Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

B2B Marketing › B2B Demand

Exhibiting at a Trade Show

How to plan a B2B trade show: choose it by who attends, book meetings before it opens, staff the stand for conversations, capture leads lawfully, follow up.
Tutorialbeginner11 min readUpdated

When a trade show earns its cost

A show is worth its cost when the people the business needs to meet will be there in numbers, when meeting them in person does something a call or a webinar cannot, and when the business is ready to follow up properly afterwards. Industrial and specialist sectors often meet that test: the manufacturing industry guide explains how the show calendar sets the rhythm of an industrial year, with launches, press coverage and sales meetings timed around the main shows. Elsewhere the case is weaker, and a stand bought because competitors have one is a common way to spend a year's events budget on badge scans.

The decision is easier when the team agrees in advance what the show has to produce. Each job implies a different stand, a different staffing plan and a different way of judging the result.

What the show must produceEvidence it mightHow it is judged afterwards
Meetings with named target accountsTarget accounts appear in the organiser's published visitor profile and in sellers' knowledge of who attendsMeetings held with accounts on the list, pre-booked and on the day
New pipelineLast year's show, read as a cohort, produced opportunities; the sector buys through showsSourced and influenced opportunities over the sales cycle
Attention for a launchTrade press and the sector's buyers attend; the launch date can match the showCoverage, meetings about the new product, enquiries carrying the show's codes
Time with existing customers and partnersCustomers and partners attend and expect to see the business thereMeetings held; renewal and expansion conversations started

A show that cannot show evidence for any row is a show to visit rather than exhibit at. When the real question is whether to meet buyers in person at all, the comparison of webinars and in-person events weighs a stand or hosted event against an online series by the job each must do. Walking the floor, attending talks and booking meetings in the show's public areas costs a fraction of a stand and teaches the team whether exhibiting next year would pay. Where trade writers attending are part of the case for a launch, the guide to running press briefings and media events covers briefing them one to one or in a group around the show.

Before you start

  • The measuring guide read, since its capture rules for in-person events (one CRM campaign per event, a capture method with a note and a rating, codes and tagged links, pre-booked meetings, an agreed upload time) are the measurement plan this tutorial assumes.
  • A target account list, from the account-based marketing guide or the business's ideal customer profile, so that "who will attend" can be checked against the accounts that matter.
  • The sales leader and the sellers who will staff the stand or follow up, available for a planning meeting before any booking beyond the space itself.
  • Whoever owns privacy in the business, to agree what visitors will be told at the stand and what follow-up that allows.
  • Last year's show, if the business went, with its contacts still marked by campaign in the CRM.
  • The campaign calendar, so that pre-show promotion and post-show follow-up do not collide with other launches; the campaign calendar guide explains how to lay them on one timeline.

The steps

  1. Decide whether to go from who will attend

    Start with the people, not the show's reputation. Check the organiser's published visitor profile, by sector and job role, against the target account list; ask the sellers which of their accounts usually attend; and, if the business exhibited before, read last year's show as a cohort: which accounts were met, and what became of them over the following sales cycle. A show where many target accounts and the right roles attend is a candidate. A show where the visitors are mostly students, suppliers and competitors is not, however large it is. Write down the evidence and the accounts you expect to meet, because the next step's case depends on them.

  2. Write the objective and the budget case

    Write one primary objective from the table above, and at most one secondary. Then list every cost: the space, the stand design and build, shipping, travel and accommodation, promotion before the show, and the staff days, which are usually the largest line and the one most often left out. With costs known, use the CPA calculator to work out what each meeting with a target account or each opportunity would cost at the outcomes the team believes are plausible, and compare that with the cost of the same result from other channels. The case is not a forecast; it is a statement of what the show would have to produce to be worth it, which the final step will check.

  3. Agree the follow-up plan with sales before booking anything else

    Before the stand is designed or the travel booked, agree the follow-up with the sales leader. The plan names the CRM campaign, the capture method, the person who will load scans and notes into the CRM and the time by which they will do it, the seller who owns each kind of lead, and how quickly each will be contacted, using the service levels the sales and marketing alignment guide describes for lead response time. It also sets out what each rating leads to. Run the lead routing QA checklist on the show's campaign before the show, with test records for every rating, so that the routing works on the day the contacts are loaded rather than a week later. In the final week, the in-person event readiness checklist confirms this plan, the capture method, what visitors are told and the filming permissions are all in place.

  4. Invite target accounts to book meetings

    Pre-booked meetings are often the most valuable thing a stand produces, because the visitor has chosen to come. Invite contacts at target accounts to book a time at the stand, through sellers' personal invitations and marketing's email to people who agreed to receive it. Send every invitation through a link carrying campaign parameters: Google's URL builder documentation, listed in this page's sources, describes the UTM parameters analytics collects from those links, and the measuring guide explains how pre-booked meetings are then credited to the show's promotion. Brief sellers on who is coming and when, with what the CRM knows about each account, so that every booked meeting starts informed.

  5. Write the stand message and a qualifying question

    A stand is read from a few steps away in a few seconds. Write one message about the buyer's problem, in the words buyers use for it, rather than the company's name and a list of products. Then write one qualifying question every person on the stand asks early in a conversation, such as what the visitor is working on that brought them to the show, so that within a minute the conversation is either worth continuing or politely ended. The B2B content guide covers what different roles in a buying committee need to hear; the stand serves the first conversation, and the follow-up serves the rest.

  6. Staff the stand for conversations and brief every role

    Staff the stand with people who can hold the conversations the objective needs: sellers for target accounts, specialists for technical questions, someone who knows existing customers. Give each role a clear job using a RACI matrix: who greets and qualifies, who takes the pre-booked meetings, who captures and rates each conversation, who is accountable for the upload. Brief everyone before the show on the message, the qualifying question, the accounts expected, the capture method and what visitors may be told about follow-up. A stand where everyone is busy and nobody is capturing produces a good day and an empty CRM. If the stand will also be covered on social, give that its own roles too, as the guide to covering events on social media sets out.

  7. Capture each conversation with a note and a rating

    Use the capture method agreed in the follow-up plan, whether badge scans, a short form on a tablet or cards entered by hand, and add to every contact a note of what was discussed and a rating from the measuring guide's list. A scan without a note is a name, not a lead. A badge scan is personal data about a named person: as the manufacturing guide states from the ICO's direct marketing guidance and the GDPR, both listed in this page's sources, following up needs a lawful basis, and ongoing email marketing has to respect the rules on unsolicited electronic marketing, which differ between individuals and corporate subscribers and between countries. Tell visitors what they will receive after the conversation and record what they were told with the contact. This is educational, not legal advice.

  8. Load the contacts and start follow-up at the agreed time

    Load the scans, notes and ratings into the CRM campaign by the agreed time, with the named person responsible and the result checked against the count from the stand. Routing then sends each contact to its owner, and the response service level starts. Respect what visitors were told: a person who asked for a datasheet receives the datasheet; a person who agreed to hear more can enter marketing; nobody is loaded into the newsletter by default. The list building and consent guide explains that files from events depend entirely on what people were told, and that every marketing message needs a way to opt out. The tutorial on importing contact lists into the CRM walks through the load itself, from mapping the scan file to checking which workflows it will trigger.

  9. Follow each rating through its sequence

    Each rating leads somewhere different. Meetings booked at the show go to the seller who will hold them, with the note attached. Visitors rated hot receive a personal follow-up from a seller, referring to the conversation. Visitors with a real need and no immediate project enter a nurture sequence built for their stage, where they agreed to further marketing, and reach sales when they meet the business's definition of a marketing-qualified lead (MQL). Existing customers and partners go to the people who manage them. Students, suppliers and competitors receive what they asked for and nothing more. Report the share of each rating contacted and the meetings held, which is the measure of follow-up the measuring guide recommends.

  10. Read the show as a cohort and decide on next year

    Follow the show's contacts and accounts over at least one sales cycle. Count the opportunities the show sourced, those whose first touch was the show, separately from those it influenced, already open or later opened at accounts that visited, as the business-to-business measurement guide and the measuring guide define them. Some of those opportunities are marketing-sourced pipeline and some are not, and the report says which rule each figure uses. Put the full cost against meetings with target accounts, opportunities and pipeline, compare with the budget case from the second step, and decide: return, return with a different stand or staffing, visit instead of exhibiting, or drop the show. Record the decision with the cohort figures for whoever plans next year.

A smaller, invitation-only event beside a show is often a better use of the same budget than a larger stand; the guide to hosting roundtables and customer events covers that format.

An industrial conveyor maker's show (illustrative)

Illustrative example — not a real result

Gearwhistle Conveyors reads its show as a cohort

Gearwhistle Conveyors is an invented maker of conveyor systems for food and parcel handling. Its target list holds 220 accounts. The organiser's visitor profile and the sellers' knowledge suggest about 70 of them attend the sector's main show, so the team books a modest stand with one objective, meetings with target accounts, and a secondary one, new pipeline. The full cost, including 24 staff days, comes to £48,000; the CPA calculator shows that 12 sourced opportunities would put the cost per opportunity close to what the business pays through its other channels.

The follow-up plan, agreed with the sales director before the stand is designed, names one person to load every scan and note into the CRM by the evening after each show day, and commits sellers to contact hot leads within two working days. Sellers and marketing invite target accounts through tagged links and book 18 meetings in advance. The stand message is "Fewer jams at peak volume", and the qualifying question asks what is changing on the visitor's line this year. Visitors are told at the stand that they will receive the specification they asked about and, only if they tick the tablet form's separate box, the quarterly engineering newsletter.

RatingContactsFollowed up as agreedSourced opportunities after nine months
Pre-booked meeting held18188
Hot31295
Nurture96961
Customer or partner2222none sourced; 3 expansion conversations
Student, supplier or competitor43not followed upnone

Nine months on, the show has sourced 14 opportunities worth £1.1 million in pipeline, 3 of them won, and influenced 6 opportunities that were already open at accounts that visited. Cost per sourced opportunity is about £3,430. The team decides to return with the same stand size, to invest more of the promotion in pre-booked meetings, which produced most of the pipeline, and to add a small dinner for target accounts on the first evening.

Common mistakes

  • Choosing the show by its size or reputation. Visitor numbers mean nothing unless the target accounts and the right roles are among them.
  • Leaving staff time out of the cost. It is usually the largest line, and without it every show looks cheap.
  • Agreeing follow-up after the show. By then the contacts are in someone's laptop and the visitors have forgotten the conversation.
  • Scans without notes or ratings. A list of names cannot be prioritised, and sellers ignore it.
  • Loading every scan into the newsletter. What visitors were told decides what follow-up is lawful and welcome; a scan is not consent to marketing.
  • No pre-booked meetings. A stand that relies on passing traffic meets whoever passes.
  • Judging the show on badge scans. Scans arrive in days and say little; the cohort over a sales cycle is the result.
  • Counting influenced pipeline as sourced. Report both, and say which rule each figure uses.

Frequently asked questions

Can we email everyone whose badge we scanned at a trade show?

Not automatically. A badge scan is personal data about a named person, so following up needs a lawful basis under the GDPR, and ongoing email marketing has to respect the rules on unsolicited electronic marketing, which the UK Information Commissioner's Office explains in its direct marketing guidance and which differ between individuals and corporate subscribers and between countries. Telling visitors at the stand what they will receive, and recording it, gives the follow-up a cleaner footing than loading every scan into a newsletter. This is educational, not legal advice; whoever owns privacy in the business decides.

How quickly should trade show leads be followed up?

Within a time agreed with sales before the show, written into the follow-up plan, with a named person responsible for loading the contacts into the CRM and a named owner for each kind of lead. The measuring guide for events points out that leads are lost in two places: the gap between the stand and the CRM, and follow-up that arrives after the visitor has forgotten the conversation. The right time is one the sellers can actually meet for the number of conversations the stand is staffed to hold, and it is measured from CRM timestamps afterwards.

How do we know whether a trade show was worth it?

Read it as a cohort: the people and accounts met at the show, followed over at least one sales cycle, with the meetings, opportunities and revenue that came from them recorded separately as sourced and influenced. Put the full cost, including staff time and travel, against the meetings with target accounts, the opportunities and the pipeline, and compare those costs with the business's other events and channels. Badge scans and stand traffic arrive within days and say almost nothing on their own.

Terms used on this page

Tools to try

Frameworks

Where this page is used

Also related

Sources

  1. Direct marketing guidance — Information Commissioner's Office (UK)
  2. Regulation (EU) 2016/679 (GDPR) — EUR-Lex
  3. [GA4] URL builders: Collect campaign data with custom URLs — Google Analytics Help

Related