Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

B2B Marketing › B2B Demand

Marketing Through Channel Partners

How to market through B2B channel partners: resellers, referral and technology partners, partner kits, joint campaigns, lead-sharing rules and partner pipeline.
Guideintermediate11 min readUpdated

What partners add to a B2B route to market

Most business-to-business marketing assumes that the vendor reaches the buyer directly: its content, its advertising, its sellers. For many products that is only part of the route. Small firms buy software on their accountant's recommendation; manufacturers order through distributors; large organisations ask their implementation consultancy which tools to shortlist; buyers choose one product partly because it works with another they already own. In each case another business stands between the vendor and the buyer, and it influences the decision more than the vendor's own marketing can.

Partners add three things. Reach: access to buyers the vendor cannot find or cannot afford to reach directly, often small organisations in large numbers. Trust: a recommendation from an adviser the buyer already relies on carries weight no advertisement does. And capability: partners who implement, support or bundle the product make it usable for buyers who could not adopt it alone. Against that, partners have their own customers, their own priorities and many vendors asking for their attention, and they recommend what makes them look good and is easy to sell.

Partners both create and capture demand. A bookkeeper who mentions a product in a newsletter to clients creates demand among people who were not looking; a reseller answering a client's request for a solution captures demand that already exists. The comparison of lead generation and demand generation explains why the two are judged differently, and the distinction applies inside a partner programme too.

Partner types and what each needs from marketing

Partner programmes go wrong when one set of materials and one reward is applied to partners who do completely different jobs. The types below are general categories; many partners fit more than one.

Partner typeWhat they doWhat they need from marketingHow they are usually credited
Resellers and distributorsSell the product to their customers, often with their own servicesProduct information in their customers' terms, sales materials, training, catalogue content kept accuratePartner-sourced pipeline and orders reported by the partner
Referral partners such as consultants, accountants and agenciesIntroduce clients who need the productA simple way to refer, material written for their clients, proof from shared clients, clear disclosure wordingPartner-sourced pipeline through a tagged link or a referral form
Technology and integration partnersBuild or maintain a product that works with yoursJoint positioning of the combined value, integration pages, co-authored contentPartner-influenced pipeline where the integration mattered; sometimes sourced
Service and implementation partnersDeliver, configure and support the product for clientsTraining and certification, implementation guides, early sight of changes, case studiesInfluenced pipeline, and sourced where they recommend the product

The table also shows why a single partner metric misleads. A technology partner may never originate a deal and still be the reason many are won; a referral partner may originate many small deals and influence none. Measurement, covered at the end of this guide, has to reflect the type. Where the open question is whether a partner belongs in a channel programme at all or in an affiliate programme paid on tracked sign-ups, the comparison of channel partner and affiliate programmes weighs the two routes.

Positioning and a kit partners will use

Partners repeat what is easy to repeat. The kit's job is to make the product easy to explain in the partner's own conversations with its clients, which are rarely the conversations the vendor has with its buyers. A bookkeeper talks to clients about time, deadlines and penalties; an implementation consultancy talks about risk, timelines and how the new tool fits the old ones.

Start from the business's own messaging and adapt it. The messaging house template holds the positioning line, the core message, the pillars and the proof, with variants by segment; a partner variant rewrites the pillars in the partner's clients' terms and adds what the partner gains by recommending it, such as fewer support calls or a service they can bill for. Test the variant with a few partners before producing anything else.

A kit partners will actually use usually contains, as general practice:

  • A short explanation for the partner's clients, in plain language, that the partner can send under their own name.
  • Proof from shared clients, such as a case study with a client the partner served, which the partner can show without awkwardness. The customer references and advocacy guide covers how references are recruited and what each customer agreed to.
  • Co-branded assets where the partner wants them: a page, a slide, an email, with the partner's name and contact details in place.
  • Training on who the product suits, who it does not suit, and how to set it up, so partners recommend it to the right clients.
  • A tagged referral link or form for each partner, so that every introduction is recorded.

The B2B content guide applies here too: partners' clients are often small buying groups with the same need for proof and specificity as any committee. Keep the kit current; an outdated price sheet or a retired feature in a partner's presentation costs credibility with both the partner and the client. Publishers paid by commission rather than business partners need a different starting pack, with tracking links, creative and a first offer, which the tutorial on onboarding and activating new affiliates covers.

Joint campaigns with partners

Beyond the kit, the business can run campaigns with partners: a webinar for a partner's clients, a joint guide, an event for an industry the partner serves, a campaign announcing an integration. The mechanics of planning these as equals, choosing the format, dividing work, cost and approvals in writing and tracking results for each side, are set out in the co-marketing partnerships guide, and they apply to channel partners with little change.

What differs is the balance of effort. In a channel programme the vendor usually does most of the production, because the partner is busy running its own business; the partner contributes its audience, its name and its expertise. A RACI matrix for each campaign, with one accountable owner per task on each side, prevents the common stall where the partner assumed the vendor would send the invitation and the vendor assumed the partner would. Each campaign gets its own tagged links per partner, so results can be read by partner. Before a joint campaign goes live, the co-marketing launch checklist confirms the agreement, approvals on both sides, the consent each partner relies on and the end date.

Leads, deal conflict and customer data

Most partner programmes that sour do so over leads, not money. A partner introduces a client, the client also fills in the vendor's form, a direct seller calls them first, and the partner concludes that referring is a way to give away clients. The fix is a set of written rules, agreed with sales and partners before the programme starts and applied the same way every time.

  • Lead ownership. Who owns a lead that arrives from a partner, from the vendor's own marketing, or from both: for example, the side that registered it first in the CRM within a set period, or the partner for any account it introduced. The sales and marketing alignment guide argues for writing the sourcing rule into the service-level agreement; partner deals need the same.
  • Deal conflict. What happens when a direct seller and a partner are both working the same account: who leads, how the partner is credited, who decides disputes and how quickly.
  • Routing. Lead routing rules that send a partner-registered lead to the partner, or to the partner manager, rather than to the next direct seller in rotation.
  • One record per organisation. Deduplication of accounts and contacts, so the same client is not created twice, once from the partner's form and once from the website.

All of this lives in the CRM: a partner field on leads, accounts and opportunities, a registration date, and the source fields that the CRM fundamentals guide describes, with required fields enforced and one person owning the data model. The tutorial on setting up partner lead registration turns these rules into a working procedure, from what a registration holds to approval, expiry and disputes.

Customer data needs its own rule. As general practice, each side markets to its own audience under its own consent records, and contacts are not handed from one business to another. The co-marketing guide states, from the GDPR and the UK Information Commissioner's Office's direct marketing guidance, both listed in this page's sources, that sharing contacts between businesses is possible only where the people concerned agreed to it. A referral respects that by design: the partner introduces a client who wants the introduction. Where a joint form collects details for both businesses, make clear who receives them and offer each side's marketing as a separate choice. This is educational, not legal advice; take advice before any exchange of personal data.

Disclosure when partners recommend for a fee

A referral partner who recommends a product to its clients, or publicly in a newsletter, article or social post, and receives a fee or other benefit for doing so has a material connection with the vendor. The FTC's endorsement guidance, listed in this page's sources, expects such a connection to be disclosed clearly, as the referral programme guide and the influencer contracts and disclosure guide state; the influencer guide also sets out how UK regulators approach the same question.

In practice that means giving partners plain disclosure wording to use when they recommend the product publicly for a reward, writing the expectation into the partner agreement, and never asking a partner to present a paid recommendation as independent advice. This is educational, not legal advice.

Measuring partner-sourced and partner-influenced pipeline

Partner pipeline only gets the attention it deserves when it appears in the same reports as direct pipeline, with its own sources. Report partner-sourced pipeline, which a partner originated, separately from partner-influenced pipeline, where a partner played a part in an opportunity the business originated or was already working. Neither should be counted as direct marketing-sourced pipeline, and neither should disappear into it.

Four practices make the figures trustworthy. Give every partner a tagged link for each campaign and its standing referral link, with UTM values following the business's naming conventions, so introductions through the website are recorded. Put a required partner field on every opportunity, filled when the opportunity is created rather than at close. Read the results by cohort of first touch, as the business-to-business measurement guide recommends, because partner deals often move at a different pace from direct ones. And where orders pass through resellers or distributors, agree in advance what sell-through and lead outcome reports they will provide and match them to cohorts, as the manufacturing industry guide describes for distributors.

Then judge the programme on its economics. Customer acquisition cost (CAC) for partner-sourced customers includes the partner manager's time, the kit, training, joint campaigns and whatever partners are paid, read over a full cycle rather than a quarter; the affiliate economics guide covers how payments to partners are designed. Compare the result with direct acquisition for the same segment, and look at retention as well: customers introduced by a trusted adviser can stay longer than direct ones, or leave when the adviser does.

A payroll software firm's partner programme (illustrative)

Illustrative example — not a real result

Coalquill Payroll reports partner pipeline as its own source

Coalquill Payroll is an invented company selling payroll software to small employers. It reaches them through two kinds of partner: 38 bookkeeping firms that refer their clients, and one reseller that bundles the software with its accounting services. Bookkeepers receive a one-off referral fee for each client who stays past the first quarter; the reseller's terms are set in its own contract.

Marketing rewrites the messaging house for bookkeepers' clients, around fewer payroll errors and no missed filing deadlines, and builds a kit: a one-page explanation each bookkeeper can send under their own name, a case study with a café group that one of the bookkeepers serves, a co-branded client webinar and a tagged referral link per firm. Bookkeepers who mention Coalquill in their newsletters receive a line of disclosure wording saying that they receive a fee for referrals.

Sales and the partner manager agree a lead-ownership rule: a lead registered by a partner in the CRM belongs to that partner for 90 days, whichever route the client later takes. In the first two quarters 11 leads arrive both through a partner link and through the website form; deduplication catches all of them and the rule gives each to the partner without dispute.

First two quartersOpportunitiesWonRecorded as
Bookkeeper referrals7441Partner-sourced
Reseller deals, from the reseller's monthly report5238Partner-sourced
Direct deals where the client's bookkeeper took part2917Partner-influenced
Direct deals with no partner involvement21086Direct

Reported this way, partners source about a third of new opportunities and influence a further share that direct reports had been crediting entirely to the sales team. Acquisition cost for bookkeeper-referred customers, including fees, the partner manager's time and the kit, comes to £310 against £420 for direct customers, and the team agrees to recruit more bookkeeping firms in the regions where referred customers have stayed longest.

Common mistakes

  • One programme for every partner type. Resellers, referrers, technology partners and implementers do different jobs and need different materials and credit.
  • A logo and a price list as the kit. Partners repeat what is easy to explain to their clients; write it in their clients' terms.
  • No written lead-ownership rule. Disputes settled case by case teach partners that referring gives clients away.
  • Swapping contact lists. Each side markets to its own consented audience; contacts move only where people agreed.
  • Leaving disclosure to partners. Give paid recommenders plain wording and put the expectation in the agreement.
  • Counting partner deals as direct, or influence as sourcing. Keep a partner field on every opportunity and report sourced and influenced separately.
  • Judging partners on the quarter. Read partner-sourced customers by cohort, with their full cost, over a cycle.

Frequently asked questions

What is the difference between partner-sourced and partner-influenced pipeline?

Partner-sourced pipeline is opportunities that a partner originated: a referral, a reseller's deal, an introduction the business would not otherwise have had. Partner-influenced pipeline is opportunities the business originated, or that were already open, where a partner played a part, such as an integration that helped win the deal or an implementer who reassured the buyer. Reporting them separately, with a partner field on every opportunity, stops the programme either taking credit for deals it only touched or vanishing from reports because a seller logged the deal as direct.

Who owns a lead that arrives both from a partner and from our own marketing?

Whoever the written rule says, agreed with sales and partners before the programme starts. Common rules give the lead to whichever side registered it first in the CRM within a set period, or give a partner credit for any account it introduced however the lead later arrived. The rule matters less than having one, recording it, applying it the same way every time and deduplicating records so the same organisation is not worked twice. Disputes settled case by case teach partners that registering deals is pointless.

Can partners share their client lists with us, or can we share our leads with partners?

As general practice, each side markets to its own audience under its own consent records, and contacts move between businesses only where the people concerned agreed to it. The co-marketing guide explains this from the GDPR and the UK Information Commissioner's Office's direct marketing guidance. A referral works because the partner introduces a client who wants the introduction, not because a list changes hands. This is educational, not legal advice; take advice before any exchange of personal data.

Terms used on this page

Frameworks

Where this page is used

Also related

Sources

  1. Regulation (EU) 2016/679 (GDPR) — EUR-Lex
  2. Direct marketing guidance — Information Commissioner's Office (UK)
  3. FTC Endorsement Guides: What People Are Asking — Federal Trade Commission

Related