Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Google Ads & PPC › Troubleshooting

Google Ads Not Showing

Why Google Ads are not showing and how to fix it: a diagnosis table for status, policy, budget, Ad Rank, keywords, negatives and targeting, with checks.
Troubleshootingintermediate7 min readUpdated

First, confirm the ads really are not showing

Two different complaints hide behind this symptom, and they lead to different places. "I searched and could not find my ad" is a test, and a poor one: searching for your own ad again and again without clicking can stop Google showing it to you, and your own location, language and device may not match the campaign's targeting. "The campaign has no impressions" is a measurement, and it is the one to trust.

Start with the account, not a search box. Set the date range to the full days since the problem began, remove any filters, and read the status column at campaign, ad group, ad and keyword level. Then run the query through the Ad Preview and Diagnosis tool with the right location and device: it reports whether the ad would show and, if not, the reason, without registering an impression. If impressions are low rather than zero, add the Impression Share columns, which split lost share into budget and rank and point straight at the right row of the table below.

Diagnosis table

Diagnosis

SymptomCheckLikely causeFix
No impressions anywhere in the campaignStatus column at every level; billing summary; campaign start and end datesSomething paused, removed, ended, not yet started, or the account has a payment problemRe-enable the right level, correct the dates, resolve billing
One ad or ad group has no impressions while others runAd status and policy detailsAd disapproved, limited by policy, or still under reviewEdit the ad or landing page to meet the policy, or appeal if it was misjudged
Impressions stop part-way through the dayCampaign status "limited by budget"; lost impression share (budget)Daily budget spent earlyRaise the budget, narrow what it funds, or let a lower-priority campaign take less
Few impressions; high lost impression share (rank)Lost impression share (rank); keyword Quality Score; bid strategy targetAd Rank too low: bid, ad quality or a target too strict to win auctionsImprove relevance and landing page, raise bids, or loosen the target
A keyword shows "low search volume" or no impressionsKeyword status; keyword planner volume; match typeKeyword too rare or too narrowly matchedBroaden the match type or replace the keyword with the phrasing people use
Some expected searches never trigger the adSearch terms report; negative keyword lists for a conflictA negative keyword blocks the queryRemove or narrow the conflicting negative, then recheck the lists
Ads show for colleagues but not customers in a regionLocation, language, schedule, device adjustment and audience settingsTargeting excludes the searcherCorrect the setting that excludes them, at the level where it is set

Fix, verify and prevent each cause

Paused, ended or unbilled

A campaign, ad group, ad or keyword can each be paused independently, and a campaign can sit past its end date or before its start date. Account-level problems, such as a declined payment or an unfinished billing setup, stop every campaign at once.

Fix: re-enable the paused level or correct the dates, and resolve billing first if the account shows a payment notice.

Verify: the status column reads eligible at every level, and impressions appear in the next full day.

Prevent: give every campaign a named owner, use labels for anything paused on purpose, and keep a valid backup payment method. The management routine in the account hub covers who checks what each week.

Not approved

An ad may be disapproved, limited by policy (shown only in some places or to some people), or still under review after an edit. A landing page that is broken, slow to load or blocked for Google's crawler can also stop an ad.

Fix: open the policy details, change the text, asset or destination that breaks the policy, and appeal only when you believe the decision is wrong.

Verify: the ad's status changes to eligible and it records impressions.

Prevent: keep an approved fallback ad in every ad group so one disapproval never empties it, and read the policy summary on the Google Ads hub before launching in a restricted category. The guide to ad policies and disapprovals covers the policy groups, each review status and destination problems in full.

Budget spent early

Google can spend more than the average daily budget on some days and less on others, but once the budget is exhausted the ads stop until the next day.

Fix: raise the budget where returns justify it, or reduce what it has to fund by pausing weak keywords or splitting a high-value segment into its own campaign.

Verify: lost impression share due to budget falls and the ads run through the day.

Prevent: size budgets from targets rather than habit and review pacing weekly, as set out in budgets and pacing.

Ad Rank too low

Ad Rank combines the bid, the quality of the ad and landing page, and the expected effect of assets. If it falls below what an auction needs, the ad simply does not appear. With an automated strategy, a target set too tightly does the same thing by bidding too little.

Fix: improve the components of Quality Score (relevance, expected click-through, landing page), raise bids, or loosen the target in small steps.

Verify: lost impression share due to rank falls over the following week.

Prevent: set targets from economics and change them gradually, using the Quality Score guide and the Smart Bidding guide.

Too little search volume

A keyword that very few people search, or an exact-match keyword that is narrower than how people phrase the need, may never enter enough auctions to show. Google flags some of these keywords with a low search volume status.

Fix: broaden the match type or replace the keyword with the phrasing customers actually use, found in the search terms of related keywords.

Verify: the keyword's status clears and it records impressions.

Prevent: research volume before building ad groups and review match-type choices with the match types guide.

Blocked by a negative keyword

A negative keyword added to stop irrelevant traffic can block the queries a campaign was built for, especially a broad negative in a shared list applied to many campaigns.

Fix: remove the conflicting negative or tighten its match type.

Verify: the query now triggers the ad in the Ad Preview and Diagnosis tool and appears in the search terms report.

Prevent: review new negatives against active keywords before applying a shared list, following the conflict checks in negative keywords.

Targeting excludes the searcher

Location targeting can be set to people in a place or to people interested in it; a language setting, an ad schedule, a device adjustment that removes a device, or an audience used for targeting rather than observation can all narrow who sees the ad.

Fix: correct the one setting that excludes the people you expected to reach, at the level where it is set.

Verify: Ad Preview and Diagnosis shows the ad for that location, language and device.

Prevent: document targeting decisions in the campaign brief and keep settings at the level described in account structure.

A prevention routine for launches and edits

Most of these causes are introduced on a specific day: a launch, a budget change, a new negative list, a policy edit to an ad. A short routine after every material change catches them before a day of traffic is lost. Read the status column at every level the next morning. Check impressions by hour for the first full day. Read lost impression share split into budget and rank weekly. Run one core query per campaign through Ad Preview and Diagnosis after any change to negatives or targeting. Keep change history open when an alert fires, because the cause is usually the most recent edit. Diagnosis is fastest when only one thing has changed at a time.

Illustrative example — not a real result

A local service campaign that stopped appearing

A plumbing company launches a search campaign for its city. On day three the owner searches for "emergency plumber" from home and cannot find the ad. The account shows 40 impressions on day one, 35 on day two and none after 11:00 on day three. The status column says "limited by budget", and lost impression share due to budget reads 62% while rank loss is 9%. Nothing is blocked: the ads are winning and then running out of money before lunch. Raising the daily budget from 20 to 35 and moving two low-intent keywords into a paused ad group restores all-day delivery, which the hourly report confirms the next day.

Common mistakes

Diagnosing from a personal search rather than from the account's own columns. Changing the budget, bids and keywords at once, so nobody knows which change worked. Removing a whole negative list instead of the one conflicting term. Treating "eligible" as proof that the ad is winning auctions. Assuming the problem is the campaign when the account's billing has failed and every campaign stopped together.

Frequently asked questions

Why can I not see my own ad when I search for it?

Searching for your own ad repeatedly without clicking can make Google stop showing it to you, and your location, language, device and search history may not match the campaign's targeting. Use the Ad Preview and Diagnosis tool instead; it shows whether the ad would appear for a chosen query and location without adding impressions or affecting the auction.

The campaign status says eligible, so why are there no impressions?

Eligible means nothing in the settings blocks the campaign; it does not mean the ad wins auctions. A low bid or Quality Score, a keyword with very little search volume, or targeting that excludes most searchers can all leave an eligible campaign with no impressions. Work through the Ad Rank, keyword and targeting rows of the diagnosis table.

How long should I wait after a fix before judging it?

Policy reviews and billing changes usually resolve within a day or so; check the status column rather than the results. For bid, keyword and targeting fixes, judge impressions over several full days, because traffic varies by weekday and a single morning says little. If an automated bid strategy is involved, avoid stacking further edits while it adjusts.

Terms used on this page

Where this page is used

Also related

Sources

  1. How Google Ads works — Google Ads Help
  2. About average daily budgets — Google Ads Help
  3. About Quality Score — Google Ads Help
  4. About keyword matching options — Google Ads Help
  5. About negative keywords — Google Ads Help

Related