Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Google Ads & PPC › Account Structure & Management

Moving to a New Google Ads Account

How to move to a new Google Ads account when the old one cannot be recovered: copy what it holds, rebuild tracking and lists, then switch campaigns in stages.
Tutorialintermediate15 min readUpdated

When a new account is the right answer

Starting again comes after two other routes, and each of those keeps something this one loses. The first is to move ownership of the existing account, with its history, into the business's hands; the manager accounts and access guide treats that as the business's first job when an account sits under an agency, and the diagnosis for agencies that keep hold of ad accounts works through the contract, the administrators and the billing when the request stalls. The second is to stay in the old account on terms the business controls: owner and deputy as administrators, the supplier reduced to a manager account link. Only when neither is on offer does a new account make sense.

The cost is real, and the site's guides spell it out. The tutorial for inheriting someone else's marketing prefers a transfer because a replacement account begins with none of the old one's conversion history, audiences or bidding learning, and the diagnosis of results that fell after a change of agency lists quality history alongside them. The agency offboarding checklist gives the fallback in a few lines: where no transfer is possible, take every export on offer, ask to go on reading the old account while its holder permits, and write the gap into the handover note so the next team expects bidding to relearn. This tutorial is that fallback, in order.

The same steps apply when the business changes owner or divides and the account goes with the other side. They do not apply to an account the business already controls but dislikes: a muddled account is judged through an audit first, and whatever the audit finds is fixed inside the account that already holds its history and lists. Where nobody can reach the old account to read or pause it, recovery and stopping its spend are questions for the Google Ads help centre, which this page does not cover.

What the new account starts without

No object travels from the old account to the new one in these steps. Whether any part of a campaign can be copied between accounts, and by which route, is a question for the Google Ads help centre; the steps below assume every object is rebuilt from the business's own copies, and they plan around the empty state each new object begins in.

ObjectIn the new accountWhat the site's guides say
Conversion history and reportsBegins with the first conversion the new tags recordHistory stays in the old account; keep exported copies for reference
Bid strategiesNew strategies on new campaignsA newly created strategy goes through a learning period, and Google documents no way to move history between campaigns
Conversion actionsCreated again, with new tag identifiersThe conversion ID belongs to the account and the label to the action, so every tag changes
Tag-based audience listsFill from the day the new tag firesA new tag has no history, and a list needs enough members before it can serve
Viewer and subscriber listsFill from the day the YouTube channel is linkedThey begin to fill only once the channel is linked to the account
Lists shared from the GA4 propertyExported to the new account through its linkWhether an existing audience arrives with its members is for the help centre; one created now fills from that day
Customer listsUploaded again from the business's own recordsOnly rows matched to signed-in users can be reached or excluded
Shared negative and placement listsRecreated from the copiesA list shared through the agency's manager account stays with the agency
Ads and assetsWritten again from the copiesNew ads are reviewed before they can serve

Before you start

  • A written record of the requests, kept as general practice: the date of each request, who received it, what was asked and what came back. An auditor, the business's legal advisers or a future owner may need it.
  • Read access to the old account for as long as it lasts. If the holder is about to remove it, copy first and leave everything else on this page until afterwards.
  • A Google login the business controls, with administrator rights to its tag manager container, its GA4 property and its Merchant Center account. If the container or the property also sits with the other party, those moves come first: the GA4 property replacement tutorial covers the property and, in its preparation, the container.
  • Dates for the switch, agreed in writing as general practice with whoever holds the old account, together with their part in it: keeping the old campaigns running until each group's switch date and pausing each group on that date, before its replacement starts. Without that agreement, stopping the old campaigns rests with the holder.
  • The business's own counts of orders, enquiries or bookings, so that both accounts can be judged against something neither of them produced.
  • The setup decisions for a new account, made in advance with the new ad account setup checklist: ownership, access, billing in the business's name and a record kept where the business stores its documents.

The steps

  1. Confirm the old account can be neither transferred nor kept

    Make the two requests the agency handover diagnosis sets out, in writing and naming the account by its customer ID: move ownership of the same account to the business, or make a named owner and deputy at the business its administrators. If the agency is slow to release the account, the offboarding checklist takes the request past the day-to-day contact to whoever signed the contract. If the business turns out to hold administrator rights already, stop here and take the account back through the access guide instead, because a recovered account keeps the history that this page cannot rebuild. As general practice, write down each request, each answer and the date of the decision to start again; the diagnosis leaves the contract, and any dispute over it, to the business's legal advisers.

  2. Copy what only the old account holds

    Take copies while the old account is still readable, because the rebuild in the later steps works from them. The agency handover diagnosis lists what to export while access lasts, among them the change history, which records who changed what and when, as the change history tutorial describes; follow it and add what a rebuild needs beyond it: the text and final URLs of every ad and asset, each keyword with its match type, the shared negative and placement exclusion lists, the search terms report, and monthly results by campaign for as far back as the business compares. The backup guide for marketing tools explains why lists that live in someone else's account need a copy of the business's own, and this step is where that copy is taken. Store everything in the business's own storage, out of the supplier's reach.

  3. Create the new account under a business-owned login

    Work through the account-layer steps of the new account setup tutorial: ownership and a deputy, a login the business controls, time zone and currency chosen on purpose, users at the lowest level their work needs and an agency or freelancer linked through its own manager account. Its links, tracking and shared-list steps are taken below, rebuilt from the copies. Keep the old account's time zone and currency unless they were mistakes, so that a day and a cost mean the same on both sides of the switch. Put billing in the business's name from the start; the old arrangement is the reason this page exists.

  4. Rebuild conversion tracking before any campaign

    Measurement comes first, as it does in any new account. Turn on Auto-Tagging and create each Conversion Action again from the copied list, each with the primary or secondary role it had, so that bidding and reports count the same outcomes on both sides of the switch, and leave out an old action only once its purpose is known. Then follow the conversion tracking setup tutorial for the tags: its step on identifiers explains that the conversion ID is shared across an account and the label belongs to each action, so none of the old tags can be reused. Add the new tags beside the old ones, as general practice, rather than in their place, because the old campaigns still run and still need theirs. Where closed sales are uploaded from a CRM, the offline conversion upload procedure keys each upload to an action's exact name, so, as general practice, start uploads to the new actions on the day the first new campaign starts and leave any upload to the old account in place while its groups still run, as with the tags.

  5. Link analytics, YouTube and Merchant Center and start the audience lists

    Link the business's GA4 property, and with personalised advertising enabled its audiences are exported to the new account, as the GA4 and Google Ads integration tutorial describes; an audience created for the move fills from the day it is created, so expect small lists at first. As the setup tutorial's linking step also advises, link the YouTube channel now rather than at launch, because the YouTube audience targeting guide notes that viewer and subscriber lists only start filling once the link exists. Link Merchant Center where the business runs product campaigns; the product feeds guide explains that product listings need that link. Whether the GA4 property, the YouTube channel or Merchant Center can stay linked to the old account at the same time is a question for the help centre, not this page. Build the site-visitor lists for Remarketing from the new tag on the same day: the guide to audience segments in search points out that a new tag has no history and that a list must reach a size before it serves. Upload customer lists again from the CRM, as the guide to excluding existing customers describes, remembering that unmatched rows can be neither reached nor excluded.

  6. Recreate the shared negative and exclusion lists

    Rebuild the shared lists of Negative Keywords and Placement Exclusions from the copies before any campaign spends. The results-dropped diagnosis names lists left out of a rebuild among the causes of a new start buying the wrong traffic, and the negative keywords guide explains how negative match types behave and which conflicts to look for. Some entries will look odd. Apply Chesterton's fence before dropping any of them: look for the reason in the search terms export, the change history and the old team's notes, and ask whoever added it. Drop an entry whose reason no longer applies; where no reason turns up, leave it out only as a step that can be reversed and read the search terms and placements once the campaigns run, as the framework advises when no reason can be found. Write down each decision and its reason for whoever reviews the lists next.

  7. Rebuild campaigns from the copied structure, largest first

    Rebuild the campaigns in groups, starting with the largest, such as the generic campaign that carries the bulk of the enquiries or sales. Write each group into a search campaign build sheet from the copies, so a reviewer can compare it with the old account before anything is created. The account structure guide sets the migration rules this step borrows: migrate a segment at a time and carry over negatives, audiences and the best ads. As general practice, keep any restructure for later, so that a fall in results has one possible cause rather than two. Fix only what the old account's own figures prove was wrong; the naming conventions guide is the one exception worth taking now, because names are cheapest to set on objects that are being created anyway. Every new ad goes through review, which the guide to ad policies and disapprovals describes, so leave time for it before a group is due to switch.

  8. Start bidding without history

    The new campaigns have none of the old account's conversions, whatever the exports say. The Smart Bidding strategies guide advises running without a target when there is no reliable history, letting a campaign show what it can achieve at its budget, then adding a target near the observed figure and tightening it in steps. Smart Bidding also enters a learning period once a strategy is created, during which performance can fluctuate however good the build. Where conversions will be thin, the guide to bidding with few conversions covers judging the results over longer windows. Use the old account's results to set expectations and the business's margins to set the eventual target; neither sets the first one.

  9. Switch campaign groups in turn

    As general practice, switch one group at a time: on each group's switch date, ask the holder to pause the old group, and enable its replacement once the pause is confirmed. Once the group has served, check that its ads are approved, its conversion actions are recording, and its search terms resemble the old group's. Then move to the next group. As general practice, draw the groups in the build sheet so that a switched group shares no keyword with a group still running in the old account, and put into one group any campaigns whose match types could reach the same searches, so that they switch on the same date. This tutorial plans no period in which both accounts run the same campaigns or keywords: how Google Ads treats two accounts of one business that enter the same auctions is a question for Google's policies and help centre, not for this page. Keep the switch record simple: which old campaign each new one replaces, and the date it took over.

  10. Reconcile with the business's records and mark the break

    Every report that crosses the switch compares two accounts with different histories, so treat each switch date as a break, as the guide to comparing periods recommends for any change in how figures are collected: compare within the new account, or switch to a figure the move left alone, such as orders or leads in the business's own systems. Once every group has switched and the new account has a closed period of its own, run the reconciliation with sales records on the new account so the business knows how its platform figures relate to real outcomes before the eventual target is set on them. Note each switch date on every dashboard and report that carries Google Ads figures.

  11. Close the old account's loose ends and record the move

    When every old campaign is paused, ask the holder, as general practice, to remove the logins of the business's own staff that are no longer needed, keeping the read access asked for below, and record the answer. Then turn to the old account's tags on the site: pause them in the container first and watch the new account's conversions against the business's own records before removing them, which is the switch-off-before-deleting habit the fence framework recommends; whether visitor data should keep reaching an account the business does not control is a question for whoever owns privacy, as the guide to stopping a paid advertising channel says of tags with no remaining purpose. Ask for read access to the old account for as long as the holder will allow, and keep the copies while the business still reads that history. Finally, write each milestone into the Decision Log with its date and reason, using the marketing decision log template, and complete the new account's setup record so the next person to inherit it knows where the old history lives.

A tree surgery firm leaves its former agency's account (illustrative)

Illustrative example — not a real result

Krosmavel Tree Surgery starts again in an account it owns

Krosmavel Tree Surgery, an invented firm with 3 crews, spends about £2,600 a month on Google Ads through an account its former agency opened under the agency's own manager account and paid for on the agency's card. After 3 written requests over 5 weeks the agency declines to transfer it or to make the firm's own people its administrators, but agrees to keep the campaigns running for 30 days, to pause each one when asked and to leave read-only access in place until then. Before anything else the owner exports 4 campaigns, 31 ad groups, 2 shared negative lists holding 212 terms, a placement exclusion list of 64 sites, 6 conversion actions, 18 months of search terms and 24 months of monthly results.

DayStepWhat happened
2New accountCreated under the firm's office login; owner and office manager as administrators; a freelancer linked through her manager account
3Tracking and lists2 primary actions (quote requests and calls from ads) and 1 secondary recreated in their old roles; 3 traced to forms the site no longer has were left out with a note; new tags published beside the old ones; GA4 linked and site-visitor lists started
4Negatives and exclusionsAll 3 lists rebuilt; 9 entries nobody could explain checked against the search terms export and the change history: reasons found for all 9, so 4 that no longer applied were dropped with a note and 5 kept
9First groupThe agency pauses its emergency tree removal campaign; the new one is enabled the same afternoon on maximise conversions with no target
16Second groupStump grinding and hedge work switched after its new ads were approved
25RemarketingDisplay remarketing switched once the new site-visitor list is large enough to serve
30Old accountThe agency confirms every old campaign is paused; old tags paused in the container, then removed on day 37
52TargetsA target of £36 per quote request added to the removal campaign, close to what it achieved from day 20 to day 50

Quote requests in the firm's job system run at 104 in the month before the move, 88 in the switch month and 109 in the month after. The monthly report marks days 9, 16 and 25 as breaks, compares the new account only with itself and reads the business's job system for the year-on-year view.

The Google Ads account hub maps the levels of an account and gathers the guides on setup, access and changes of agency.

Common mistakes

  • Opening a new account while the old one could still be transferred. A recovered account keeps its history, lists and learning; ask in writing, and through the contract, before building anything.
  • Copying too late. Once read access ends, the structure, the search terms and the evidence behind the lists go with it.
  • Switching a group before the new tags record. Its spend cannot be read until they do, and bidding learns nothing from it.
  • Adding the new tag at the switch. Lists built on it start empty that day; put it on the site at the start.
  • Dropping negatives and exclusions before looking for their reason. Find out why they were added before the new account pays to relearn the lesson.
  • Restructuring during the move. Two changes at once leave a fall in results with two possible causes.
  • Copying the old account's targets onto new campaigns. They have no history yet; start without a target and add one from what the new campaign achieves.
  • Letting both accounts run the same campaigns. Pause each old group before its replacement starts.
  • Reading figures that span the switch as growth or decline. Mark the break and compare within the new account or against the business's own records.
  • Leaving the old account's tags on the site. Pause them, watch the new account's conversions, then remove them.

Frequently asked questions

Can the campaigns and their history be moved from the old account into the new one?

This tutorial assumes that nothing moves. History stays in the account that earned it, and Google documents no route for carrying it into a rebuilt campaign, so each one starts learning again. Copy what the old account holds while you can still read it, and check the help centre for any route it offers for copying campaign settings before planning around one.

Should the old and new accounts run side by side?

Not with the same campaigns. Switch campaign groups in turn, with each old group paused before its replacement starts, but put the new account's tags on the site at the very beginning, so its audience lists fill and each tag can be tested before any campaign needs it. How Google Ads treats two accounts of one business in the same auctions is a question for Google's policies and help centre.

How long before the new account performs like the old one did?

This tutorial sets no period, and the guides it relies on give none. Each rebuilt campaign learns from the conversions it records itself, so the wait depends on how many arrive and how steady the account is kept while they do. Judge progress on the business's own orders or leads over closed periods, comparing the new account with itself and with the business's records rather than with the old account's columns.

Terms used on this page

Frameworks

Sources

  1. Google Ads Help — Google Ads Help
  2. About conversion tracking — Google Ads Help
  3. About Smart Bidding — Google Ads Help
  4. Google Ads policies — Google Ads Policy Help

Related