Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Marketing Analytics › Measurement Planning

Measuring Webinars and Events

How to measure webinars and in-person events: registration sources, attendance and engagement, offline lead capture, follow-up and the pipeline that follows.
Guideintermediate10 min readUpdated

What an event has to prove

Events cost more than their invoices show: the venue or platform, the stand, travel, speakers, promotion and, above all, staff time. The B2B demand hub lists webinars and events as a channel that mostly creates demand and is also a strong capture moment, which means their results arrive late and through several routes. An event has to prove some or all of the following, and the plan should say which before it starts.

  • It reached the right people. Attending accounts and roles that match the business's target list, not registrations in general.
  • It engaged them. Attendance, time spent, questions asked, meetings at the stand.
  • It started conversations. Meetings booked and held within the follow-up window.
  • It produced or moved pipeline. Opportunities the event started, and opportunities already open where someone attended, read across the Sales Cycle Length.
  • It did so at a cost the business can bear. Cost per attending account, per meeting and per opportunity, comparable across formats.

Some events have other jobs: keeping existing customers close, launching a product to partners, producing recordings for later use. Those jobs deserve their own measures, written down in advance; otherwise every event gets judged on new pipeline and the customer events always look like failures. Choosing formats and topics, promoting each session and running the follow-up belong to the guide to webinars and online events as a channel; this guide measures what they produce. The event marketing plan template gives each event a field for what it must produce and another for its measures and readout date, so the job is written down before promotion starts.

Tagging registrations by source

Every promotion of the event, from the email invitation and the social posts to the partner newsletter and the paid ads, should send people to the registration page through a link carrying campaign parameters. Google's URL builder documentation describes the parameters analytics collects from those links, and the naming conventions guide sets the spelling so that every event's promotion groups correctly. Give each partner, speaker and sponsor its own tagged link, because their audiences are often the most valuable and the easiest to lose in a generic referral line.

The source must then reach the registration record, not just the analytics session. The registration form reads the UTM values from the address and writes them to hidden fields, the same capture pattern the CRM connection guide describes for lead forms, so that the registrant's record in the CRM carries the source of their registration. Hosted registration pages on an event platform's own domain are a common break: the parameters have to be passed through to the hosted page and mapped into the platform's fields, and the result tested with a real registration before promotion starts.

Record the registration in analytics as well. Google's documentation describes events as the way analytics measures specific interactions, so a registration event with the event's name as a parameter lets one report cover every webinar and event. Where registrations are a main route for new contacts, mark it as a key event. Add a "how did you hear about this event" question to the form for registrations whose tracked source is direct or missing; colleagues forwarding invitations are a route no link captures.

Attendance and engagement

Between registration and pipeline sit the steps that show whether the event itself worked. Record each person's status against the event in the CRM, using one status list for every event so that reports can compare them. The guide to campaign records in the CRM designs the records those statuses sit on, from names that match the event's tagged links to cost on the record.

StatusWhat it meansWhere it comes from
RegisteredSigned upRegistration form
Attended liveJoined the live session or visited the standEvent platform's attendance report; scans
Watched on demandWatched the recording after the live sessionEvent platform; analytics events on the recording page
No-showRegistered and did not attend either wayDerived
EngagedMet the business's own engagement rule: asked a question, answered polls, stayed for most of the session, requested a demoEvent platform's engagement data
Meeting heldHad a sales conversation linked to the eventCRM activity

Event platforms report attendance, time in session, questions, poll answers and resource clicks in their own formats. Import them against the registration record after every session, rather than leaving them in the platform where nobody joins them to pipeline. Read attendance by registration source: a source that brings many registrations and few attendees is cheap in the promotion report and expensive in the event report.

On-demand viewing deserves its own line. Recordings attract viewers for weeks after the live session, and those viewers are often people who registered and could not attend. Report them separately from live attendance and keep the reporting window open long enough to count them.

In-person events and offline capture

A trade-show stand, a conference talk or a roundtable produces leads that never pass through a website. The measurement has to be built before the event, because it cannot be reconstructed after. The tutorial on exhibiting at a trade show plans the stand around this capture, from choosing the show by who will attend to a follow-up plan agreed with sales before booking.

  • One CRM campaign per event. Every person met is added as a member with a status from the same list as webinars, so in-person and virtual events report side by side.
  • A capture method that records quality. Badge scans, a short form on a tablet or business cards entered by hand, each with a note field for what was discussed and a quick rating (prospect, existing customer, partner, student, competitor). A scan without a note is a name, not a lead.
  • Codes and tagged links. A short address or a code on the stand and in the talk's slides, carrying campaign parameters for the event, captures visitors who go to the website later rather than at the stand. A code on a printed offer does the same for those who buy or enquire directly.
  • Meetings booked in advance. Invitations to book a meeting at the stand go out with tagged links, so that pre-booked meetings are credited to the event's pre-promotion.
  • An agreed upload time. Scans and notes enter the CRM within a time agreed before the event, with a named person responsible, because follow-up cannot start until they do.

Record the purpose stated to visitors when their details were taken, and follow up within it. Whoever owns privacy in the business decides what that purpose can be and what consent the follow-up needs. For the small events a business hosts itself, the guide to hosting roundtables and customer events covers the guest list, the invitation and running the room that come before this capture.

Follow-up and the pipeline that follows

The event's value depends on what happens next, and follow-up is where much of it can be lost. Measure follow-up directly: the share of attendees and stand visitors contacted, how quickly, the meetings booked and held, and the contacts who became an MQL under the definitions in the lead stages guide.

Pipeline then has to be read in two ways, as the B2B measurement guide sets out. Sourced pipeline counts opportunities whose originating touch was the event; it is the closest the business has to Marketing-Sourced Pipeline for the event and the fairer measure of demand it created. Influenced pipeline counts opportunities where someone from the account attended before the opportunity was created or while it was open; it shows reach into active deals and overstates causation, because some of those deals would have closed anyway. Report both, and say which Touchpoint rule each uses.

State the lag. A webinar's sourced pipeline is not complete until a full sales cycle has passed since the session, so early reports should be labelled as early and compared only with other events at the same age. Read each event as a cohort: the people who attended, followed over the months after it, with pipeline and revenue filling in as they progress. Where the business has enough similar accounts, compare those that attended with those that were invited and did not, and treat the difference as an estimate of the event's effect rather than proof of it.

Reporting an event programme

The report puts every event, virtual and in person, on the same rows, so that formats are compared on what they produce for what they cost rather than on what each team prefers to count.

StageMeasureSourceRead when
PromotionRegistrations by source; cost per registrationAnalytics, CRM, ad platformsDuring promotion
AttendanceLive and on-demand attendance by source; no-show rateEvent platform, CRMAfter each session; on-demand after the viewing window
FitAttending accounts and roles on the target listCRMAfter each session
EngagementEngaged attendees by the business's ruleEvent platform, CRMAfter each session
Follow-upShare contacted; meetings booked and heldCRMWithin the follow-up window
PipelineOpportunities and value sourced, and influencedCRMAt set ages, then after a full sales cycle
CostAll costs including staff time, per attending account, per meeting and per sourced opportunityFinance, CRMQuarterly

The CPA calculator handles the cost-per-outcome arithmetic for each row once the counts are right. Compare formats at the same age and on the same rules; a trade show read after two quarters and a webinar series read after two weeks are not comparable, whatever the totals say. Choosing between the formats before any of them runs is a different decision, and the comparison of webinars and in-person events sets out what each is best placed to produce.

Illustrative example — not a real result

Larchquill Software compares a webinar series with a stand

Larchquill Software is an invented accounting-software firm selling to finance teams at mid-sized companies, with a typical sales cycle of about five months. Over two quarters it runs six monthly webinars and one trade-show stand, and reads both on the same report at the end of the second quarter.

Measure (two quarters)Webinar seriesTrade-show stand
Registrations or scans1,860 registrations640 scans
Attended (live and on demand)1,100 (710 live, 390 on demand)640
Attending accounts520, of which 140 on the target list380, of which 95 on the target list
Meetings held6458
Opportunities sourced22, worth £286,00019, worth £399,000
Opportunities influenced4127
Full cost, including staff time£21,000£48,000
Cost per attending account£40£126
Cost per sourced opportunity£955£2,526

Registrations by source show that partner newsletters brought 270 of the webinar registrations but 46 of the 140 target accounts. The stand's opportunities are larger, and its pre-booked meetings produced 12 of its 19 sourced opportunities. Larchquill keeps both, shifts webinar promotion towards partners, books more stand meetings in advance, and schedules a second read at the end of the third quarter, when the earliest opportunities will have had a full cycle to close.

Common mistakes

  • Judging events on registrations or scans. Both measure promotion and footfall, not business.
  • Losing the source at a hosted registration page. Test that parameters reach the platform and the CRM before promoting.
  • No CRM campaign before the event. Leads captured without a campaign cannot be traced to it later.
  • Scans without notes. A badge scan with no record of the conversation cannot be prioritised.
  • Slow follow-up. Leads contacted after the visitor has forgotten the conversation are leads lost.
  • Reporting only influenced pipeline. It credits the event with deals that were already moving.
  • Reading pipeline too early. Events read before a sales cycle has passed always look weak.
  • Leaving staff time out of the cost. The stand's invoice is a fraction of what it cost the business.

The measurement planning hub places this guide beside the measurement plan and naming conventions it depends on.

Frequently asked questions

Should a webinar be judged on registrations?

Registrations show that the promotion worked; they say little about whether the webinar did. Judge the promotion on registrations and attendance by source, and the webinar on attending accounts that matter to the business, the meetings and opportunities that followed, and the pipeline over the sales cycle. A webinar with fewer registrations from the right accounts can be worth far more than a popular one that reached students and competitors.

How do we stop trade-show leads disappearing after the event?

Set up the CRM campaign and the capture method before the event, agree who uploads the scans and notes and by when, and agree who follows up each kind of lead and how quickly. Event leads are lost in two places: the gap between the stand and the CRM, and a follow-up that arrives after the visitor has forgotten the conversation. Measuring the share of captured leads contacted and the meetings booked makes that gap visible.

Is pipeline influenced by an event a fair measure?

It is a fair measure of reach into active deals, and an unfair measure of causation. Influenced pipeline counts opportunities where someone from the account attended, which includes deals that would have closed anyway. Report it beside sourced pipeline, which counts opportunities the event started, and read both after a full sales cycle. Where the business can, compare similar accounts that did and did not attend, and treat the result as an estimate.

Terms used on this page

Tools to try

Frameworks

Where this page is used

Also related

Sources

  1. [GA4] URL builders: Collect campaign data with custom URLs — Google Analytics Help
  2. [GA4] About events — Google Analytics Help

Related