Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Google Ads & PPC › Troubleshooting

Display or Video Campaign Not Spending

Why a Google Display or YouTube campaign spends little: stacked targeting, small lists, frequency caps, strict exclusions, tight targets or unapproved ads.
Troubleshootingintermediate12 min readUpdated

First, confirm the shortfall and read every status

Compare spend with the average daily budget over whole weeks, not single days, as the budget not spending diagnosis does for search campaigns; that page covers bids, keywords, demand and Ad Rank on Search, and the Performance Max not spending diagnosis covers Performance Max. This page is for Display campaigns on the GDN and YouTube video campaigns, most often a remarketing campaign or a tightly targeted prospecting campaign.

Then read every status from the top down. The status messages guide explains that statuses follow the account's layers and that a status at a higher level governs everything beneath it, so a paused ad group or an ended campaign serves nothing however eligible its ads look. Read the campaign, each ad group, each ad and asset, the bid strategy and the audience lists in turn. The hover text beside each status in the account is the reference, because wording varies by campaign type and changes over time.

Finally, note the shape of the shortfall, because each cause leaves a different one.

Shape of the shortfallWhat it suggestsCheck first
Almost no impressions from launchA status, an approval or a list that cannot serveStatuses; list size and status in the audience manager
Spend stops at the same time each dayA frequency cap reached early by a small audienceFrequency in the reach reports; list size
Spend low from the start, cost per thousand impressions highLayers or exclusions leaving too little inventoryTargeting in each ad group; exclusions and inventory settings
Spend fell after a target or bid changeA bid or target the auctions cannot meetChange history; bid strategy status
Spend falling slowly week by weekA list shrinking or filling slowlyList size over time; consent coverage

Diagnosis table

Diagnosis

SymptomCheckLikely causeFix
Low spend and high cost per thousand impressions in an ad group with several targeting typesTargeting tab of each ad group; audience and content layers combinedTargeting layers stacked in one ad group until few people qualifySplit audience and content into separate ad groups; keep one idea per ad group
Remarketing ad group barely serves; list small or not eligibleList size and status in the audience manager; membership duration; consent coverageA remarketing or customer list below the size it needs to serve, or small for the budgetWiden membership, combine lists, fix the source, or cut the budget to the list
Delivery stops early each day or week; frequency at the capFrequency cap setting; reach and frequency reportsA frequency cap that a small audience reaches early in each periodSet the cap from the list size, or grow the audience
Impressions low after new exclusion lists or a stricter inventory settingPlacement, topic and content exclusions; inventory type; account-level listsExclusions, placement lists or inventory settings stricter than intendedRemove over-broad exclusions; revisit the inventory setting
Spend fell after a target or bid change; strategy reads limited or learningBid strategy status; target against recent actuals; campaign goalA bid, target or goal the available auctions cannot meetLoosen the target in steps; check the goal suits the formats
Ads not serving or serving in few slotsAd and asset statuses; policy detail; asset report; image shapesAds or assets disapproved, under review or unable to fill the slotsFix the policy cause; add the asset shapes the slots need

Fix, verify and prevent each cause

Targeting layers stacked in one ad group

The Display targeting options guide states the trade plainly: each targeting method added to an ad group removes everyone it does not describe, so the more precisely an ad group describes its audience, the fewer impressions it can win and the higher the cost per thousand impressions tends to be. The video audience targeting guide adds that stacking an in-market segment, a topic and a placement list in one ad group is the commonest way to build a video campaign that cannot spend, and that content and audience are more often run in separate ad groups than stacked.

Fix: put one idea per ad group: the audience in one, the content targeting in another, and remove layers that were added out of habit rather than for a reason.

Verify: the split ad groups each record impressions, spend rises towards the budget, and the cost per thousand impressions falls, which the CPM calculator makes comparable across ad groups.

Prevent: write the reason for every layer in the campaign brief, and layer within an ad group only when the precision is worth the lost Reach.

A list too small to serve, or too small for the budget

The remarketing entry records that the platforms publish minimum audience sizes below which an audience will not serve, and that audiences built from a tag fill only with visitors who consented to advertising cookies, so lists shrink wherever consent rates are low. The targeting guide adds that small lists with large budgets produce high frequency, and that membership duration should match the purchase cycle. The current minimums are on Google's help pages; this page does not repeat a figure. When the list is built in Google Analytics, the diagnosis for a GA4 audience not populating covers the conditions, link and consent settings that keep it empty.

Fix: lengthen membership duration where the purchase cycle allows, combine narrow Remarketing lists into one broader list, repair the tag or consent setup that feeds it, and size the budget to the list rather than the list to the budget.

Verify: the list's size and status in the audience manager show it eligible, and the ad group records impressions without frequency climbing.

Prevent: check list sizes before a remarketing campaign is built, and review them monthly alongside consent coverage.

A frequency cap that a small audience reaches early

The video audience targeting guide describes frequency capping as limiting impressions or views per person per day, week or month, and notes that a small remarketing list hits any cap quickly; the Display launch tutorial asks for a cap on every remarketing campaign for the same reason. A cap is right to have, but on a small audience it also sets the ceiling on spend: once everyone on the list has seen the ad the permitted number of times, delivery stops until the next period.

Fix: derive the cap from the list size and the budget with the reach and frequency calculator, and if a sensible Frequency cannot spend the budget, reduce the budget or widen the audience rather than raising the cap until people tire of the ad.

Verify: spend runs through the day or week instead of stopping early, and the delivered frequency in the reach reports sits near the cap without passing it.

Prevent: set caps from audience size at build time, and recheck them whenever the list or the budget changes.

Exclusions, placement lists or inventory settings stricter than intended

The placement exclusions entry explains that an exclusion acts before the auction: an impression on an excluded placement is never bid for. The targeting guide adds that Google's content exclusions and inventory tiers trade reach for stricter standards, and account-level lists apply to every eligible campaign. A list built to remove poor inventory can grow until it removes most of the inventory, especially when whole app categories or broad topics are excluded, and a stricter inventory tier shrinks the pool for every campaign at once.

Fix: read the exclusion lists applied to the campaign at every level, remove entries that block more than they were meant to, and revisit the inventory setting if the brand can accept a wider standard. The opposite problem, spend reaching placements that should have been excluded, belongs to the low-quality placements diagnosis.

Verify: impressions return without the placement report filling with sites the exclusions were meant to stop.

Prevent: review exclusion lists on a schedule, recording why each entry was added, so that removing an outdated one is a decision rather than a risk.

A bid, target or goal the available auctions cannot meet

The Smart Bidding strategies guide notes that a target the model cannot meet in most auctions causes it to bid low or not at all, so spend falls while the reported return on the little it spends often looks good, and that a target means the budget may go unspent. A video campaign has a second constraint: the YouTube ad formats guide explains that the campaign goal and subtype decide which formats the campaign can serve and how it bids, so creative built for formats the goal does not offer cannot fill its slots. The guide also notes that action-oriented video campaigns have been moving into Demand Gen, which this site does not document; the help centre is the reference there.

Fix: compare the target with what the campaign achieved before it was set and loosen it in small steps; check that the Bid Strategy suits the campaign's job; confirm the goal and subtype offer the formats the creative was made for.

Verify: the bid strategy status settles and spend rises towards the budget with cost per result inside what the business can pay.

Prevent: set targets from recent actuals and economics, and choose the goal from the creative plan before the campaign is built.

Ads or assets disapproved, under review or unable to fill the slots

The ad policies and disapprovals guide sets out the statuses: under review means the ad has not been reviewed yet, limited by policy means it can serve only in some places or to some people, and disapproved means it cannot serve. The fix is the cause, not a copy of the ad. A display campaign can also be short of slots for a reason that is not policy: the responsive display ads guide explains that the format assembles its assets into whatever shape the won slot needs, so a pool missing landscape or square images, or either logo shape, fits fewer slots, and fixed-size image ads cannot fill native placements at all.

Fix: read the policy detail on each limited or disapproved ad and fix the text, asset or destination before resubmitting; add the image and logo shapes the format uses, and run responsive display ads beside any image ads.

Verify: ads and assets read approved or eligible, and the asset report shows the new images serving.

Prevent: include an approval check in every launch and creative change, and build asset pools that work in every slot rather than one layout.

Prevention: sizing the audience before the budget

Every cause above is a version of the same planning error: the budget was chosen before anyone asked how many people, and how many placements, the campaign would be allowed to reach. A search campaign is limited by how many people search; a Display or video campaign is limited by how many people and pages its targeting, lists, caps and exclusions leave. The prevention is to size the audience first and let it set the budget.

Before launchQuestionWhat it prevents
Audience sizeHow many people can each ad group reach once every layer and exclusion is applied?Budgets larger than the audience can absorb
List eligibilityIs each list above the network's published minimum, and is it still filling?Remarketing ad groups that never serve
Frequency planAt the planned cap, how much can this audience absorb each period?Caps that stop delivery by mid-morning
Layer reasonsDoes every targeting layer and exclusion have a written reason?Precision added by habit
Goal and creativeDoes the campaign goal offer the formats the creative was made for?Video ads with nowhere to serve
Asset shapesDoes each responsive display ad carry the image and logo shapes the format uses?Ads shut out of whole classes of slots

The reach and frequency calculator turns the first and third questions into arithmetic: an audience of a known size, at a chosen frequency, can absorb only so much budget, and anything above that buys repetition. The comparison of prospecting and remarketing makes the same point at budget level: remarketing spend should scale with the size of the remarketing pool, and when the pool stops growing or frequency keeps rising, the surplus belongs in prospecting.

After launch, read three reports weekly for the first month and monthly after that: spend against budget by ad group, delivered frequency against the cap, and the size of each list. A campaign that underspends while all three look normal is usually held back by a target, which the bid strategy status confirms. When a video campaign spends but holds attention poorly, the low view rate diagnosis is the next stop, and the collection of Google Ads troubleshooting pages covers the other neighbouring symptoms.

A climbing centre gets its campaigns spending (illustrative)

Illustrative example — not a real result

Zormick Climbing Centre

Zormick Climbing Centre, an invented indoor climbing centre, runs a Display remarketing campaign at £40 a day and a YouTube consideration campaign at £60 a day, and over four weeks they average £14 and £23 a day. The Display ad group layers its site-visitor list with a sports topic and an in-market segment for fitness. The list holds about 2,600 people on a 30-day membership and fills slowly, because roughly 55% of visitors decline advertising cookies, and a daily cap of 3 impressions per person stops delivery most days by mid-morning. The video ad group stacks a custom segment built from climbing searches with a placement list of 12 channels. The centre leaves the list alone in the remarketing campaign and moves the topic and the in-market segment into separate ad groups of a new prospecting campaign at £15 a day, cutting the remarketing budget to £25. It lengthens the membership to 90 days and uses the reach and frequency calculator to replace the daily cap with a weekly cap of 10 set from the list size. On YouTube it moves the placement list into an ad group of its own and leaves the custom segment unlayered. Over the following fortnight the remarketing campaign spends £24 a day at a weekly frequency of 7, the prospecting campaign £14, and the video campaign £56.

Common mistakes

  • Raising the budget of a campaign that cannot spend. The limit is the audience, not the money; the extra budget goes unspent or buys repetition.
  • Stacking every targeting option in one ad group. Each layer removes people; together they leave too few to spend on.
  • Turning on optimised targeting to rescue remarketing. It spends on people who are not on the list.
  • Raising the frequency cap to force spend. The same people see the ad more often while reach stays flat.
  • Letting exclusion lists grow without review. Lists built against poor inventory can end up removing most of the inventory.
  • Copying a disapproved ad instead of fixing it. The copy carries the same problem back into review.

Frequently asked questions

Will raising the budget make a Display or video campaign spend more?

Not when the campaign is already leaving budget unused. The limit is the number of people and placements it is allowed to reach at the price it will pay, so a larger budget changes nothing until the targeting, the list, the cap, the exclusions or the bid is loosened. Raising the budget of a small remarketing campaign mostly raises how often the same people see the ad.

How big does a remarketing list need to be before it serves?

Google publishes minimum list sizes below which an audience will not serve, and they differ by network, so the current help page is the reference rather than any figure repeated elsewhere. Read the list's size and status in the audience manager. A list that meets the minimum can still be too small for its budget, which shows as high frequency and unspent money.

Should I turn on optimised targeting to make a remarketing campaign spend?

Usually not. Optimised targeting looks beyond the chosen segments for people likely to convert, so it would spend the budget on people who are not on the list, which defeats a remarketing campaign. Fix the list, the layering or the cap first, and if the list simply cannot carry the budget, move the surplus to a prospecting campaign built for that job.

Terms used on this page

Tools to try

Where this page is used

Sources

  1. About targeting for Display campaigns — Google Ads Help
  2. About audience targeting — Google Ads Help
  3. About video ad formats — Google Ads Help
  4. About responsive display ads — Google Ads Help
  5. Google Ads policies — Google Ads Policy Help

Related