How statuses are layered from account to keyword
The account management hub describes the account as a hierarchy: account, campaign, ad group, and the ads and targeting inside each ad group. Statuses follow the same layers, and a status at a higher level governs everything beneath it. A campaign, ad group, ad or keyword can each be paused independently, as the ads not showing diagnosis notes, and an account-level problem such as a payment notice stops every campaign at once. So a sweep reads from the top: an eligible keyword in a paused campaign serves nothing.
Beside the hierarchy sit three things with statuses of their own. Bid strategies report whether they are learning, limited or working normally. Conversion actions report whether their tag is detected and recording. And products in Merchant Center report whether they are approved, limited or disapproved, which decides what Shopping and Performance Max campaigns can show.
One rule applies everywhere. Status wording varies by campaign type and changes over time, as the Smart Bidding strategies guide says of the limited sub-statuses, so the hover text beside each status in the account is the reference. The tables below group statuses by what they ask of you; when the account's words differ, follow the account and use the tables to decide which page to open.
| Kind of status | Examples | What it asks |
|---|---|---|
| Normal operation | Eligible, approved, recording conversions | Nothing beyond the usual review cadence |
| Constraint to decide on | Limited by budget, limited by policy, learning | A decision: accept it, wait, or loosen the constraint |
| Fault | Disapproved, misconfigured, tag inactive, no recent conversions | A fix, at the page that owns it, before results can be trusted |
Campaign statuses
| Status | What it means | Needs action? | Where it is fixed |
|---|---|---|---|
| Eligible | Nothing in the settings blocks the campaign | No; it does not mean the ads win auctions | Ads not showing diagnosis if impressions are low anyway |
| Paused | Someone paused the campaign | Only if the pause was not meant | Re-enable; label deliberate pauses so they are not mistaken for faults |
| Ended | The campaign's end date has passed | Only if it should still run | Correct the end date |
| Limited by budget | The budget is below what the campaign could have spent at its current bids and targets | A decision, not necessarily a fix | Budgets and pacing guide |
"Limited by budget" deserves the most care. The budgets and pacing guide describes it as descriptive rather than a fault: the campaign still runs, it simply stops earlier or serves less often, and the share of impressions lost to budget shows how much more there was to buy. Read it beside Impression ShareShare of eligible impressions you received. lost to budget and the campaign's cost per result before deciding whether to raise the budget, tighten the target, narrow the campaign or accept the ceiling.
Ad and asset statuses
| Status | What it means | Needs action? | Where it is fixed |
|---|---|---|---|
| Under review | New or edited, not yet reviewed | No; avoid repeated edits | Wait, then read the result |
| Approved or eligible | Meets the policies and can serve | No | None |
| Limited by policy | Can serve, but only in some places or to some people | Read the detail; act only if the limit is not expected | Ad policies and disapprovals guide |
| Disapproved | Breaks a policy and cannot serve | Yes | Ad policies and disapprovals guide |
A disapproval is fixed by reading the reason, correcting the ad, the asset or the landing page, then resubmitting, or appealing if the decision was wrong; the policy guide sets that out, including why so many disapprovals start on the destination.
Ad strength sits on the same screen but is not a serving status. The responsive search ads guide describes it as a rating from Incomplete through Poor, Average and Good to Excellent, calculated from the assets themselves, and Google states it is not a factor in the auction. A Poor rating on an approved ad does not stop it serving; whether it matters for that ad is the question the ad strength diagnosis answers from the ad's results.
Keyword statuses
| Status | What it means | Needs action? | Where it is fixed |
|---|---|---|---|
| Eligible | Nothing blocks the keyword | No | None |
| Low search volume | Too few searches for the keyword to enter many auctions | Usually | The keyword row of the ads not showing diagnosis: broaden the match type or use the phrasing people search with |
| Rarely shown | The keyword seldom serves; the hover text gives the reason | Read the reason first | The Ad Rank and keyword rows of the ads not showing diagnosis |
| Below first-page bid | Under manual bidding, the maximum bid is below the account's estimate for showing on the first page | Only if the keyword matters | Raise the bid where the economics allow, or let the keyword sit lower |
| Paused | Someone paused the keyword | Only if the pause was not meant | Re-enable |
The account audit flags these statuses as part of its keyword step, and adds one the status column may not show directly: a keyword blocked by a conflicting negative. Low statuses on a keyword often travel with weak components of Quality ScoreGoogle's 1–10 keyword diagnostic., which the Quality Score guide treats as a diagnostic pointer to relevance and landing page problems rather than a target.
Bid strategy statuses
The bid strategy status column is the main feedback Smart BiddingGoogle Ads' automated bid strategies that set each auction's bid from conversion signals. gives. The table follows the Smart Bidding strategies guide, which owns the detail.
| Status | What it means | Needs action? | Where it is fixed |
|---|---|---|---|
| Learning | Created or significantly changed and still adjusting | No; wait and avoid further changes | Smart Bidding strategies guide |
| Limited (by budget) | Could spend more at the target but the budget caps it | A decision | Budgets and pacing guide |
| Limited (bid limits) | Minimum or maximum bid limits in a portfolio are constraining bids | Usually | Smart Bidding strategies guide, on portfolio bid limits |
| Limited (low conversion data, or similar wording) | Too few conversions for the strategy to learn reliably | Yes | Smart Bidding strategies guide: broaden the action, pool campaigns or run without a target longer |
| Misconfigured | A setting conflicts with the strategy, such as a missing conversion action | Yes | Fix the named setting |
| Inactive | No campaigns or ad groups use the strategy | Tidy up | Assign it or remove it |
| Eligible | Normal operation | No | None |
The Smart Bidding guide's general rule is the one to remember: learning asks for patience, limited names a specific constraint to loosen or accept, and misconfigured names a specific setting to repair. If results fell after a strategy change and the status alone does not explain it, the diagnosis of results that dropped after a bid strategy change separates learning from a target that is too tight or data that is too thin.
Conversion action statuses
Google describes conversion tracking as the way to see what happens after someone interacts with an ad. Each conversion action reports whether that is working.
| Status | What it means | Needs action? | Where it is fixed |
|---|---|---|---|
| Unverified | The tag has not yet been detected firing with what the action needs | Yes, if it persists after a real conversion | Conversion tracking setup tutorial |
| Recording conversions | The tag is detected and conversions are arriving | No | None |
| Tag inactive | The tag worked before and has not been detected recently | Yes | Conversions not tracking diagnosis |
| No recent conversions | The action has recorded nothing lately | Check against the business's own records | Conversions not tracking diagnosis |
The setup tutorial's troubleshooting table gives the commonest reasons for the two fault states: a status that stays unverified usually means the tag never fires on the live site, and a tag that turns inactive after working usually follows a site redesign that removed the container or changed the thank-you address. "No recent conversions" needs a check before a fix: if the shop system or CRM also shows no orders or leads, the status is describing the business, not a fault. A conversion fault outranks every other finding in a sweep, because bidding and reporting both depend on the count.
Product statuses in Merchant Center
Products have their own statuses, reported in Merchant Center rather than Google Ads. The product feeds guide describes problems at three levels: account issues, which are handled first; feed issues, such as fetch failures, which stop updates; and item issues, which disapprove or limit individual products and are the daily work. A disapproved product cannot enter any auction at any bid; a limited one, for example for missing identifiers, serves in fewer places.
| Status | What it means | Needs action? | Where it is fixed |
|---|---|---|---|
| Approved | The product can serve | No | None |
| Limited | The product serves in fewer places, for example because identifiers are missing | Prioritise by sales value | Product feeds guide |
| Disapproved | The product cannot serve, for example because price or availability does not match the page | Yes, best-sellers first | Product feeds guide; fix at the source where possible |
The feed guide treats the Diagnostics page as a backlog ordered by revenue at risk: a disapproved best-seller matters more than a hundred disapproved long-tail items. The Product FeedA structured file of a store's products, prices and availability used to build shopping and catalogue ads. entry explains why the feed carries so much of a product campaign.
A weekly status sweep (illustrative)
The sweep reads the levels in the order of this guide, sorts each status into normal, constraint or fault, and sends each fault to its page. It sits naturally in the weekly line of the management routine in the account hub, and the Google Ads account audit checklist covers the same ground more slowly when the account is audited.
Spoolmarten Sewing's Monday status sweep
Spoolmarten Sewing, an invented sewing-machine retailer, runs four search campaigns, a Performance Max campaign on its feed of 640 products and three conversion actions. Its marketing manager spends twenty minutes each Monday on a status sweep. This Monday's sheet:
| Level | Status found | What it meant | Action needed? | Page used |
|---|---|---|---|---|
| Campaign | Search: machines limited by budget | 18% of impressions lost to budget; cost per sale £31 against a £45 limit | Yes: budget raised from £80 to £95 a day | Budgets and pacing guide |
| Campaign | Search: haberdashery paused | Paused deliberately for a stock shortage, labelled | No | None |
| Ad | 2 ads disapproved in the overlockers ad group | Final URL pointed at a page removed in a site update | Yes: URL corrected, ads resubmitted | Ad policies and disapprovals guide |
| Asset | Overlockers ad rated Poor for ad strength | Approved and converting well; headlines pinned for a warranty message | No | Ad strength diagnosis |
| Keyword | 6 keywords at low search volume | Long model numbers few people search | Yes: replaced with the model family names people use | Ads not showing diagnosis |
| Bid strategy | Performance Max: learning | Target return changed from 400% to 450% on Friday | No: left alone until it settles | Smart Bidding strategies guide |
| Conversion action | Newsletter sign-up: tag inactive | The thank-you page address changed in the site update | Yes: trigger corrected and republished | Conversions not tracking diagnosis |
| Products | 23 products disapproved | Price mismatch after a weekend sale ended on the site before the feed updated | Yes: feed fetch rerun; 4 best-sellers checked by hand | Product feeds guide |
Three of the eight findings were faults caused by the same site update, which the manager adds to the release checklist. The sweep closes with a line in the decision log listing each action and the date to check it.
Common mistakes
- Reading one level only. An eligible keyword in a paused campaign, or an approved ad behind a disapproved product feed, serves nothing.
- Treating eligible as winning. Eligible means nothing blocks the campaign, not that its ads win auctions.
- Clearing limited by budget without checking the economics. The status describes a ceiling; raising the budget is only right if the next conversions are worth their cost.
- Interfering during learning. A strategy in its learning period needs time, not another edit.
- Chasing ad strength as if it were a serving status. It rates the asset pool; an approved ad with a Poor rating still serves.
- Ignoring conversion statuses. A tag that turned inactive quietly corrupts bidding and reporting at once; it belongs at the top of the sweep's findings.
- Relying on a list of exact wordings. Statuses vary by campaign type and change over time; the hover text in the account is the reference.
- Diagnosing inside the sweep. The sweep sorts and routes; the troubleshooting pages diagnose.
