Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Meta Ads › Creative & Formats

Ad Formats and Placements

Meta ad formats and placements: image, video, carousel, collection and Reels across Meta surfaces, aspect ratios, customisation, and choosing by goal.
Guidebeginner11 min readUpdated

Formats and placements: two different decisions

Advertisers new to Meta tend to collapse format and placement into one choice, usually by asking a designer for "a Facebook ad". The platform separates them. The format is set when the ad is built and describes the unit: how many pieces of media it holds, whether they move, whether each piece carries its own link, and whether tapping opens a full-screen experience. The placement is set at the ad set and describes where the unit is eligible to appear. One format can run on many placements, and one placement can show several formats.

The two decisions pull on different levers. Format decides what the ad can say and how: a carousel can walk through four features, a video can show a product in use, a collection can put a shoppable grid under a cover. Placement decides the attention the ad gets and what it costs: a full-screen Reels slot is watched with sound on and competes with entertainment; a right-column slot on desktop is glanced at and priced accordingly. Cost per thousand impressions (CPM) differs by surface, and the CPM calculator is the quickest way to compare what each placement is actually charging once a campaign has run.

The rest of this guide takes the two decisions in turn, then brings them together: which format for which objective, and how to make one ad fit several placements without rebuilding it. Testing which creative wins is a separate subject and lives in the creative testing guide; what to put in the first seconds of a video is the subject of the hooks and user-generated content guide.

The formats

Meta's core formats have been stable for years even as the surfaces multiplied. The catalogue-driven formats that pull products from a feed are covered in the commerce section's catalogue ads guide; the table below covers the formats you build by hand.

FormatBest forAssets needed
Single imageOne clear message or offer; fast production; static placements such as right column and Audience Network bannersOne image per shape (square or portrait for feeds, full-screen vertical for Stories and Reels); primary text, headline, description, call to action
Single videoDemonstration, story, creator content, anything that benefits from motion and soundOne video per shape; a thumbnail; captions or on-screen text for sound-off viewing
CarouselSeveral products, features, steps or testimonials, each with its own card and link; sequential storytellingMultiple images or videos of consistent shape, each with headline, description and link; an optional end card
CollectionMobile commerce: a cover image or video over a grid of products that opens a full-screen Instant ExperienceA cover asset, product images (usually from a catalogue) and the Instant Experience layout
Stories and Reels unitsFull-screen vertical placements where the ad is a swipe or scroll away from organic contentVertical video or image built for the format, with the top and bottom kept clear of essential elements

Three things about the table matter in practice. Formats differ in production cost by an order that has nothing to do with their effectiveness, so a brief should state the format rather than let the cheapest one win by default. A carousel is only a carousel when the cards are distinct; a carousel with one message spread across cards is a slower single image. And the collection format is a commerce tool: without a catalogue and a product grid worth browsing, it adds a tap between the person and the site.

The guide to static image ads covers the single image as a craft, from the one-message rule to legibility on a phone and cheap refreshes. The guide to carousel ads covers when distinct cards beat a single asset, the first card, card order and links, and when a catalog carousel should do the job instead.

Placements and surfaces

Meta groups placements by the kind of surface rather than by app, and the grouping is what matters when preparing assets, because surfaces in a group share a shape and a viewing mode. The exact list changes; Meta's placements documentation is the current reference and Ads Manager shows what is available for a given objective. The groups below are the stable ones.

Placement groupSurfaces (not exhaustive)How people encounter the ad
FeedsFacebook Feed, Instagram feed, Facebook Marketplace, Facebook video feeds, Instagram Explore, Facebook right column, Messenger inboxScrolling a mixed feed; square or portrait units; sound often off
Stories and ReelsInstagram Stories, Facebook Stories, Messenger Stories, Instagram Reels, Facebook ReelsFull-screen vertical; sound more often on; a swipe or scroll removes the ad
In-streamFacebook in-stream video, ads on Facebook ReelsInserted into or around video content; attention is on the content, not the feed
SearchFacebook search results, Instagram search resultsAfter a search within the app; closer to intent than feeds
Apps and sitesAudience Network native, banner, interstitial and rewarded videoInside third-party apps; lowest attention, often lowest cost

Not every placement is available for every objective, format or optimisation goal, and the interface greys out the ones that are not. Partner inventory in apps and in-stream video comes with brand-safety controls: inventory filters that set how strict content adjacency should be, block lists, and publisher lists you can review. Advertisers in regulated categories or with strict adjacency rules usually make their first manual placement decision here.

The split between surfaces is where Meta differs most from video-first platforms. The YouTube ad formats guide describes a system where the format and the viewing mode are almost the same decision; on Meta the same video may run as a feed post, a full-screen Reel and an in-stream interruption, and each needs to be judged separately. For an awareness budget split between the two, the comparison of YouTube and Meta video ads covers which kind of video each suits and how to measure them together.

Aspect ratios and safe zones per placement

Each placement group has a native shape, and Meta documents the recommended ratios and minimum dimensions in its ad specifications. In words: feed placements take square or slightly taller than square units, with the taller portrait shape occupying more of the screen; Stories and Reels take full-screen vertical units; in-stream video takes landscape or square depending on the surface; Audience Network banners and interstitials have their own fixed shapes. Ads Manager previews every placement, and the preview is the reliable check that an asset fits, because the exact ratios Meta recommends have shifted over the years and are best read from the current specification rather than remembered.

Safe zones are the second constraint, and the one most often ignored. In Stories and Reels the app overlays interface elements on the ad: the profile name and progress bar near the top, the call to action, caption and interaction buttons near the bottom and along one side. Meta's guidance is to keep essential text, logos and product shots out of those regions. A feed-shaped asset stretched to vertical with its headline at the bottom will have that headline hidden behind a button on most phones. The fix is to design vertical assets with the message in the middle band and to check the placement preview for each one.

Legibility rules follow from the viewing mode rather than the ratio. Feed ads are watched largely without sound, so captions and on-screen text carry the message; Reels are more often watched with sound, so voice-over can do more work, but the first frame still has to hold without it. Text that is readable on a desktop monitor is frequently unreadable on a phone in a feed, and the preview on an actual phone is the test that catches it.

Advantage+ placements vs manual placement selection

Advantage+ placements, previously called automatic placements, is Meta's recommended setting and the default when an ad set is created. Meta documents that with it the delivery system can show ads across all eligible placements and allocate budget towards those producing the best results at the lowest cost, and that restricting placements reduces the Reach available and can raise costs because the system has fewer opportunities to choose from. The practical reading is that the cheap, low-attention placements are what let the system find inexpensive results, and the expensive, high-attention ones are where the results most often come from; delivery balances the two without your intervention.

Manual selection is the right choice in a few situations. The creative genuinely cannot work on a surface: a detailed landscape explainer video has no business in Stories. Brand-safety rules exclude partner apps or in-stream adjacency, which the inventory filter may not satisfy. The purpose of the ad set is to learn how one placement performs, in which case restricting it is the experiment. Or a specific placement is known from the breakdown reports to drive cheap clicks that never convert, and the click-through rate (CTR) it contributes is flattering the ad set's averages while costing money. Outside those, manual selection is a way of paying more for less reach, and the placement breakdown in Ads Manager is where to check whether a restriction is earning its keep.

Placement customisation: one ad, several crops

Placement asset customisation is the feature that resolves most of the tension in this guide. Meta documents that, within one ad, you can supply different media for different placement groups: a square cut for feeds, a vertical cut for Stories and Reels, a landscape or square cut for in-stream, and so on, and in several cases customise the text per placement as well. The ad remains one ad for delivery and reporting, which means the learning and the budget stay pooled while each surface gets an asset built for it.

The workflow is worth setting up as a habit. Produce the master creative in the richest form, usually a vertical video with the message in the central safe band. Export the crops the placement groups need, checking each in the placement preview. Where a crop would lose the message, replace the media for that group rather than accepting a bad crop. Keep the primary text short enough to survive truncation in the placements that show less of it. The result is an ad that looks native everywhere without the reporting fragmentation of separate ad sets per placement, which is the alternative advertisers used before customisation existed and which still appears in accounts that have not revisited the setting.

Illustrative example — not a real result

A furniture retailer prepares one video for every surface

A furniture retailer films a 20-second product video of a sofa being assembled. The editor exports three cuts: 9:16 vertical for Stories and Reels with the product name in the middle third of the frame, 4:5 portrait for Facebook and Instagram feeds with a caption bar burned in because most feed viewers have sound off, and 1:1 square for in-stream and Audience Network. All three are loaded into a single ad using placement asset customisation, with primary text trimmed to 90 characters so it is not truncated in Marketplace. The placement breakdown after two weeks shows Reels delivering 48% of impressions at a £3.10 CPM and feeds delivering 38% at £7.40, with purchases split roughly in proportion to spend. The retailer keeps Advantage+ placements on and uses the breakdown to brief the next video, rather than restricting to the cheaper surface.

Choosing formats by objective

The objective narrows the sensible formats before any test is run. The table is a starting point, not a rule; the creative testing guide covers how to settle the question for a particular account. For video, the video ad length test settles whether a short or long edit of the same ad works better in the placements a campaign uses.

ObjectiveFormats to start withWhy
Awareness and reachShort video in Stories, Reels and feeds; single image for frequency top-upsMotion and full-screen surfaces hold attention; images are cheap to refresh
Consideration (traffic, engagement, video views)Single video, carousel for multi-point storiesA message with substance needs room; carousel cards give each point a link
Lead generationSingle image or short video with a clear ask; instant forms where the objective supports themThe format should not out-complicate the offer
Online sales, prospectingCreator-style vertical video, carousel of productsDemonstration and proof convert cold audiences; carousels show range
Online sales, retargetingCollection and catalogue-fed formats, carouselPeople already know the brand; show them the products and a direct path
App promotionVertical video showing the app in useThe product is the screen; show it

When the goal is visits rather than conversions, the Meta Ads setup for website traffic shows how to review placements for taps that never become page loads.

Common mistakes

  • One asset for every placement. A feed image stretched into Stories loses its headline behind interface elements; customise or exclude.
  • Choosing format by appearance. Carousel and collection look richer in the preview and do nothing for a single-message brief.
  • Restricting placements by instinct. Excluding Audience Network or right column because they "look cheap" removes the inventory delivery uses to find inexpensive results; check the breakdown first.
  • Ignoring the preview on a phone. Legibility, safe zones and truncation only show up on the device the audience uses.
  • Treating ratios as fixed knowledge. The recommended shapes change; read the current specification and preview rather than relying on an old template.
  • Rebuilding ad sets per placement. Placement customisation keeps learning pooled; separate ad sets fragment it and compete with each other in the auction.

The creative hub sets out how formats, testing and hooks fit together, and the author's Meta Ads expertise page describes how creative choices sit inside the wider account process.

Frequently asked questions

Should I use Advantage+ placements or choose placements manually?

Meta recommends Advantage+ placements, and for most conversion and traffic campaigns that is the right default: the delivery system can move budget to whichever surface is producing results most cheaply, and every excluded placement is reach you cannot buy back. Choose manually when a placement cannot carry the creative at all, when brand-safety requirements rule out partner inventory, or when the objective is specifically to learn how one surface performs.

Can one ad run in feeds, Stories and Reels at the same time?

Yes. Meta will adapt a single asset to each placement, but adaptation means cropping and overlaying interface elements, which is where a feed-shaped image loses its headline in a full-screen vertical slot. Placement asset customisation lets you supply a different crop, or an entirely different video, for each placement group so the ad looks designed for every surface it reaches.

Is carousel better than a single image or video?

Neither is better in general; they answer different briefs. A carousel suits several products, steps or feature points that each deserve their own card and link, while a single video suits one message that needs motion and a hook. Test the question on your own account rather than assuming, and let the objective decide which format is the candidate in the first place.

Terms used on this page

Tools to try

Where this page is used

Part of these learning paths

Also related

Sources

  1. About ad placements — Meta Business Help Centre
  2. Meta Business Help Centre — Meta Business Help Centre

Related