the characteristics of people who already converted, which points it towards the customer base. The Shopping and Performance Max hub is blunter: Performance Max will happily serve existing customers who would have bought anyway, and the new customer acquisition goal and audience exclusions exist for that reason. The display hub describes display prospecting as introducing the brand to people who do not know it, which a campaign serving its own customers is not doing.

The cost is hidden by the reporting. The prospecting versus remarketing playbook explains that conversions from warm audiences show a low cost and a high return as the platforms report them, while much of what they report would have happened without the ad. A prospecting campaign that has drifted onto customers therefore looks like a success: its cost per conversion falls, its return rises, and the number of new customers the business acquires does not move. The same pattern appears on Meta, where the diagnosis of Advantage+ audience reaching existing customers traces it to missing exclusions, buyer-based suggestions and stale lists.

Defining an existing customer

Before any list is built, decide who counts. The definition comes from the business's own records, not from the ad platform, and it should reflect when a customer stops being someone the business can expect to hear from again. The RFM segmentation framework gives the vocabulary: recency, frequency and monetary value. A customer who bought recently, buys often or spends a lot is plainly existing; a customer whose last order was long ago, by the standard of the business's own repurchase cycle, may be closer to a new prospect and may be worth reactivating rather than excluding.

SegmentDefinition from the business's recordsIn prospectingElsewhere
Active customersBought within the business's normal repurchase cycle, or an active subscriberExcluded, or bid down where the campaign type allowsRetention: email, loyalty, remarketing with a customer message
Lapsed customersLast order well beyond the normal cycleUsually left in, or targeted by a reactivation campaignWin-back offers and reactivation remarketing
Recent convertersConverted in the last few days or weeksExcludedExcluded from acquisition remarketing too
Prospects who never boughtVisitors, subscribers or leads without an orderLeft in; they are the prospecting audienceRemarketing and nurture

Write the definition down with the boundaries the business chose, because every later list, setting and report depends on it. For a subscription business, "existing" usually means an active subscription; for a retailer, an order within a period the order history supports. When the same definition has to serve Meta and other platforms as well, using customer lists across ad platforms sets out one register of segments for all of them.

Building the exclusion lists

The targeting guide describes the sources Google Ads uses for "your data" lists: the Google tag or Google Analytics for site visitors, specific page viewers and converters; app events; YouTube interactions; and customer match, where the advertiser uploads hashed contact data and Google matches it to signed-in users. Each source catches some customers and misses others, so an exclusion usually combines more than one.

ListBuilt fromCatchesMisses
Customer match listHashed contact details of customers, uploaded from the CRM or order systemCustomers who can be matched to a signed-in Google accountCustomers who cannot be matched, and anyone added since the last upload
Converters listThe purchase or sign-up conversion recorded by the Google tagRecent buyers on the devices and browsers they usedCustomers who bought offline, on another device, or before the tag existed
Site visitors in customer areasVisits to account, order-tracking or subscription pagesCustomers who log in or track ordersCustomers who never visit those pages

Three constraints shape the result. The targeting guide notes that lists need enough members before Google will serve against them, so a small business may find its customer list too small to use. The remarketing entry explains that tag-based lists depend on visitors having consented to advertising cookies, so the converters list holds only consenting buyers. And customer match finds only the people it can match: the match rate entry points out that every unmatched row is a customer who cannot be excluded, and that the identifiers in the file decide most of the rate, so include every identifier the business holds with the consent its privacy notice describes. This is First-Party Data, and the lawful basis for using it in advertising is the business's responsibility before it is a setting.

Settings by campaign type

The setting that applies differs by campaign type, and the campaign's job decides whether to use it.

Display. Audience exclusions are part of the targeting guide's list of exclusions: existing customers from prospecting campaigns, recent converters from acquisition Remarketing. The same guide states that Google respects exclusions even when optimised targeting is expanding delivery, so the exclusion holds however widely the campaign looks for new people. Apply the customer list and the converters list to every prospecting campaign; the display launch tutorial sets them as part of the exclusions step.

Video. The YouTube audience targeting guide states that site and app remarketing lists and customer match lists work on video as they do on display, including existing customers to exclude from prospecting.

Search. In Search the keyword is the targeting, and audiences modify it: segments can be applied for observation, which reports without restricting, or for targeting. A customer list in observation on non-brand campaigns shows how much spend and how many conversions come from customers before anything is restricted. Excluding customers from Search is a narrower decision than on display, because a customer searching for a product the business sells may be about to buy again; it suits campaigns whose job is strictly acquisition, when repeat orders are won another way. Brand campaigns usually keep customers in. The guide to audience segments in Search campaigns covers observation, targeting and exclusions in Search, and how to read the audience report before restricting anything.

Performance Max. The next section covers its own control, which is not an audience exclusion.

Performance Max and the customer acquisition goal

The Performance Max structure guide describes the customer acquisition goal: the campaign can be set to bid higher for new customers, or to bid only for new customers, based on customer lists and detected purchasers. It calls this the only documented way to shape whether a Performance Max campaign spends on existing customers, and notes that it depends on a customer list being maintained.

The choice between the two follows from the business. "Bid only for new customers" suits a campaign whose sole job is acquisition, with existing customers reached through retention channels. "Bid higher for new customers" suits a business that values repeat orders from the campaign but wants new customers to count for more. In both cases, the quality of the customer list decides how well the setting works, for the same matching reasons as above.

Two related points prevent confusion. Audience signals are suggestions the campaign is expected to serve beyond, so a customer list added as a signal does not exclude customers; it describes the kind of person to look for. And brand exclusions keep people who search for the business by name, many of them existing customers, out of the campaign's search traffic; the structure guide recommends them for honest reporting, and they help here too.

Keeping lists fresh

An exclusion list is only as current as its last update. A customer match list uploaded once excludes the customers of that month and nobody since; the remarketing entry describes customer lists as refreshed by upload. Schedule the upload from the CRM or order system, as often as new customers arrive in meaningful numbers, and check after each upload that the list's size has moved in line with the customer base. Set the membership duration of tag-based lists to match the definition chosen above, so that a lapsed customer leaves the converters list at roughly the point the business stops treating them as active. The targeting guide's advice to match membership duration to the purchase cycle applies to exclusions as much as to remarketing.

Measuring the share of new customers

The campaign's own report cannot say whether exclusions are working, because it counts only the conversions it can see and labels them by its own lists. Measure the share of new customers in the business's own records: flag each order or contract as from a new or existing customer by the definition above, and read the share for the orders that paid search, display and Performance Max are credited with. The guide to new and returning customers in marketing data sets out how to record that status at the moment of conversion and report it by channel without double counting.

Read three figures before and after a change: the new-customer share of credited orders, the number of new customers acquired, and the cost per new customer. The CPA calculator turns spend and new customers into the last of those. A successful exclusion usually raises the reported cost per conversion, because the easy conversions are gone, while the cost per new customer holds or falls. The Performance Max uplift test uses the same new-customer share as one of its guardrails, read from the business's own customer records by region. Where the open question is whether excluded customers' repeat orders were won by the prospecting ads, the existing customer exclusion test is a regional design that reads cost per new customer beside those customers' orders across every channel.

When not to exclude

Exclusion is a tool for acquisition campaigns, not a rule for the whole account. Leave existing customers in where:

  • The campaign's job includes them. Brand search, reactivation campaigns aimed at lapsed customers, and remarketing to customers with a cross-sell or replenishment message all exist to reach people who have bought.
  • The business depends on repeat purchase and has no other way to win it. A store whose margin comes from the second and third order, as the repeat purchase and loyalty guide describes, should not exclude customers everywhere unless email, loyalty or dedicated retention campaigns carry those orders. Where they do, excluding customers from prospecting is right; where they do not, the decision is which campaign buys repeat orders, not whether to.
  • The list cannot do the job. A list too small to serve, or matched so poorly that it covers few customers, adds complexity without effect; improve the data before relying on the exclusion.

A tea subscription keeps prospecting new (illustrative)

Illustrative example — not a real result

Moonsorrel Tea measures how many of its prospecting customers are new

Moonsorrel Tea, an invented loose-leaf tea subscription, runs a Performance Max campaign, a display prospecting campaign and Search. Its subscription system shows that of the 540 orders credited to Performance Max and display prospecting in a quarter, 46% came from active subscribers buying extras or gifting, so the two campaigns' cost per conversion of £21 is really £39 per new customer.

The business defines an existing customer as an active subscriber or anyone who ordered in the last 120 days, and builds the lists and settings below.

CampaignList or setting appliedBeforeAfter
Performance MaxCustomer acquisition goal set to bid only for new customers; customer match list uploaded weekly; brand exclusionNo acquisition goal; list uploaded once a year earlierAs listed
Display prospectingCustomer match list and 120-day converters list excluded; optimised targeting kept onNo audience exclusionsAs listed
Search, non-brandCustomer list added in observationNoneObservation only; customers 18% of conversions, so no exclusion
Search, brandNo changeCustomers includedCustomers included
QuarterOrders credited to prospectingNew-customer shareNew customersSpendCost per new customer
Before54054%292£11,300£39
After41083%340£11,100£33

Reported conversions fell by a quarter and the campaigns' cost per conversion rose from £21 to £27, but the business acquired 48 more new customers for slightly less spend. Subscribers' extra orders moved to email, where they carry no media cost.

Common mistakes

  • Excluding without a definition. A list of everyone who ever bought excludes lapsed customers worth winning back.
  • Treating audience signals as exclusions. A customer list as a Performance Max signal points the campaign at customers rather than away from them.
  • A customer list uploaded once. It excludes last year's customers and nobody since.
  • Relying on one list. Customer match misses unmatched customers; converters lists miss those who did not consent or bought elsewhere.
  • Judging the change on reported cost per conversion. It rises when exclusions work; the cost per new customer is the measure.
  • Excluding customers everywhere. Brand search and retention campaigns exist to reach them.
  • Measuring new customers in the ad platform alone. The share has to come from the business's own records.

Frequently asked questions

Can I stop Performance Max showing ads to existing customers?

The documented control is the customer acquisition goal, which the Performance Max structure guide describes: the campaign can bid higher for new customers, or bid only for new customers, based on customer lists and detected purchasers. It depends on a customer list being maintained. Audience signals are not exclusions; they are suggestions the campaign is expected to serve beyond, so adding a customer list as a signal does not keep customers out.

Why do my exclusions not remove every existing customer?

Because a list contains only the people who can be recognised. Customer match finds only the uploaded customers it can match to signed-in users, and every unmatched row is a customer who cannot be excluded; tag-based lists depend on consent and on the tag firing; and an upload that is weeks old misses recent buyers. That is why the share of new customers is measured in the business's own order or customer records rather than assumed from the exclusion.

Should existing customers be excluded from Search campaigns?

Rarely from brand campaigns, whose job includes customers looking for the business, and only from non-brand campaigns whose job is strictly acquisition when repeat orders are won another way. Start by adding the customer list in observation, which reports without restricting, to see how much spend and how many conversions it accounts for. Exclude only if that share is material and the business would rather not pay to reach customers through those searches.

Terms used on this page

Tools to try

Frameworks

Where this page is used

Sources

  1. About audience targeting — Google Ads Help
  2. About Performance Max campaigns — Google Ads Help
  3. About targeting for Display campaigns — Google Ads Help

Related