Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Marketing Analytics › Google Analytics 4

GA4 and Google Ads Integration

A step-by-step tutorial linking GA4 and Google Ads: the link, auto-tagging, importing key events as conversions, sharing audiences, Ads reports and checks.
Tutorialintermediate10 min readUpdated

Before you start

  • Roles. You need the editor role or above on the GA4 property and administrative access on the Google Ads account. If the Google Ads account sits under a manager account, decide whether to link the manager (which links every account beneath it) or individual accounts.
  • Key events already defined. Only key events can be imported, so the key events and conversions guide is the prerequisite: the events that represent outcomes must be marked before the import step shows anything.
  • An inventory of existing Google Ads conversion actions. List what the account already tracks through the Google Ads tag, following the conversion tracking setup tutorial if that work has not been done. The point is to avoid importing an action that already exists.
  • Consent and tagging context. Know how consent mode is deployed and whether landing URLs carry manual UTM parameters, because both affect what the link can attribute.
  • A quiet period. Conversion changes alter the data Smart Bidding sees, so plan the import for a time when nobody is about to judge campaign performance on a single week.
  1. Check permissions on both sides

    Open the GA4 property's access management and confirm the account doing the work holds the editor role on the property, not just on a data stream or an account above it. Then open the Google Ads account and confirm administrative access; a standard user can read the conversions page but cannot create actions or accept a link. If an agency manages the Google Ads account through a manager account, the manager's administrator can link all sub-accounts at once, which is cleaner than linking each one. Record who holds which role, because the link will later show "linked by" and someone will ask.

  2. Create the link from GA4

    In GA4 Admin, open the product links area and choose Google Ads links, then start a new link. GA4 lists the Google Ads accounts the signed-in user can administer; pick the account or manager account and continue. The next screen shows the two link settings covered in the following steps, personalised advertising and auto-tagging; leave them visible while you read on, then review and submit. The link appears in the list with a status, and Google Ads shows the property under its linked accounts. Data flows from this point forward; historical cost data is not backfilled, so do not expect last quarter's spend to appear in GA4.

  3. Confirm auto-tagging is on

    Auto-tagging adds a click identifier to every ad landing URL, and GA4 uses it to join the session to the campaign, ad group, keyword and cost data that Google Ads holds. Without it, Google Ads sessions appear only as manually tagged traffic with no cost and no campaign detail. The link setup offers to enable auto-tagging in the Google Ads account; accept it unless there is a documented reason not to. Then check the Google Ads account settings to confirm it is on, and check that the website preserves query parameters through redirects, because a landing page that strips the identifier breaks the join silently. Keep final URLs free of manual campaign parameters; Google documents the precedence when both are present, and in practice mixing them is where campaign names stop matching between the two systems. The comparison of UTM parameters and auto-tagging covers which traffic sources need each method and how to avoid the conflict when both are present.

  4. Set the personalised advertising setting

    The second link setting controls whether GA4 data can be used for personalised advertising in Google Ads, which in practice means whether GA4 audiences are exported to the linked account. Leave it on if audiences are part of the plan. It works together with the property's own data collection settings, where personalised advertising can be allowed or disabled overall and for specific regions; both the property setting and the link setting have to permit it before an audience will appear. If the privacy team has disabled personalised advertising for a region, audiences will exclude people from that region, which is the intended behaviour and worth explaining to the campaign manager before they ask why a list is small.

  5. Import key events into Google Ads

    In Google Ads, open the conversions summary under goals and create a new conversion action, choosing to import from a Google Analytics property. Google Ads lists the key events from linked web and app streams; tick the ones that represent outcomes and import them. Each becomes a conversion action with its source shown as the GA4 property. Open each imported action and set its details: the attribution model that Google Ads will apply to it, its category (purchase, lead and so on, which decides which standard goal it joins), and its conversion window. The counting method and value come from how the key event is defined in GA4, so an event that sends value and currency arrives with revenue attached. The attribution settings guide explains why the model set here is independent of the one in GA4 reports.

  6. Choose primary and secondary actions in Google Ads

    Every conversion action is either primary, which counts in the conversions column and is used by bidding, or secondary, which is recorded for observation only. This is where double counting is prevented. If the account already has a Google Ads tag for purchases, the imported GA4 purchase key event must be secondary, or the two will count each order twice and inflate every cost-per-conversion figure. Decide per action using the decision table below, then check which conversion goals each campaign uses; the account default is usually right, but a campaign with a custom goal selection can quietly ignore the new action. Add a note in Google Ads change history explaining the choice.

  7. Share audiences

    With personalised advertising enabled on the link, every audience in the GA4 property is exported to the linked Google Ads account automatically and appears in Audience manager under the Analytics data segments. Build the audiences with their later use in mind, following the audiences guide: a membership duration that fits the campaign, conditions on events the site actually sends, and a name that tells a Google Ads user what the list contains. A new audience fills from creation onward and Google documents whether any earlier activity is included, so expect small lists at first. Google also documents a minimum size before a list can serve, which is why "cart abandoners in the last day" is often too small to be usable on a low-traffic site.

  8. Read the Google Ads reports in GA4

    Once the link is live, GA4 gains a Google Ads report in the acquisition topic; if it is not visible, an editor can add it from the report library. It shows Google Ads clicks, cost and cost per click alongside sessions, engagement, key events and revenue, grouped by campaign, with dimensions for ad group, keyword and the search query that the join makes available. The Advertising section also lists Google Ads campaigns among paid channels. Read these reports for what they are good at, the on-site behaviour behind each campaign and the CVR from session to key event, and leave bidding decisions to Google Ads, which sees the ad interaction data GA4 does not.

  9. Verify the whole chain

    Verification runs in both directions. In GA4, click a live ad from a clean browser, then confirm in the realtime report that the session carries the Google source, a paid medium and the right campaign name. In Google Ads, open the conversion actions page a day or two later and check that each imported action shows a recording status rather than an inactive one, and that the conversion counts are plausible against GA4's key events for a closed week. Expect a difference, not agreement; the Google Ads versus GA4 numbers comparison lists the causes. Finally, check Audience manager for the exported lists and their sizes, and confirm the Google Ads report in GA4 shows cost for the days since the link.

Which conversions to use for bidding

The import step raises the question of which key events deserve to drive Smart Bidding. The rule is that bidding should optimise toward the outcome closest to revenue that occurs often enough to learn from, and everything earlier in the journey should be observed rather than optimised. This short table is a starting point, not a policy; the Smart Bidding strategies guide covers the data each strategy needs.

Key eventImport it?Primary or secondaryReasoning
purchase with valueYes, unless a Google Ads purchase tag already existsPrimary if it is the only purchase action; secondary alongside a native tagRevenue is the outcome; a native tag with enhanced conversions is usually the stronger bidding signal
generate_lead or a qualified form submitYesPrimary when the lead definition is tightBidding on every form fill rewards junk; bid on the lead the sales team accepts
sign_up for a free accountYesPrimary for product-led businesses, otherwise secondaryOnly the outcome the business values should steer spend
begin_checkoutOptionalSecondaryUseful to observe funnel drop-off per campaign, harmful as a bidding target
add_to_cartOptionalSecondaryA volume signal for new accounts with few purchases, retired once purchases suffice
Phone click or call eventYes, if calls matterSecondary unless calls are the main outcomeObserve first, promote once the call quality is known
view_item, scroll or engaged-session eventsNoNot importedEngagement is visible in GA4 reports already and should never drive bidding
Illustrative example — not a real result

A SaaS firm's first month after import

A subscription software company links its GA4 property to Google Ads and imports two key events: generate_lead for demo requests and sign_up for free trials. It already runs a Google Ads tag for demo requests, so the imported generate_lead is set as secondary and the native tag stays primary; sign_up has no native tag and is made primary with a value of £40 per trial based on historical trial-to-paid rates. Over the first 30 days Google Ads records 212 trials against 231 sign_up key events in GA4, the gap explained by 14 trials from organic and email sessions and 5 that fell outside the 30-day conversion window. The audience "Trial started, not activated in 7 days" reaches 1,900 members by week three and is attached to a remarketing campaign with a cost per activation of £22. The team records the import date in the reporting log and leaves the primary actions untouched for a quarter.

Verify it worked

The last step tests the whole chain. These checks cover the settings.

  • The link shows in GA4's Google Ads links with a status, and Google Ads lists the property under linked accounts.
  • The Google Ads report in GA4 shows campaign detail and cost, which confirms auto-tagging works.
  • Each imported action names the GA4 property as its source. No purchase is primary twice, and change history explains the choice.
  • Audience manager lists the GA4 audiences, with sizes you expect to be small at first.
  • The gap between the two systems splits into causes you can name. The SaaS firm's 231 key events against 212 trials split into 14 and 5.

If it goes wrong

  • The conversions column doubled. An imported action and a native tag are probably both primary. Make the imported action secondary and record the change.
  • GA4 shows no cost or campaign detail. Auto-tagging is off, a redirect strips the identifier, or manual parameters sit in final URLs. Fix whichever applies.
  • The import screen shows no key events. They are probably not marked as key events in GA4. Mark them first, then return to the import.
  • An audience is missing or small. Personalised advertising may be off on the link or property, or the list is still filling. Check Google's current minimum size.
  • A campaign ignores the new primary action. Its custom goal selection probably leaves the action out. Check that campaign's conversion goals.

Next steps

Common mistakes

  • Importing an action that already has a native tag and leaving both primary. The most common cause of a conversions column that doubled overnight.
  • Auto-tagging off, manual tags on. Campaign detail and cost never reach GA4, and attribution falls back to whatever the manual Attribution values say.
  • Bidding on micro-conversions. Smart Bidding will find more of whatever it is pointed at, including cart adds that never become orders.
  • Expecting the two systems to agree. Different models, windows, dates and inputs; explain the gap by cause.
  • Building an audience the day the campaign launches. Lists fill from creation and need to reach the documented minimum size.
  • Forgetting the campaign-level goal selection. A campaign with custom goals ignores a new account-level primary action.
  • Not writing it down. The link date, the imported actions and the primary choices belong in the change log; the GA4 hub sets out the other setup pages that share that log, and the author's Google Ads expertise page shows how the link fits a managed account.

Frequently asked questions

Should I import GA4 key events or use the Google Ads conversion tag?

Use the Google Ads tag for the actions that drive bidding when you can, because it is measured directly by Google Ads and supports enhanced conversions. Import GA4 key events when you want one definition shared with every other channel, when the site team cannot add another tag, or as a secondary action for comparison. Never run both as primary for the same action, or the conversions column counts it twice.

Why do imported GA4 conversions show fewer conversions than GA4 reports?

Google Ads only counts the key events it can join to a Google Ads interaction inside its own conversion window, under the attribution model set on the conversion action, and it reports them on the date of the ad interaction. GA4 counts every key event across all channels on the day it happened. The two figures answer different questions and are expected to differ.

How long before GA4 audiences are usable in Google Ads?

The audience appears in Google Ads shortly after it is created in GA4 and personalised advertising is enabled on the link, but it starts almost empty and fills as people qualify from that point on. Google documents a minimum audience size before a list can serve, so give a new audience time and check its size in Audience manager before building a campaign around it.

Terms used on this page

Frameworks

Where this page is used

Part of these learning paths

Also related

Sources

  1. Google Analytics Help — Google Analytics Help
  2. Google Ads Help — Google Ads Help

Related