Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Interactive Tools › Reach & Frequency Calculator

Reach & Frequency Calculator for Offline Media

Using the reach and frequency calculator for TV, radio and posters: rating points or station figures as impacts, then the reach a schedule claims tested.
Tutorialintermediate8 min readUpdated

Why offline media changes the calculator's inputs

The default page assumes a platform that estimates an audience and a plan that buys impressions inside it. Linear television and broadcast radio sell something else. A broadcaster sells weight measured in rating points, each expressing what proportion of the trading audience is watching at that moment, and a station sells spots or packages across its dayparts. The buying models and pricing guide notes that total rating points roughly equal reach multiplied by average frequency, so broadcast plans already talk in the calculator's terms even though nobody on them mentions impressions. A total of rating points says how much weight a schedule carries, but not how that weight divides between reach and frequency.

Both inputs therefore have to be rebuilt. The audience is the number of people in the plan's target who live where the broadcast or the station's coverage reaches. The impressions are the rating points turned into exposures among those people, or the station's own estimate of target impacts for its proposed spots.

The reading changes as well. The walk-through for awareness campaigns feeds the calculator a platform's audience and a budget divided by a CPM, and the walk-through for retargeting campaigns a small matched list. A broadcast schedule comes with something neither has: the seller can estimate the reach of the actual spots, by daypart and programme. The calculator sees only the totals, so its answer becomes a test of the seller's figure, and the gap between them says something about how the spots are spread.

The inputs for offline media

Calculator inputOn the default pageFor offline mediaWhere to find it
Audience sizePlatform estimate of the target audienceThe target audience living in the area the schedule covers, from the medium's trading audience or the station's coverageThe broadcaster's or station's audience data for the target in that area
ImpressionsImpressions the plan buysTarget impacts the schedule buys: rating points × target audience ÷ one hundred for television, or the station's estimate of target impacts for the spotsThe seller's schedule with its rating points or impacts

The impressions row is where most errors start. Rating points describe the audience reached as a share, so turning them into impacts means scaling the target's points up to its headcount: take the points, multiply them by the number of target people and divide by one hundred. The divisor comes from the identity above: if total points roughly equal reach, as a percentage, times average frequency, then the points times the target's size, over one hundred, count every exposure among the target, with a person seen twice counted twice. The conversion is valid only when the points and the audience describe the same people in the same area. A schedule priced on a wider trading audience needs its target-only points from the broadcaster before this step.

One consequence is worth writing beside the table. Because the same audience sits inside the impressions and in the audience box, the reach share the calculator returns depends on the rating points alone; the audience only decides how many people that share represents. A schedule of the same weight returns the same reach percentage in a small region and a large one, so a mismatch between the two inputs shows up at once as a reach share that does not square with the points bought.

For radio, enter the station's own estimate of target impacts for the proposed spots, with the target living in the station's coverage area as the audience. For posters, the site owner's estimated target exposures can stand as impressions, though the curve suits them poorly: the guide to buying out-of-home advertising notes that clustering sites in one spot repeats the poster to the same passers-by rather than finding new ones, a pattern the random model does not allow for.

Entering the offline media inputs step by step

  1. Fix the area and the target as one figure

    Take the broadcaster's region or the station's coverage area, not the country, and the target the plan is bought against. Enter the number of target people living there as the audience size.

  2. Convert the schedule's weight into impacts

    For television, multiply the rating points the schedule delivers against the target by the audience just entered and divide by one hundred. For radio, take the station's estimate of target impacts for the spots. Enter the result in the impressions field.

  3. Test the conversion against the points

    Multiply the reach percentage the calculator returns by the average frequency. The product should match the rating points bought; if it does not, one input describes a different audience from the other.

  4. Request the seller's estimate for the actual spots

    Ask the broadcaster or station for the reach and average frequency it expects from the schedule as booked, against the same target and area, and record both sets of figures with the schedule's split by daypart.

A worked offline media example with illustrative inputs

Illustrative example — not a real result

Jousken Motors checks its first television burst

Jousken Motors, an invented regional group of car dealerships, plans its first television burst: three weeks of linear airtime in the one region where all its showrooms sit. The target is adults aged 25 to 64 living in that region, about 850,000 people on the broadcaster's audience data. Of a £150,000 budget, production of the advertisement takes £33,000, leaving £117,000 for airtime, which at an assumed £650 per target rating point buys 180 target rating points.

Converted, 180 points against 850,000 people is 1.53 million impacts. The calculator returns reach of about 83%, some 710,000 people, with an average frequency near 2.2, and the two multiplied give back roughly the 180 points, so the conversion holds. The broadcaster's estimate for the schedule as booked, with most spots in the evening, is 64% reach at an average of 2.8.

From the response to their earlier radio campaigns the dealers set an effective range of two to four exposures over the burst, and their reach goal is 60% of the target. On the broadcaster's estimate the schedule passes the weight test narrowly, with the average inside the range; on the calculator's random spread it would have looked comfortable. The dealers ask for a version with spots spread across more dayparts and keep the plan regional rather than stretching the same airtime budget across the country.

Reach & Frequency Calculator

Open the Reach & Frequency Calculator →

Prefilled with the example's inputs: Audience size 850,000 · Impressions 1,530,000 → Estimated reach 709,496 · Reach % 83.47% · Average frequency 2.1565.

The embedded calculator opens with the dealers' figures. Halve the audience and the impressions together and the reach percentage stays where it is, which is the rating-point arithmetic at work. The cost per point is an assumption, and every figure belongs to the invented dealer group.

Interpreting reach and average frequency for offline media

Begin with the product of the two outputs. Reach as a share multiplied by average frequency should give back the rating points bought, the relationship the buying models and pricing guide describes for television plans. When it does not, the impacts were converted against a different audience from the one entered, and nothing else on the screen deserves trust until that is fixed.

Then set the calculator's reach beside the seller's. The model scatters impressions at random; a real schedule does not. Spots concentrated in a few dayparts meet the same viewers or listeners again and again, lowering reach and raising Frequency, while spots spread through the day meet more different people. The guide to buying radio advertising describes that trade-off and asks stations for the reach and frequency of the proposed pattern itself. Treat the seller's estimate as the planning figure and the calculator's as the check: a gap in the seller's favour deserves a question, and a gap the other way shows what the daypart mix costs in people reached.

The threshold that moves is the weight the reach goal needs. The guide to planning a first television campaign frames it as the weight test: the reach goal sets the weight needed in a given area and period, and the airtime budget, once production is paid for, either buys that weight or does not. Use the seller's reach for the test and the calculator to see where extra points stop adding to Reach and only add frequency among people already reached. The Flighting choice matters too: a short burst concentrates the weight, while the same points spread over months may meet the goal in no single period.

Average frequency is judged against the effective frequency range the message needs, which the comparison of radio and podcast advertising asks the buyer to set; the radio guide sets that range from past evidence. An average hides the spread: in a schedule heavy in a few dayparts, the heaviest viewers sit far above it and many of those reached sit below. The calculator cannot show that distribution, so ask whether the seller can show how much of the target falls within the range.

Finally, keep the media apart. Television, radio and out-of-home each take their audiences from different measurement, and the people they reach overlap in ways none of those sources counts. The guide to reach and frequency across platforms explains why summed reach overstates the people reached and understates frequency, so any combined figure is an estimate with its assumptions written beside it. Comparing the price of each line is a separate job, which the CPM calculator walk-through for offline media handles on a target basis.

Pitfalls when offline media numbers go into the calculator

  • Entering rating points as impressions without the audience. A schedule's points typed straight into the impressions box produce a reach close to nothing. Convert the points into impacts against the target first.
  • Using the whole population instead of the target in the area. A population figure set against impacts converted from the target makes the reach share and the average frequency both look lighter than the schedule delivers, while the head count reached is inflated, and the product of share and frequency stops matching the points.
  • Preferring the calculator's reach to the seller's schedule estimate. The random curve knows nothing of dayparts, programmes or stations, so with clustered spots it flatters reach and understates frequency.
  • Adding reach across television, radio and posters. The same people sit in each medium's audience and each source counts only its own, so summed reach can exceed the target itself.
  • Spreading a small budget across a whole country. A national audience dilutes the same impacts into a handful of rating points that reach few people too few times; concentrate the weight where the test can pass.

Frequently asked questions

How do rating points turn into reach and frequency?

Rating points are roughly the share of the audience reached multiplied by how often each of those people saw the advertisement, so one total can mean many people reached a few times or fewer people reached often. To estimate the split, turn the points into impacts against the target, enter them with that target in the calculator, and set its answer beside the broadcaster's estimate for the real schedule.

How much television weight does a first campaign need?

Enough rating points, in the area and period chosen, to meet the reach goal at a frequency the message can work with. Get the seller to price the weight the goal needs, then subtract production from the budget and see whether what remains covers that price. When it cannot across the whole country, one region bought at full weight usually teaches more than a thin national schedule.

Can the calculator combine reach from television, radio and posters?

No. Each medium's audience comes from its own measurement, and the people the media reach overlap in ways none of those sources counts, so adding the reach figures overstates how many different people were reached. Run each medium separately, compare each with its seller's estimate, and present any combined figure as an estimate with its assumptions stated.

Terms used on this page

Tools to try

Where this page is used

Related