Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Google Ads & PPC › Troubleshooting

Google Ads Ad Strength Poor

Why a responsive search ad rates Poor ad strength and what to change: too few assets, repetitive headlines, missing keywords, heavy pinning, mixed groups.
Troubleshootingintermediate8 min readUpdated

First, decide whether the rating matters: read the ad's results

Open the ad group and put the rating beside the results for each ad over a period with enough clicks to read: click-through, conversions, conversion rate and cost per conversion. Three situations come up. A new ad with no history and a Poor rating has nothing else to judge it by, so the rating's suggestions are the best available guide. An established ad with a Poor rating and weak results is probably weak for the reason the rating gives. An established ad with a Poor rating and the best results in its group is telling you that the rating measures something other than what you are paying for.

Then read the suggestions attached to the rating, which name the gap: add more headlines, include popular keywords, make headlines more distinct, make descriptions more distinct, unpin assets. Each maps to one cause below. The responsive search ads guide explains how the ad is assembled and how assets should be written; this page decides which ratings to act on and in what order. Where the question is how ad strength relates to the keyword's Quality Score, the comparison of Quality Score and ad strength separates the two ratings.

Diagnosis table

Diagnosis

SymptomCheckLikely causeFix
Suggestion to add more headlines or descriptionsNumber of assets against what the format allowsToo few headlines or descriptionsAdd distinct assets until the pool covers each message role
Suggestion to make headlines more distinctWhether headlines are rewordings of one or two ideasHeadlines repeating the same ideaReplace near-duplicates with headlines that make different claims
Suggestion to include popular keywordsAd group keywords against the words in the headlinesAd group keywords missing from the headlinesWrite several headlines that use or paraphrase the keyword theme
Suggestion to unpin, with several positions fixedPins per position; whether each pin is requiredSeveral pins limiting the combinationsRemove optional pins; pin several alternatives to a required position
Keyword suggestions conflict, and no headline set fits all of themThe spread of meanings among the ad group's keywordsAd group mixing intents, so no headline fits every keywordSplit the ad group by intent, then write a pool for each

Fix, verify and prevent each cause

A pool too thin to combine

A responsive search ad works by testing combinations, and an ad with only a handful of headlines has few combinations to test. The rating flags it, and the flag is fair: the system has little to choose from for different queries and devices.

Fix: add headlines and descriptions until each role in the pool is covered several times, keyword headlines, proof, offer, call to action and brand, writing each to stand alone, as the responsive search ads guide lays out in its table of roles. The help page on responsive search ads documents how many assets the format accepts and how many it shows at once.

Verify: the rating moves up as assets are added, and over the following weeks the asset report rates the new assets rather than leaving them all in learning.

Prevent: draft the full pool before the ad is built, rather than launching with a few lines and promising to add more.

Many headlines, one idea

Many ways of saying "affordable plumbing" are still one headline for the purpose of testing. Near-duplicates fill slots the system could have used to try a different message, and the rating says so. This often happens when headlines are written by varying a template one word at a time.

Fix: group the existing headlines by the claim they make, keep the best phrasing of each claim, and replace the rest with headlines that make different claims: a qualification, a guarantee, a speed promise, a price frame without figures that change.

Verify: the rating's distinctness suggestion disappears, and the combinations report shows a wider spread of headline pairs serving.

Prevent: write the pool from a list of messages, not from a list of phrasings, and have someone other than the writer check it for repeats.

Headlines that never mention what people searched

An ad group built around a keyword theme, with headlines that talk only about the brand or generic benefits, gives the system no relevant assets to match to the query. The rating's keyword suggestion fires, and the same gap tends to show in the ad relevance component of Quality Score.

Fix: write several headlines that contain or paraphrase the ad group's keywords in different forms, and check that the landing page uses the same words; the Quality Score guide explains how ad relevance is judged, and the Quality Score help page describes the components.

Verify: the keyword suggestion clears, and over the following weeks ad relevance for the group's main keywords holds or improves.

Prevent: start every new pool with the keyword headlines, before benefits and calls to action.

Pins that fix too much

Pinning forces an asset into a position, and every pin removes the combinations that would have put something else there. Google documents that ad strength takes pinning into account, so an ad with several pins rates lower even when its copy is good. Some pins are necessary: a mandated disclaimer, a brand name that must lead. Many are not; they exist so the preview reads nicely.

Fix: list each pin with its reason, remove the ones without a business or regulatory reason, and where a position must hold a type of message, pin several alternative assets to it so the system still has a choice, as the responsive search ads guide recommends.

Verify: the unpin suggestion weakens or clears, and click-through (CTR) holds or improves over the following weeks.

Prevent: require a reason for every pin in the ad build notes, and accept a lower rating where the reason is real.

An ad group whose keywords want different things

Sometimes the rating cannot be fixed inside the ad, because the ad group holds keywords that want different answers: repair and installation, a product and its finance, a service and a job vacancy. Headlines relevant to one are irrelevant to the others, the keyword suggestions conflict, and any pool that covers everything says nothing clearly.

Fix: split the ad group into intent groups, sets of queries that want the same answer and can share a landing page, as the account structure guide describes, then write a pool for each.

Verify: each new ad group's ad reaches Good or better with fewer assets than the mixed group needed, and cost per click (CPC) on the moved keywords holds or falls as relevance improves.

Prevent: add keywords to an existing ad group only when its current headlines would already suit them.

Prevention: an asset brief per ad group

Most Poor ratings come from ads written in a hurry inside the interface. A short brief per ad group, written before the ad, prevents almost all of them. The brief states the intent the ad group serves, the keyword theme in the words people use, the landing page, and the messages the pool must carry, each with several candidate headlines: theme, proof, offer, action and brand. It lists any mandatory wording and where it must appear, which is the only legitimate reason for a pin. With that in hand, the pool is complete and varied on the first build, and the rating confirms it rather than prompting it.

Pair the brief with a review rule. Build every ad to Good or better as a floor, because a Poor rating on a new ad nearly always means the system has too little to work with. After launch, stop managing the rating and manage the results: read the asset report on a schedule, replace assets rated Low, leave learning assets alone, and keep the responsive search ads guide open for the writing itself. If an ad's rating falls because a required pin was added, record the reason beside the ad so the next person does not undo it. And when the brief cannot be written because the keywords want different things, that is the signal to restructure before writing anything.

Illustrative example — not a real result

An accountancy firm's Poor ads, fixed and left alone

An accountancy firm has two search ad groups rated Poor. The first, "self-assessment tax return", has one ad with 6 headlines, four of them variations on "Tax Return Help", and no pins; it has a 3.1% click-through rate and a £48 cost per enquiry, the worst in the account. The team adds 9 headlines covering a fixed fee frame, accreditation, turnaround and a call to action, and two descriptions with distinct details. The rating moves to Good; over six weeks click-through rises to 4.6% and cost per enquiry falls to £36. The second, "brand", rates Poor because the firm's name is pinned to position one and a regulatory line to position two. It has a 22% click-through rate and the lowest cost per enquiry in the account at £9. The team leaves it as it is and notes the reason for both pins.

Common mistakes

Chasing Excellent with filler headlines. Unpinning a line the business is required to show. Replacing a proven ad to move a rating. Writing variations of one headline instead of different messages. Trying to fix a mixed ad group with copy. Treating the rating as a performance score.

Frequently asked questions

Does Poor ad strength lower my Quality Score or raise my costs?

Not directly. Google states that ad strength is not a factor in the auction; the auction uses the expected performance of the ad at auction time. The causes behind a Poor rating can hurt performance, though: an ad group whose headlines never mention its keywords tends to rate poorly on ad relevance, which is one of the Quality Score components. Fix the cause, not the label.

My ad rates Poor but converts better than the others. Should I change it?

Look at why it rates Poor first. If the reason is pinning that regulation or the brand requires, accept the rating and keep the ad. If the reason is a thin pool, add distinct headlines in a second ad or as new assets without removing the ones that work, and judge the result on conversions and cost per result. Never replace a proven ad only to move a rating.

How long does it take for ad strength to update?

Ad strength is calculated from the assets themselves, so the rating updates as soon as the assets are edited, before the ad serves. Performance takes longer: new assets show as learning in the asset report until they have enough data. Judge the rating immediately and the results over the following weeks.

Terms used on this page

Where this page is used

Also related

Sources

  1. About responsive search ads — Google Ads Help
  2. About Quality Score — Google Ads Help

Related