What a tracker is for, and what it cannot tell you
A tracker answers one kind of question: has what category buyers remember about the brand changed, relative to competitors, over time? The awareness and lift guide explains why that matters. Unaided awareness among category buyers reflects whether the brand comes to mind when a need arises; consideration and associations show whether it is becoming known for the right things. Platform dashboards and branded search hint at these; only a survey asks people directly. The brand measurement hub places the tracker among the other brand measures and notes that the leadership measure is usually awareness or consideration among the strategy's audience.
A tracker cannot tell you why a measure moved on its own, or which campaign caused it. It shows a change and its uncertainty; explanation comes from setting it beside reach, share of voice and what the brand and its competitors did, which is the work of the quarterly brand health report. It cannot measure what it does not ask, so questions added later have no history. And it can only be compared with itself: a figure from a different survey, population or question wording is a different number. Within one wave, though, the guide to reading a brand funnel reads the awareness, consideration and preference questions together, as conversion from one stage to the next for the brand and each competitor. Where the question is what people say about the brand unprompted rather than what category buyers remember, the comparison of brand trackers and social listening sets out when each method fits.
Treat the tracker as a measurement plan in the sense of the measurement plan framework: the question, the measure, the baselineAn estimate of what a metric would have done without a given change, campaign or promotion, against which the effect is measured., the method and the review date are named before any activity it will judge.
Before you start
Have the one-page brand strategy to hand, written as the brand strategy guide describes, with the audience, position and the distinctive assets the brand is building. A tracker without a strategy has no definition of its population and no list of associations to measure. Read the survey and questionnaire design guide for the craft of writing questions and the professional codes, and the research design and brief guide for how a research project is scoped.
Agree who owns the tracker, who will read it and what decisions it will inform, such as the brand budget, the creative and the media plan. Find the dates of planned brand activity, because the baseline has to come before it. Agree with whoever handles data protection how responses will be handled. Respondents' answers can be personal dataAny information relating to an identified or identifiable living person, such as a name, email address, location data or an online identifier. when they can be linked to a person, and the survey design guide states, from the MRS and ESOMAR codes listed in this page's sources, that participation is voluntary and informed, respondents are told who is asking and why, research is never used as a cover for selling, and extra care is taken with children and vulnerable people.
The steps
Write the questions the tracker must answer
Write, in plain sentences, the short list of business questions the tracker exists to answer. Is the brand coming to mind for more category buyers? Is it gaining on its main competitor? Is it becoming known for the association the strategy chose? Are the distinctive assets being linked to the brand? Is consideration following awareness? Each later choice is tested against this list: a survey question that answers none of them does not belong in the tracker.
Define the population and the screener
The population is the strategy's audience, drawn wide. The brand strategy guide reports the Ehrenberg-Bass Institute's argument that brands grow by reaching all buyers of the category, most of whom buy rarely, so the population is people who buy or are about to buy the category in the markets that matter, not the brand's own customers. Write screener questions that identify them, such as recent or planned purchase of the category, and place them first. Avoid naming the brand in the screener, because it prompts the unaided questions that follow. A survey of the brand's own customers is a different instrument, drawn from the business's records as the tutorial on drawing a survey sample from a customer list describes.
Choose the competitor set
List the brands category buyers actually consider, including the large ones and any alternative that is not a brand in the usual sense, such as a retailer's own label or doing nothing. The share of voice guide warns that a flattering denominator produces a misleading figure; the same is true here. Keep the set short enough to ask about each brand properly, and expect it to stay fixed for as long as the tracker runs.
Build the question order: unaided before aided, brand before stimulus
The awareness and lift guide sets the order. Ask unaided awareness first, naming the category and inviting any brands that come to mind, with no list on screen. Then aided awareness, showing the competitor set. Then consideration and preference. Only after the brand questions show any stimulus, such as an asset or an advert. Each step prompts the next, so reversing any of them contaminates the answers that follow. Keep the wording and the order identical in every wave.
Add association and asset questions sparingly
Associations tell you whether the brand is known for the right things. Ask which brands people link to the few associations the strategy chose, and, from the mental and physical availability framework, which brands come to mind in the buying situations that matter, such as a particular occasion or need. Add asset recognition as the distinctive brand assets framework describes it: show each asset unbranded, as a plain colour patch or a shape without the logo, and ask which brand it belongs to. Every question adds length, and long surveys tire respondents, so choose the few that answer the questions from the first step.
Reason the sample and cadence from the movement you need to see
Neither the sample sizeThe number of users or sessions an experiment needs to detect a given effect reliably. nor the cadence has a correct value; both follow from what the tracker must detect. Decide the size of change that would matter to a decision and the smallest group you will report on. Then, with the help of whoever runs the fieldwork, choose a sample per wave large enough that such a change would stand clear of the noise, read with a confidence intervalA range of values for an effect, such as a lift in conversion rate, that is consistent with the data at a chosen confidence level. as the guide to reading small numbers explains. Set the cadence by how fast the measures can move and when decisions are made: the awareness and lift guide warns that too frequent wastes money and too rare hides the effect of a campaign. Keep the season of each wave consistent.
Write the research brief and choose a supplier or panel
Write a brief with the research brief template: the decision, the research questions, what is already known, the population and screener, the method, the questionnaire, the timing, the consent and data handling, and the deliverables. Send it to the suppliers you are considering and ask how they would recruit the population, how they would keep the sample consistent between waves, how they check that respondents are genuine and attentive, and how they meet the professional codes. Choose on those answers as well as on price.
Pilot the questionnaire
Before the baseline, run the questionnaire with a small group from the population and read every answer. Look for questions people misread, lists that are too long, a screener that lets the wrong people through or keeps the right people out, unaided answers that show the brand was prompted earlier than intended, and asset stimuli that are recognised for the wrong reason. Fix what the pilot shows now, because after the baseline every fix is a break in the series.
Run the baseline before new activity
Field the first wave before any new brand activity starts, as the awareness and lift guide insists. Without it, there is nothing to compare later waves with, and any change can be argued either way. Report the baseline with its intervals, by competitor, and record the date, the sample achieved and anything unusual in the market at the time.
Freeze the questionnaire and keep a change log
After the baseline, freeze the questionnaire, the order, the screener, the competitor set and the sampling approach. Keep a change log that records every change, the reason and the wave it took effect in, and every event that could affect results, such as a competitor launch or a press story. When a change cannot be avoided, add rather than replace where you can, and run old and new versions side by side for a wave before retiring the old one. Before each new wave goes to its sample, the survey launch checklist is a short gate for confirming the freeze, the draw record and the invitation still hold.
A questionnaire map
The map below sets out the order of a typical tracker. It is a structure, not a fixed list; the questions in each block come from the first step.
| Block | What it asks | Why it sits here |
|---|---|---|
| Introduction and consent | Who is asking, why, how answers are used | Required before any question, as the professional codes set out |
| Screener | Category purchase or plans, markets, any exclusions | Defines the population without naming the brand |
| Unaided awareness | Brands that come to mind for the category, no list shown | First, so nothing has prompted the answer |
| Aided awareness | Which of the competitor set the respondent has heard of | After unaided, so the list does not contaminate it |
| Consideration and preference | Which brands they would consider or prefer | Follows awareness, still before any stimulus |
| Buying situations and associations | Which brands come to mind for the chosen situations and associations | Measures what the brand is known for |
| Asset recognition | Unbranded assets shown one at a time, with the brand named by the respondent | After the brand questions, because the stimulus prompts |
| Advertising recall | Recall of advertising in the category, optionally with stimuli | Late, because showing ads prompts everything above |
| Profile | Questions needed to describe and weight the sample | Last, to keep the start of the survey short |
A kitchen appliance maker sets up its tracker (illustrative)
Zephrandle Kitchens sets up its tracker before its first television flight
Zephrandle Kitchens, an invented kitchen appliance maker, plans its first television campaign for the autumn. In spring the brand manager writes 4 questions for the tracker: does the brand come to mind for more cooker buyers, is it closing on its largest rival, is it becoming known for "cooks evenly", and is its copper-coloured dial linked to it? The population is people who bought a cooker in the last 2 years or plan to buy one in the next 12 months, screened by purchase questions that do not name any brand. The competitor set has 4 brands, including a retailer's own label. Unaided awareness comes first, then aided, consideration, 2 buying-situation questions, the association question and 2 unbranded asset questions showing the dial and the brand's handle shape. Working back from the change in unaided awareness that would justify the next year's budget, the team and its fieldwork supplier settle on 800 respondents a wave, quarterly. The pilot with 40 respondents shows that the dial is often named as a rival's, because the photograph includes a hob the rival also sells; the stimulus is reshot on a plain background. The baseline wave runs 6 weeks before the first flight and records unaided awareness of 11%, with an interval of about 2 points either side. The change log's first entry, a year later, records a new competitor added alongside the original 4, with both versions of the aided list run for one wave.
Common mistakes
- No baseline. A tracker started after the campaign cannot show what the campaign changed.
- Surveying customers instead of the category. The brand's growth comes from people who are not yet its customers.
- Naming the brand before the unaided question. A screener or introduction that mentions the brand inflates unaided awareness.
- A flattering competitor set. Leaving out the brands people actually consider makes every figure look better than it is.
- Too many questions. Each one adds length and tiredness. Keep the ones that answer the tracker's questions.
- Branded stimuli for asset questions. An asset shown beside the logo measures the logo.
- Choosing sample and cadence by habit. Work from the movement that would matter and the smallest group reported, and read with intervals.
- Changing the questionnaire quietly. Every change breaks the series; log it, and run old and new together when a change is unavoidable.
