Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

LinkedIn Marketing › LinkedIn Ads

Structuring a LinkedIn Ads Account

How to structure a LinkedIn Ads account: campaign groups as the plan, campaigns by stage and audience, exclusions between them, ads in rotation and clear names.
Guideintermediate9 min readUpdated

What the group, the campaign and the ad each decide

Four guides on this site each state one rule about LinkedIn account structure. The campaign objectives and formats guide says a sequence should be separate campaigns with separate objectives joined by retargeting. The targeting and Lead Gen Forms guide says overlapping campaigns bid against each other and that stage audiences need exclusions. The account-based marketing guide uploads each tier as its own list so campaigns can be built per tier. And the diagnosis of a campaign that is not spending notes that a campaign group has its own dates and budget. This guide puts them together into one account.

LevelWhat it decidesWhat it should represent
Campaign groupIts own dates and budget, which apply to everything inside itA chapter of the plan: a stage, a market, a product line or an account tier
CampaignObjective, audience, budget, schedule and bid; which formats are offeredOne stage for one audience with one offer
AdThe creative and the destination, form or pageOne version of the message, in rotation with others
Account-level assetsMatched Audiences, conversions, forms, the Insight TagShared resources each campaign draws on

The account itself, its owner and its access are set up in the Campaign Manager setup tutorial, and a first single campaign is built in the tutorial on launching a first LinkedIn Ads campaign. This guide is for the point after that, when there are several campaigns and the question is how they fit together. The documented limits on how many groups, campaigns or ads an account can hold, and the minimum audience sizes, are in LinkedIn's Marketing Solutions Help; this page does not quote them.

Campaign groups as the chapters of the plan

A campaign group is easiest to use well when it stands for a decision the business makes about money and time. Typical chapters are a funnel stage in one market, a product line, or a tier of an account-based programme. Because the group carries its own dates and budget, it is the natural place to say "this stage runs this quarter with this much", and every campaign inside it inherits the limit. The see-think-do-care framework is a useful way to name the stages: people who could buy one day, people thinking about the problem, people ready to act, and existing customers.

Groups organised by month or by whoever built them tell the reader nothing. An account whose groups are named for stages and markets can be read by a new manager in minutes; one whose groups are dates and initials has to be reconstructed from the campaigns inside them. The paid social account management playbook treats the structure as part of the monthly routine for this reason: the structure is what the review reads. When an inherited or long-running account needs a fuller review, the LinkedIn Ads account audit scorecard rates its campaign groups and exclusions between stages alongside tracking, targeting and lead sync.

Campaigns split by stage, audience and offer

Objective, audience, budget, schedule and bid are set per campaign, and the formats on offer depend on the objective. That makes the campaign the level where a split is either necessary or wasteful. Split when one of these changes:

  • The stage. Awareness, consideration and conversion need separate objectives, so they need separate campaigns. The recommended setups for awareness and consideration show what each stage's campaign looks like.
  • The audience, where the message changes with it. Operations leaders and finance leaders at the same companies may need different arguments. If they need the same argument, one campaign serves both.
  • The offer. A guide, an event invitation and a demo request attract different people and are judged on different results, so each deserves its own campaign and its own conversion.
  • An account-based tier. The ABM guide builds campaigns per tier so spend and engagement can be read tier by tier.

Do not split for its own sake. LinkedIn audiences are small, and the targeting guide warns that two campaigns with overlapping audiences bid against each other and show both ads to the same members, raising Frequency without adding reach. Several campaigns aimed at slices of one small audience each get too little delivery to learn from, and some may stop spending altogether. The test before creating a campaign is simple: does it need a different objective, message or offer? If not, it is an ad, not a campaign.

Exclusions that keep stages apart

A staged account depends on each member being in one stage at a time. The targeting guide describes the mechanism: engagement and website retargeting audiences carry members between stages, and exclusions, which are applied last and remove members whatever else matches, keep them from being shown the earlier stage's ad as well. A member who watched the awareness video should leave the awareness campaign and appear only in the consideration one; a member who submitted the lead form should leave the lead campaign.

Plan the exclusions as part of the structure rather than adding them campaign by campaign:

CampaignIncludesExcludes
AwarenessThe defined market audienceEngaged members, converters, customers, staff
ConsiderationEngaged members: video viewers, document readers, page or site visitorsConverters, customers, staff
ConversionMembers who reached the consideration ruleRecent converters, customers, staff
CustomerUploaded customer listNobody beyond staff

These retargeting audiences are LinkedIn's form of Remarketing, and the guides note that they fill slowly, so a consideration or conversion campaign built on them will deliver little at first. Build the audiences early, before the campaigns that need them, and expect the later stages to grow as the earlier ones feed them. The ABM guide applies the same idea to tiers, excluding each tier from the others' campaigns so an account is worked at one level of effort.

Ads per campaign and rotation on small audiences

Small audiences see the same ads often. The objectives guide's advice is to rotate before fatigue: have the next version ready before the current one tires, and read frequency alongside cost. In structure terms, that means each campaign runs a few ads that say the same thing in different ways, with replacements prepared before they are needed. Creative Fatigue shows as results that drift down while frequency climbs, and the diagnosis of rising LinkedIn Ads costs traces higher prices to the same pair of causes among others.

Too many ads in one campaign is the opposite problem: each gets a sliver of a small audience and none produces enough to compare. Keep the number of live ads in proportion to the audience and budget, judged on the account's own history rather than a rule of thumb, and retire an ad when its replacement is ready rather than leaving it to run down. The reach and frequency calculator helps estimate how often a given budget will show the audience each ad.

Budgets and dates at the right level

Money and time can be set at two levels: the group, with its own dates and budget, and the campaign, with its daily or lifetime budget inside a schedule. Use the group for the ceiling the business agreed for a chapter and the campaign for how that ceiling is shared. Setting both carelessly creates conflicts that look like delivery problems: a campaign scheduled beyond its group's end date stops when the group does, and the not-spending diagnosis lists a group that is paused or ended among the reasons a campaign shows no delivery.

Decide the split between stages from what each stage is for, not from equal shares. Awareness is judged on reach among the right roles and conversion on accepted leads, so their budgets answer different questions. The CPA calculator helps check whether the conversion stage's budget can buy leads at the cost the business can afford, which the LinkedIn Ads hub works back from the value of a deal.

Names that let reports roll up

Names are the structure that reports can see. A Naming Convention that puts the same fields in the same order at every level, for example market, stage, audience, offer and date, lets a spreadsheet or a dashboard add up spend and results by stage, market or tier without anyone retyping them. The principles are in the naming conventions and UTM guide and, for another platform, in the Google Ads naming conventions guide; the same fields should appear in the UTM values, so analytics and the CRM can join the platform's figures to the leads they produced.

Write the convention down once, use it in the paid social campaign build sheet and let the LinkedIn Ads launch QA checklist check it on every build. Name audiences, conversions and forms by the same rules, since they are shared across campaigns and are hard to tell apart later. TikTok accounts follow the same logic with their own levels, set out in the TikTok campaign structure guide.

A freight software vendor's account map (illustrative)

Illustrative example — not a real result

Praxendo Freight Software replaces a flat list of campaigns with a staged account

Praxendo Freight Software, an invented vendor of freight management software, has run LinkedIn ads for a year. Its account holds 23 campaigns in 1 campaign group, named by launch date, several aimed at overlapping audiences. The monthly report cannot say what each stage costs, and frequency on its main audience has risen for 3 months in a row. The marketing manager rebuilds the account for its home market.

GroupCampaignsExclusions
UK-AwarenessUK-AW-Ops-Video; UK-AW-Fin-VideoVideo viewers who watched most of a video, converters, customers
UK-ConsiderationUK-CO-Ops-Document; UK-CO-Fin-DocumentConverters, customers
UK-ConversionUK-CV-Ops-DemoForm; UK-CV-Fin-DemoFormLeads from the last 90 days, customers

Operations and finance roles get separate campaigns because their ads make different arguments; each campaign runs 3 ads with a fourth ready. The group budget is set from the quarterly plan, with 50% to awareness, 30% to consideration and 20% to conversion while the retargeting pools fill. After 2 months the report sums spend and accepted leads by stage from the names alone: £6,200 on conversion campaigns for 21 accepted leads, and a consideration pool that has grown each week. Average frequency in the awareness campaigns falls once video viewers move out of them.

Common mistakes

  • Campaign groups named by date or builder. The group should say which chapter of the plan it holds.
  • A campaign for every slice of a small audience. The campaigns bid against each other and none learns anything.
  • One campaign for every stage. A single objective cannot serve awareness, consideration and conversion.
  • Stages without exclusions. Members see every stage's ads at once, frequency climbs and the sequence never happens.
  • Building later-stage campaigns before their audiences exist. Retargeting pools fill slowly; build them first.
  • A single ad per campaign. It tires on a small audience with nothing ready to replace it.
  • Campaign dates outside the group's. The campaign stops when the group does, and it looks like a delivery fault.
  • Names that differ between levels or from the UTM values. Reports cannot add up what the names do not connect.

Frequently asked questions

What is a campaign group in LinkedIn Campaign Manager?

It is the level above campaigns that holds them together and carries its own dates and budget. Use it for a chapter of the plan, such as one market's awareness, consideration or conversion stage, or one account-based tier, so that its dates and budget control everything inside it and its name lets reports add up the campaigns beneath.

Should each audience have its own LinkedIn campaign?

Each audience that needs a different message, offer or objective should, because objective, audience, budget and bid are set per campaign. But LinkedIn audiences are small, and splitting one audience into many campaigns makes them bid against each other and leaves each too thin to learn from. Split where the message or the stage changes, not for its own sake.

How many ads should a LinkedIn campaign run?

Enough to rotate before the audience tires of the first one, and few enough that each gets a fair share of a small audience. LinkedIn does not publish an ideal number for every account. Watch frequency and the trend in each ad's results against the campaign's own history, and have the next version ready before the current one declines.

Terms used on this page

Tools to try

Frameworks

Also related

Sources

  1. LinkedIn Marketing Solutions Help — LinkedIn
  2. LinkedIn Ads — LinkedIn Marketing Solutions

Related