Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Affiliate Marketing › Programme Management

Onboarding and Activating New Affiliates

How to onboard new affiliates so they start promoting: the welcome pack, links and creative, a first offer, calls with key partners, chasing silent ones.
Tutorialbeginner9 min readUpdated

Why approved partners never start

The partner recruitment, compliance and fraud guide covers finding and approving partners against a written profile. It also says, in one paragraph, what a new partner needs and that many intend to promote and simply have not started. This tutorial takes that paragraph and turns it into a routine.

Partners stall for ordinary reasons. The pack is scattered across emails and a portal they never log into. The links work but nobody explained how to point one at a specific product. The creative is the wrong size for their site. There is no offer, so nothing makes this month better than next month. The partner has a question about the terms and no one to ask. None of these is a sign that the partner is a bad fit; each is a gap in onboarding.

The AARRR framework is useful here because it separates acquisition from activation. Recruiting fills the top of the funnel; activation is the moment a partner does the first thing that matters, which for an affiliate is placing a live link that sends a customer. Measure that moment separately, or a programme full of approved names will look healthier than it is.

When a programme has been open for months with many approved partners and little revenue, the diagnosis of affiliates not generating sales counts partners at each stage and separates activation from recruitment, rate, account management, promotion timing and tracking.

Before you start

  • The programme terms in a plain-language version. Approval sends partners to them. The programme management hub places the terms among the rules that hold the programme together; the pack needs a version a partner will read. The tutorial on writing affiliate programme terms covers the full document.
  • Approved creative and product information. Logos, product images, banners, brand guidelines and the claims partners may repeat, taken from the asset library rather than from campaign folders.
  • Working tracking. A test click-to-sale journey passed on the platform, as the affiliate programme launch checklist asks before launch.
  • An analytics convention. A fixed source, medium and campaign scheme for partner links.
  • A named contact. One person, with an address partners can reach, who answers within the time the welcome message promises.
  • A record of where each partner is. Approved, welcomed, link placed, first sale, dormant, with dates. A column in the platform or a simple sheet will do.

The steps

  1. Build the onboarding pack once

    Put everything a partner needs in one place that you update, not in each email. The tutorial on setting up a marketing asset library explains how to keep one approved copy of each asset with its rights and expiry; the pack should point to those approved copies, so a partner never uses an image the brand is no longer licensed to show. Add product information or a product feed for partners who build comparison or listing pages, the brand guidelines, the current offer, the plain-language terms and the contact. Write it for the partner types you recruit: a content site needs product stories and claims it may repeat, a comparison site needs a clean feed, a newsletter needs short copy that fits an email.

  2. Send a welcome message on approval

    Approval should trigger a welcome message the same day, from the named contact rather than a no-reply address. Keep it short: why the partner was approved, the link to the pack, how to get their first link, the current offer, the one thing the terms most need them to know, and when you will be in touch next. Partners who were recruited by outreach should hear from the person who recruited them. A welcome that arrives weeks after approval tells the partner how much attention the programme pays.

  3. Set up links, deep links and analytics parameters

    Show each partner how to create a tracking link and how to point one at a specific page, a deep link in affiliate terms. The glossary's deep link entry describes the app version of the same idea: a link that opens a specific place rather than the front door. The tracking guide explains what the platform's links must carry. For your own analytics, agree one UTM scheme and build it into the links rather than asking partners to type it. The guide to naming conventions and UTMs suggests a short, controlled list of medium values with affiliate as one of them, a source that identifies the partner, and lower case throughout; Google's help page on URL builders describes adding these parameters to collect campaign data.

  4. Give a first offer and a reason to promote now

    A partner with a full content calendar needs a reason to fit the brand in this month. Give them one: a launch offer for new partners, a product they can review, a seasonal angle, or a bonus for a first sale within a stated period if the commission structure allows it. Keep the offer inside the terms and make sure the platform applies it to the right dates. Larger promotions run through the partner base belong to the programme's promotion planning, not to onboarding; here the goal is the first link. The tutorial on running promotions through affiliates covers those.

  5. Call the partners who matter most

    Pick the few new partners whose audience or reach matters most and book a call. Ask how they plan to feature the brand, what their audience asks about, what format works on their site and what would make the brand easy to recommend. Agree a first placement and a date. A short written creative brief after the call, with the message, the audience, the offer and the disclosure requirement, saves both sides a round of corrections. Partners who become important later move into the programme's account management routine. The guide to managing key affiliate partners covers that routine.

  6. Include disclosure in the pack, briefly

    The pack carries one line on disclosure: partners must make the commercial relationship clear to their audience, in line with the rules in their markets, as the recruitment guide's disclosure section and the terms set out. Link the terms and give example wording for each format. Checking what partners publish is part of the programme's compliance routine, which the recruitment guide covers; the tutorial on checking affiliate content for disclosure and claims runs that check; onboarding only makes sure no partner can say they were not told.

  7. Check the first link and the first sale

    When a partner says they have published, look at the page. Is the link live, does it reach the right page, does it carry the partner's identifier, is the creative current and is the disclosure there? When the first conversion arrives, check that it recorded against the right partner and that the partner can see it. Tell the partner you saw it. A first sale that never shows in their report is the fastest way to lose a new partner.

  8. Follow up with silent partners on a schedule

    Partners who have not placed a link by the date in your schedule get a follow-up, and each follow-up brings something new: a fresh offer, a product that suits their audience, a piece of content they can use, or a direct question about what is stopping them. Do not send the welcome message again. Note each contact in the partner record, so that the next person to look knows what has been tried.

  9. Decide when to stop chasing and mark partners dormant

    After the planned follow-ups, mark the partner dormant and stop spending time on them. Keep them in the programme if the terms allow, so that a seasonal offer can reach them later. Review the dormant list against the recruitment profile: if many dormant partners share a type, a source or a reason, the problem is in recruiting or in the pack, not in the partners. When an asset is withdrawn, the tutorial on withdrawing an asset from every channel covers asking partners to remove their copies, which includes dormant partners who once used it.

What goes in the onboarding pack

The recruitment guide lists what a new partner needs. The table turns that list into a pack and says where each item should come from, so that the pack stays current without being rebuilt.

ItemWhat it containsSource of truthKept current by
Welcome noteWhy the partner was approved, how to start, next contact dateProgramme managerReviewed each quarter
Tracking linksHow to create links and deep links; the partner's identifierAffiliate platformPlatform settings
Analytics parametersSource, medium and campaign values built into linksNaming conventionAnalytics owner
Product informationFeed or key products, prices, availability, claims partners may repeatProduct data and approved claimsFeed updates; claims review
CreativeLogos, images, banners in common sizes, with expiryAsset libraryLibrary owner
Brand guidelinesName use, tone, what not to sayBrand teamBrand team
Current offerWhat, for whom, which dates, how to use any codePromotions calendarProgramme manager
Terms summaryPlain-language version with a link to the full termsProgramme termsWhoever owns the terms
Disclosure lineThe requirement and example wording per formatTerms and compliance routineProgramme manager
ContactOne named person and how to reach themProgramme managerProgramme manager

Business partners such as resellers, consultants and integrators need a different kit, with positioning in their own words and rules on leads; the guide to marketing through channel partners covers it.

A running retailer's first partner cohort (illustrative)

Illustrative example — not a real result

Kervatch Running onboards its first cohort

Kervatch Running, an invented running shoe retailer, approves its first cohort of 24 partners: 15 running blogs and 9 running club newsletters. Its earlier test approvals had shown that partners left alone placed few links, so it builds the onboarding pack before sending a single welcome.

The pack holds tracking links and deep-linking instructions, links already carrying the source, affiliate as the medium and a campaign name, a feed of its 140 shoes, approved images from its asset library and a shoe-fitting guide partners may quote. Each partner gets a welcome message the day they are approved, with a launch offer for the first month: a free gait check voucher for readers who buy through a partner link.

The programme manager calls the 6 partners with the largest audiences and agrees a first placement with each. By the end of the third week, 14 partners have placed a link and 9 have recorded a first sale, each checked and acknowledged. Kervatch follows up twice with the 10 silent partners, first with a shoe they could review and then with a direct question. Four start. The remaining 6 are marked dormant and kept in the programme for the autumn race season offer.

Common mistakes

  • Approving and walking away. A login is not onboarding. Partners need the pack, a reason to start and a person to ask.
  • Rebuilding the pack in every email. Keep one pack that points to approved sources, and update it in one place.
  • Creative from campaign folders. Partners keep what you send. Point to the asset library so expiry and rights travel with the file.
  • Asking partners to type UTM parameters. Hand-typed values fragment the channel report. Build the convention into the links.
  • No first offer. Without a reason to promote this month, a busy partner promotes next month, or never.
  • The same follow-up twice. Each contact should bring something new, or it is noise.
  • Chasing forever. Set the schedule in advance, mark partners dormant when it runs out, and spend the time on partners who are active.
  • Blaming partners for a pattern. If many approved partners of one type never start, look at the recruitment profile and the pack before looking at the partners.

Frequently asked questions

What should a new affiliate receive on the day they are approved?

Everything they need to place a first link without asking a question: their tracking links and how to deep-link to any page, a product feed or the key product information, approved creative and brand guidelines, the current offer, the terms in plain language with the disclosure requirement, and the name of a person to contact. The recruitment guide lists the same items. Send them in one welcome message with one link to the pack, rather than in a series of emails the partner has to piece together.

How long should we keep chasing an affiliate who has not started?

Set the schedule before the first partner joins, and base it on how long your own partners have taken to place a first link in the past, not on a figure from elsewhere. A planned follow-up or two, each with something new to offer, is reasonable; after that, mark the partner dormant, keep them in the programme if the terms allow, and spend the time on partners who are active. A dormant partner can be woken later by a seasonal offer or a new product.

Should partners add our UTM parameters to their links?

Only if the convention is fixed and the links are built for them. The platform's tracking identifiers pay the partner; analytics parameters tell your own analytics where the visit came from, and the tracking guide notes that the two do different jobs. Agree one source, medium and campaign scheme, with affiliate as a controlled medium value as the naming conventions guide suggests, build it into the links the platform issues where it can, and do not ask partners to type parameters by hand.

Terms used on this page

Frameworks

Where this page is used

Sources

  1. [GA4] URL builders: Collect campaign data with custom URLs — Google Analytics Help

Related