Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

LinkedIn Marketing › LinkedIn Ads

Launching a First LinkedIn Ads Campaign

A step-by-step first LinkedIn Ads campaign: what a lead may cost, the objective, a defined audience, format and offer, the bid, tracking and a quiet first week.
Tutorialbeginner11 min readUpdated

What a first LinkedIn campaign is for

The LinkedIn Ads hub explains why LinkedIn reach is expensive: audiences are narrow, the advertisers competing for them sell high-value products and the feed has less time to sell. The first campaign exists to find out whether that price works for this business. It is a test, not a launch of the whole programme, and its design follows from that: one objective, one audience, one offer, a ceiling on spend and a decision at the end about whether to continue, change or stop.

Everything in it is explained elsewhere on this site as reasoning. The campaign objectives and formats guide covers what each objective and format is for; the targeting and Lead Gen Forms guide covers facets, exclusions and forms; the objective setups recommend a full configuration for lead generation, traffic, awareness and consideration. This tutorial does not repeat them. It puts the decisions in the order a first-time advertiser has to make them and points to the page that explains each one.

DecisionMade inExplained in
What a lead may costA spreadsheet, before Campaign ManagerThe LinkedIn Ads hub's cost logic
ObjectiveThe campaign's first screenCampaign objectives and formats guide
Audience and exclusionsThe targeting section, with the forecast panelTargeting and Lead Gen Forms guide
Format, offer and form or pageThe ad and its destinationThe objectives guide and the objective setups
Budget, schedule and bidThe budget and bidding sectionThe LinkedIn Ads hub's bidding section
TrackingThe conversion and destination settingsThe Insight Tag tutorial
Follow-upOutside LinkedIn, with salesThe inbound lead handling playbook

Before you start

  • An ad account owned by the business and associated with the company page. The Campaign Manager setup tutorial sets it up; the company pages guide notes that LinkedIn requires a page to run Sponsored Content and that lead gen forms attach to it.
  • The Insight Tag installed and a conversion defined if the campaign will send people to the website; the tutorial on setting up the Insight Tag and conversions does that.
  • The value of a typical deal and, from the CRM, how many leads tend to become opportunities and how many of those close.
  • A list of target companies, if the business sells to a known set of firms, and a list of current customers to exclude.
  • One offer worth a buyer's details: a useful guide, a short consultation, a demonstration.
  • A named person in sales who will follow up every lead the campaign produces.
  • The paid social campaign build sheet, to record each decision as you make it.

The steps

  1. Work out what a lead may cost from the value of a deal

    Start from the money, because LinkedIn only makes sense when a converted lead is worth more than the price of reaching it. Take the average value of a deal, the share of opportunities that close and the share of leads that become opportunities, and work backwards to the cost per acquisition (CPA) the business can afford and then the cost per lead the campaign must hit. The hub sets out the arithmetic and the CPA calculator does the division. The glossary entry on CPA in LinkedIn Ads explains what Campaign Manager's cost per lead does and does not measure, which matters when you later compare its figure with yours. Use the business's own figures from the CRM; if it has too few deals to know them, write down an honest estimate and mark it as one.

  2. Write the goal, the KPI and the budget ceiling

    Write one sentence that says what the test must show, one key performance indicator (KPI) it will be judged on and the most the business will spend before deciding. For a lead campaign the KPI should sit where a lead becomes useful, such as leads sales accepts or opportunities created, not cost per click. The measurement plan framework gives the format, and the marketing funnel framework helps place the test at a stage. The ceiling is the business's choice, not a figure from this page; LinkedIn documents its own minimum budgets in the help centre. Agree the sentence with whoever signs off the spend, so that the end of the test is a decision rather than a debate.

  3. Choose the objective from the outcome

    Campaign Manager asks for the objective first, and the hub explains why it matters: it sets what the campaign is optimised for, how it is billed and which formats it may use. LinkedIn groups objectives into awareness, consideration and conversions. Pick the one that matches the outcome in the goal sentence. If the goal is leads, use lead generation for a form or website conversions for a page, not website visits because clicks look cheaper; the objectives guide calls that the commonest trap. Each objective setup page recommends the rest of the configuration for that objective, so open the matching one and keep it beside you for the remaining steps.

  4. Create the campaign group and name everything

    Create a campaign group for the test. A group carries its own dates and budget, and the diagnosis of a campaign that is not spending lists a paused or ended group among the reasons a campaign shows no delivery, so set its dates to cover the whole test. Then name the group, the campaign and each ad with a Naming Convention written down before the first campaign exists: market, stage, audience, offer and date in a fixed order. The naming conventions and UTM guide sets out the principles. Names chosen now are the ones every later report will be sorted by.

  5. Build the audience from function, seniority and a company list

    Set the required location first, then describe the person and the employer. The targeting guide recommends job function plus seniority for the person and company attributes, or an uploaded company list, for the employer. Values within a facet are combined with OR and facets with AND, and exclusions are applied last, so exclude current customers, competitors and your own staff. Watch the forecast panel as you build: it shows the audience's size and make-up, and Campaign Manager will not run a campaign below the documented minimum. Titles look precise but match narrowly, so a title-only audience is often smaller than the population it is meant to describe. Aim for the people who buy, not everyone who could be interested.

  6. Set audience expansion and the Audience Network on purpose

    Audience expansion lets LinkedIn add members similar to the ones targeted, and the LinkedIn Audience Network extends delivery to partner sites and apps. The targeting guide notes that Campaign Manager may pre-select either depending on the objective. For a first test, check both and decide deliberately, usually by leaving them off until the core audience is proven, because a result that mixes the chosen audience with lookalikes and partner placements cannot say whether the chosen audience works. Write the choice into the build sheet.

  7. Choose the format, the offer and the form or page

    Choose one format from those the objective offers. The objectives guide recommends single image ads as the place to start and document ads for content-led lead generation, because the member gets something before being asked. Make one offer, phrased the same way in the ad, the headline and the form or page. Then choose the destination. A Lead Gen Form keeps the member on LinkedIn, pre-filled from the profile; a landing page suits an offer that needs explaining. The comparison of Lead Gen Forms and landing pages sets out the trade. If you use a form, keep the fields few and add one question that separates buyers from the curious, as the lead generation setup recommends. Prepare a second version of the ad now, so you have something to rotate to later.

  8. Set the budget, the schedule and the bid

    Set a daily or lifetime budget inside a schedule that matches the group's dates. LinkedIn documents maximum delivery, a cost cap and manual bidding, and Campaign Manager shows a suggested bid range for the audience. A cost cap set from the cost per lead you worked out in the first step is a sensible start for a lead campaign, provided it sits within the suggested range; a bid or cap far below the range may win little or nothing. For a traffic test, the CPC calculator helps judge what a click can bear, using the CPC the business can afford rather than one copied from another platform. The hub warns that pacing is uneven, so expect underspend on early days.

  9. Tag every destination and attach the conversion

    If the ad sends people to the website, add UTM parameters to every link using the naming convention, so analytics can tell this campaign apart from everything else. Attach the website conversion you defined to this campaign; a conversion reports only against the campaigns it is attached to. For a Lead Gen Form, check that the form's leads will reach the CRM, by integration or by a download someone owns, before any lead arrives. The Insight Tag tutorial explains attachment and tests; nothing in this step should be the first time the tag is checked.

  10. Run the launch checklist and agree who follows up

    Run the LinkedIn Ads launch QA checklist line by line: objective, audience, exclusions, expansion, ads in every placement, form, tracking, names and budget. Submit a test lead and trace it to the CRM. Then agree the follow-up with the named salesperson: how fast a lead is contacted, what counts as accepted and where the reason for rejecting one is recorded. The inbound lead handling playbook sets out the routine, and the paid campaign launch SOP the wider sign-off. A campaign whose leads wait a week for a reply is a test of the sales process, not of LinkedIn.

  11. Leave the first week alone, then read it against the CRM

    Launch and stop touching it. Delivery in the first days is uneven, and every change to bid, audience or ad resets what you are trying to learn. Check daily only for blocks: an ad not approved, a group outside its dates, a billing hold. If the campaign barely spends, the not-spending diagnosis works through the causes in order. After a full week, read the campaign against the CRM rather than inside Campaign Manager alone: leads, leads accepted, and what happened to each. Repeat the read weekly until the test has produced enough leads to decide, then make the decision the goal sentence asked for.

If the test earns a second campaign, and then a third, the account needs a shape: groups for stages or markets, exclusions between them and names that let reports add them up. The guide to structuring a LinkedIn Ads account takes over from here.

Boosting a post or building in Campaign Manager

The company pages guide notes that LinkedIn documents boosting a page post as a quick route into Campaign Manager, putting the page's best organic content in front of a chosen audience. It is a reasonable way to learn the platform with a post that has already earned attention. It is not a substitute for the build above when the goal is leads.

QuestionBoosting a page postBuilding in Campaign Manager
Starting pointA post already published on the pageA goal, an audience and an offer chosen for the test
Best fitExtending reach for content that did well organicallyA lead or website conversion test judged on pipeline
ControlThe options the boost flow offersObjective, audience, exclusions, format, form, bid and tracking
What it teachesWhether paid reach adds readers for good contentWhether the business can buy leads at an affordable cost

If you boost, do it on purpose: choose a post with a clear message, pick the audience as carefully as in the audience step and read the result as reach and engagement from the right roles, not as a lead campaign that happened to be cheap.

An HR advisory firm's first campaign (illustrative)

Illustrative example — not a real result

Ombrisca Advisory works back from a retainer and reads its first week on accepted leads

Ombrisca Advisory, an invented HR advisory firm for small manufacturers, sells an annual retainer worth £9,000 on average. Its CRM shows 1 in 3 opportunities closing and 1 in 4 leads becoming an opportunity. Allowing a fifth of first-year value for acquisition gives £1,800 per client, so £600 per opportunity and £150 per lead. The partners set a test ceiling of £3,000 over 6 weeks.

DecisionChoice
GoalLearn whether operations and HR managers at target firms ask for a review at under £150 per lead
KPILeads accepted by the partner who follows up
ObjectiveLead generation
AudienceLocation set to the home market; HR and operations functions; manager seniority and above; a list of 400 manufacturers; customers excluded
Expansion and Audience NetworkBoth off
Format and offerDocument ad: a 6-page guide to shift-pattern rules, first 2 pages open, the rest behind a short form with 1 question on headcount
BidCost cap of £140, inside the suggested range
Follow-upThe partner calls within 1 working day and records accepted or rejected in the CRM

The first week spends unevenly and the partners leave it alone. By week 3 the campaign has produced 17 leads at £128 each; the partner accepts 9. On cost per lead the campaign is inside the ceiling; on accepted leads it costs about £242 each, which the partners judge against the £600 they can pay per opportunity. They keep the campaign running for the rest of the test and prepare the second ad version for rotation.

Common mistakes

  • Opening Campaign Manager before working out what a lead may cost. Without the number, every result looks either cheap or expensive by feel.
  • Choosing website visits for a lead goal. Clicks are cheaper and come from people who click; the leads cost more in the end.
  • An audience built from job titles alone. It matches narrowly and is often smaller than it looks.
  • Leaving expansion and the Audience Network as they were pre-selected. The test then cannot say whether the chosen audience works.
  • Several offers in one test. With small numbers, nothing can be learned about any of them.
  • No named person to follow up. Leads that wait turn a test of LinkedIn into a test of patience.
  • Changing bids in the first week. Each change resets the pacing you were trying to read.
  • Judging the test on cost per lead. The goal sentence named the KPI; read leads sales accepts.

Frequently asked questions

How much should I spend on a first LinkedIn campaign?

Enough to learn whether the right buyers respond at a cost per lead the business can afford, and no more than the business can lose without regret. Work out the most a lead may cost from the value of a deal first, then set a ceiling for the test. LinkedIn's help centre documents the minimum budgets and bids it accepts, and the forecast and suggested bid range in Campaign Manager show what the chosen audience is likely to cost.

Should a first LinkedIn campaign use a Lead Gen Form or a landing page?

Use a Lead Gen Form when the offer is easy to understand from the ad, such as a guide or a short consultation, because the form opens inside LinkedIn pre-filled from the member's profile. Use a landing page when the offer needs explaining before anyone would sensibly hand over their details, or when the conversion has to happen in your own system. Either way, add a question that separates real buyers from the curious.

How soon can I judge whether a first LinkedIn campaign is working?

Not in the first days. Delivery on LinkedIn is uneven at the start, so read pacing over a full week before touching bids, and judge results on leads that sales accepts rather than on cost per click. A first campaign usually needs several weeks of leads, read against what happens to them in the CRM, before the answer is clear.

Terms used on this page

Tools to try

Frameworks

Also related

Sources

  1. LinkedIn Marketing Solutions Help — LinkedIn
  2. LinkedIn Ads — LinkedIn Marketing Solutions
  3. Lead Gen Forms — LinkedIn Marketing Solutions

Related