Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Standard Operating Procedures

Email List Hygiene SOP

A standard procedure for email list hygiene: bounce and complaint handling, suppression, inactive segments, re-permission, consent records and reporting.
SOPbeginner6 min readUpdated

Owner, trigger and scope

The email marketer owns the procedure, runs the after-send steps and the monthly pass, and decides on re-permission messages. Marketing operations owns the suppression list, the integrations that sync unsubscribes and suppressions between systems, and the consent records. Both sign off the monthly report.

There are two triggers. After every send, bounces, complaints and unsubscribes are processed so that nobody who has asked to stop is emailed again; the email campaign send SOP passes them here as its last step. Once a month, the full pass runs: inactive segments, re-permission, removal and the consent check.

The scope is marketing email lists in the email platform and any system that feeds them. Transactional email, such as receipts and password resets, follows its own rules and is out of scope, though its bounces should still feed the suppression list. How lists are built and consent is collected is covered in the list building and consent guide; this SOP maintains what that process creates.

Before you start: inputs and access

InputOwnerNotes
Send reportsEmail platformBounces, complaints, unsubscribes by send
Suppression listMarketing operationsGlobal list, synced to every sending system
Inactivity definitionEmail marketerWhat "inactive" means for this list, agreed in advance
Re-permission templateEmail marketerApproved through creative approval
Consent recordsMarketing operationsSource, date and wording of consent per contact
List health report templateEmail marketerSame format every month

You need admin access to the email platform and read access to the CRM or wherever contacts originate. The deliverability guide explains why each step matters; keep it to hand when a number in the report moves unexpectedly.

The procedure

  1. Export bounces and complaints

    After each send, export hard bounces, soft bounces, spam complaints and unsubscribes from the send report. Most platforms suppress hard bounces and complaints automatically, but confirm it has happened and that the change has synced to every other system that can send email. Repeated soft bounces from the same address are treated as hard bounces under the rule your team has agreed.

  2. Update suppression

    Add every unsubscribe, complaint and hard bounce to the global suppression list, with the date and the reason. Check that the list syncs to the CRM and any other sending tools, so an address removed in one place is not emailed from another. Suppression is permanent unless the person actively opts back in; the ICO's direct marketing guidance and the FTC's CAN-SPAM guide both describe honouring opt-outs promptly.

  3. Flag inactive contacts

    Once a month, build a segment of contacts who have not opened or clicked within the agreed inactivity window. Treat opens with caution, since some mail clients report them unreliably, and use clicks, site visits or purchases where available. The segmentation guide explains how to build engagement segments. Move flagged contacts out of regular sends into a holding segment.

  4. Run re-permission

    Send the holding segment a short, approved re-permission message asking whether they still want to hear from you, with a single clear action to stay subscribed. Send it once, with at most one reminder, and do not dress it up as a promotion. Contacts who click to stay return to regular sends; everyone else stays in the holding segment for the next step.

  5. Remove non-responders

    After the response window closes, move non-responders out of all marketing sends. Most teams keep them in a dormant state, suppressed from marketing but retained for records, rather than deleting them. Check the removal does not hit recent customers whose engagement shows elsewhere, such as purchases, since those contacts often have high LTV and may simply read without clicking.

  6. Check consent records

    Sample contacts added since the last pass and confirm each has a recorded consent source, date and wording, or another documented basis the organisation relies on. Check that imports from events, partners or new forms carried consent data across. Contacts without a record are suppressed until it is found. This is general direction drawn from the ICO guidance and the GDPR, not legal advice.

  7. Report list health

    Complete the monthly list health report: list size, new contacts by source, unsubscribes, complaints, bounces, contacts flagged inactive, re-permission responses and removals, compared with last month. Note any send with unusually high complaints or bounces and its likely cause. Track the list's KPI trends over months rather than reacting to one figure.

Illustrative example — not a real result

A dormant segment cleared before a seasonal peak

Willowmere Teas, an invented tea retailer with 48,000 subscribers, runs its monthly pass in October before the Christmas campaign. The inactive segment holds 9,600 contacts with no click or purchase in 12 months. The re-permission email brings 1,150 back; 8,450 are moved to dormant. A consent check finds 300 contacts imported from a trade fair without a consent record, and they are suppressed. Over the following 6 sends, complaints fall by about half, inbox placement improves on the largest mailbox provider, and the campaign's click-to-purchase CVR rises because fewer emails reach people who never buy.

QA checks

Use a seeded test address that has unsubscribed to prove suppression works end to end, rather than trusting the platform's settings page.

Before the monthly report is signed off, the email marketer and marketing operations confirm:

  • Every bounce, complaint and unsubscribe from the month is on the suppression list.
  • Suppression syncs to every sending system and a test address confirms it.
  • Inactive segment uses the agreed definition and excludes recent customers engaging elsewhere.
  • Re-permission message was approved and sent only to the holding segment.
  • Non-responders are suppressed from marketing sends, not deleted.
  • Consent sample checked, with any contact lacking a record suppressed.
  • List health report completed in the standard format and compared with last month.

Hand-offs and records

The list health report goes to whoever owns the email programme and feeds the monthly reporting pack. Any send that caused a spike in complaints is handed back to the lifecycle email programme owner with the evidence, since the cause is usually targeting or frequency rather than hygiene. Consent gaps found in imports go to marketing operations to fix at the source, for example by changing an event form.

The suppression list, the consent records and the monthly reports are the lasting records. Keep the suppression list indefinitely so opted-out contacts can never be re-added by a later import, and keep consent records for as long as the contact is emailed, plus whatever period your data protection lead sets. Both records have to travel when the programme changes platform, and the tutorial on migrating to a new email platform loads the suppression list before any contact is imported.

When the after-send export shows bounces climbing rather than holding steady, the email bounce rate diagnosis separates list-quality bounces from refusals caused by the sender's own identity or reputation.

Common mistakes

Each of these erodes either deliverability or the consent position, and both take far longer to repair than to protect.

  • Deleting unsubscribes. The record that prevents re-adding them disappears. Suppress instead.
  • Suppression that does not sync. An address removed in one tool is emailed from another.
  • Relying only on opens. Some clients report opens unreliably. Use clicks and purchases too.
  • Re-permission dressed as a promotion. It confuses the ask. Keep it short and plain.
  • Removing quiet customers. Some buyers never click. Check purchase data before removal.
  • Importing without consent data. Event and partner lists often arrive without records. Check before sending.
  • Cleaning only before big sends. Occasional purges cause sudden list swings. Run the pass every month.

Frequently asked questions

How often should I clean my email list?

Process bounces, complaints and unsubscribes after every send, because those must stop quickly. Run the fuller pass on inactive contacts and consent records monthly, so the list never drifts far from healthy.

Should I delete contacts who unsubscribe?

No. Keep them on a suppression list so they are never emailed again, even if they reappear in an import. Deleting them entirely removes the record that stops them being re-added by mistake.

What is a re-permission campaign?

A short message to contacts who have not engaged for a long time, asking them to confirm they still want to hear from you. Those who confirm stay; those who do not are moved out of regular sends, which protects deliverability and keeps the list to people who want it.

Terms used on this page

Where this page is used

Also related

Sources

  1. Direct marketing guidance — Information Commissioner's Office (UK)
  2. CAN-SPAM Act: A Compliance Guide for Business — Federal Trade Commission
  3. Regulation (EU) 2016/679 (GDPR) — EUR-Lex

Related