Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Google Ads & PPC › Troubleshooting

Google Ads Low Click-Through Rate

Why Google Ads click-through rate is low: searches the ad was not written for, headlines that miss the query, low positions, missing assets and rival offers.
Troubleshootingintermediate12 min readUpdated

First, confirm the click-through rate is low for a reason worth fixing

A click-through rate is an average, and averages hide their parts. Before changing an ad, segment the figure the way the account is built: by campaign, so brand, generic and competitor terms are read apart; by network, so Google Search is read without search partners, as the clicks but no conversions diagnosis recommends for the same reason; and by device and ad group, so one weak corner is not mistaken for a weak account. A generic campaign that looks poor beside the brand campaign may be perfectly healthy; brand searchers were looking for the business and click almost automatically.

Some lows are the intended result, and fixing them would make the account worse.

SituationWhy click-through is lowHow to judge it instead
Competitor keywordsThe searcher wanted someone else, and the ad cannot use the rival's nameOn new customers and what they cost, as the competitor names guide sets out
Qualifying copyPrices, minimums or service areas in the ad deliberately deter people who cannot buyOn cost per qualified lead, as pre-qualifying search ads explains
Search partners or Display inside a search campaignTraffic that behaves differently from Google SearchRead Google Search on its own, then decide on the network setting
Broad discovery keywordsTheir job is to find new searches, many of which will not suit the adOn the searches found and the conversions they bring
Brand and generic blendedBrand click-through is high almost by defaultRead each campaign against its own history

Then put click-through beside conversions. The comparison of CTR and conversion rate explains why the pair, not either rate alone, shows whether the ad, the page or the audience is at fault: a low click-through with a strong conversion rate is a narrow funnel that may be working as designed. Finally, open the keyword columns for Quality Score. The Quality Score guide describes expected click-through as a keyword-level prediction, rated against other advertisers on the same searches and excluding the effects of position and assets. A keyword rated Below average there points at the ad and the searches; a keyword rated Average or better whose observed rate is still low points at position and assets first. That second reading follows from the documented definition rather than from a rule Google publishes, so treat it as a lead, not a verdict. The CTR calculator turns raw clicks and impressions into comparable rates when the reports export counts.

Diagnosis table

Diagnosis

SymptomCheckLikely causeFix
Many impressions from searches the ad never mentionsSearch terms report by keyword and match typeSearches the ad was never written for: loose match types and missing negativesAdd negatives, narrow the match type, give good searches their own keywords
Expected click-through or ad relevance rated Below averageQuality Score components; the headlines in the ad groupHeadlines that do not reflect what people searchedRewrite the headline pool around the ad group's theme; split mixed ad groups
Impression share steady, top-of-page rate fallingAuction insights; lost impression share due to rankAds finishing low on the page because Ad Rank is held back by quality or bidsImprove the quality components; bid more only where the economics allow
Assets rarely or never servedAsset report; asset status; ad positionFew or no assets showing, so the ad is smaller than its rivalsAdd and approve relevant assets; fix the position that keeps them hidden
A new or stronger name above you on most searchesAuction insights overlap, position above and outrankingCompetitors with a stronger offer on the same searchesSharpen the offer and the proof in the ad, or decide the terms are not worth contesting
Product ads with impressions but few clicksClick-through by product group; titles, images and prices beside rivalsProduct ads whose title, image or price lose the comparisonRewrite titles, replace weak images, review prices

Fix, verify and prevent each cause

Searches the ad was never written for

A keyword's match type decides which searches it can enter. The match types guide quotes Google's definitions: broad match reaches searches related to the keyword's meaning, including searches that do not contain its words, while phrase and exact match stay closer to it. Every impression from a search the ad was never written for counts in the rate, and the Quality Score guide names a keyword "too broad for its ad group" as a cause of a Below average expected click-through. The Search Terms Report shows which searches triggered the ad and through which keyword.

Fix: add the unwanted searches as negatives, narrow a match type that collects mostly off-topic searches, especially where the bid strategy is not conversion-based, and give converting searches their own keywords so they get their own ad. The negative keywords guide covers where each negative belongs, and the diagnosis for irrelevant searches traces why a search matched when the problem is bigger than a few terms.

Verify: the share of impressions from wanted searches rises in the next reports, and click-through on the remaining traffic rises with conversions holding.

Prevent: review search terms on a fixed day each week for the campaigns that carry most of the spend, and add negatives as a routine rather than after a bad month.

Headlines that do not reflect what people searched

A Responsive Search Ad shows a selection of the headlines and descriptions supplied, and the responsive search ads guide explains that the system can choose headlines more relevant to the search. If no headline in the pool mentions what the ad group's keywords are about, there is nothing relevant to choose, and people scan past an ad that does not echo their words. The same failure shows when one ad group holds keywords with different meanings and one generic pool serves them all.

Fix: rewrite the pool by roles, with several headlines carrying the keyword theme in different phrasings, proofs specific to the business and a clear next step, and split any ad group whose keywords want different things, as the ad strength diagnosis describes for a pool that cannot combine.

Verify: the asset report rates the new headlines once they leave the learning state, and the ad group's click-through and the historical Quality Score columns move in the following weeks.

Prevent: write an asset brief per ad group before the ad is built, listing the theme, the proofs and the action, so every pool starts from the searches it will meet.

Ads finishing low on the page

Ad Rank decides whether an ad shows and where. The Quality Score guide lists its documented inputs: the bid, the quality of the ad assessed at the moment of the search, the thresholds an ad must clear, the competition, the context of the search and the expected impact of assets. An ad that wins its auctions in lower positions still collects impressions, but fewer people see it. The auction insights tutorial notes that losing the top of the page while keeping impression share usually costs clicks before it costs impressions.

Fix: start with whichever quality components are rated Below average, such as landing page experience or ad relevance, because better quality lifts position without a higher bid; raise bids only on terms where a higher price still pays, which the rising CPC diagnosis helps judge.

Verify: the top-of-page rate recovers on the terms that matter, and lost impression share due to rank falls.

Prevent: read top-of-page rates and rank-related lost share beside click-through each month, so a slide in position is caught before it shows up as a weak ad.

Few or no assets showing

Sitelinks, callouts, structured snippets, calls and images make an ad larger and give the searcher more reasons and routes to click. The ad assets guide sets out the documented conditions: an asset shows only when Google predicts it will improve performance and when the ad's Ad Rank is high enough, which is why ads in lower positions show fewer, and a manually created asset is preferred over an automated one of the same type at the same level. Assets must also pass policy review, and some types need a linked profile or a verified number.

Fix: check each asset's status first, add relevant assets at the level where they apply, replace automated ones that read poorly with written ones, and treat a hidden asset as a position problem when the assets are approved.

Verify: the asset report shows the new assets serving, and click-through on ads that now show them improves.

Prevent: make assets part of every campaign build and read the asset report monthly, replacing what never serves.

Competitors with a stronger offer

Click-through is relative. The Quality Score guide notes that expected click-through is rated against other advertisers on the same searches, so a rating can slip with nothing changed in the account because a rival improved. Auction insights shows who overlaps with the ad, how often each finishes above it and whether a new name has arrived. When the rival's ad offers a fixed price, a faster service or a stronger guarantee, searchers choose it.

Fix: sharpen the ad's offer and proof where the business can genuinely match or beat the rival, using the benefit and offer roles in the headline pool; where it cannot, decide whether the terms are worth contesting at all, because a better ad cannot rescue a weaker offer.

Verify: click-through on the overlapping terms recovers, and outranking share holds or improves.

Prevent: read auction insights monthly for the campaigns that carry most of the spend, and keep a note of competitors' offers beside it, so a new entrant is a known event rather than a mystery.

Product ads that lose the comparison

A product ad has no headline to write. The product feeds guide explains that the title is the headline, the image is the creative, the price is the offer and the merchant name is the brand, and that click-through on a product ad depends largely on those things and on the competitor cards shown beside it. Titles that bury the words people search, images that are cluttered or too small to read, and prices above every card beside them all lose the click.

Fix: front-load titles with what people search for, such as brand and product type, keep promotional text out of them as the product data rules require, use clean images that meet the image policy, and review the price where the product is consistently the dearest in the comparison.

Verify: click-through by product group rises after the feed updates, with conversion rate holding.

Prevent: build titles from a pattern per category and review the products with the most impressions and the fewest clicks in each feed review.

Prevention: a monthly click-through review by ad group

The causes above share a pattern: each is visible in a report that already exists, long before it becomes a complaint that the ads are not working. A short monthly review catches them while they are small.

WhenCheckWhat it prevents
WeeklySearch terms for the largest campaigns; new negativesImpressions from searches the ad was never written for
MonthlyClick-through and conversion rate by ad group, against each ad group's own historyWeak ads hidden inside healthy averages
MonthlyQuality Score components and the asset reportHeadlines that miss the query and assets that never serve
MonthlyAuction insights and top-of-page rates for the main campaignsLost position and new competitors noticed late
Each feed reviewProduct groups with many impressions and few clicksTitles, images and prices that lose the comparison
Each new ad groupAn asset brief with theme, proofs and actionGeneric pools built from habit

Run the review in that order: searches, then ads, then position and assets, then competitors and listings. A fix made to an ad while the searches are still wrong is judged on the wrong traffic. Record each change and its date, so next month's figures can be read against what was done, and read every change on conversions and cost per result as well as click-through, because an ad written only to win clicks drifts towards curious clickers. When the same weak ad group appears month after month, the cause is usually structural, and the account structure guide, which groups keywords by intent, is the next stop rather than another round of headline edits. The wider collection of Google Ads troubleshooting pages covers the neighbouring symptoms, from ads that do not show at all to clicks that never convert.

A removals firm finds its missing clicks (illustrative)

Illustrative example — not a real result

Strowpell Removals

Strowpell Removals, an invented house removals firm, sees its generic search campaign run at a click-through rate of 2.1% against 14% for its brand campaign, and the owner assumes the ads are weak. Segmenting first changes the picture. Search partners supply 38% of the generic campaign's impressions at 0.6%; on Google Search alone the rate is 3.0%. The search terms report shows a broad match keyword, removal companies, collecting storage-unit and van-hire searches that make up a fifth of the remaining impressions. In the core ad groups, none of the 12 headlines mentions house removals or the area served, and auction insights shows one rival above the firm on 61% of shared searches. The firm adds 40 negatives, moves the partners into a test campaign, rewrites each pool around its theme with the area and a fixed-quote proof, and adds sitelinks and a call asset. Over the next 6 weeks, Google Search click-through rises to 5.2% and quote requests from the campaign rise from 31 to 44 a month on the same spend.

Common mistakes

  • Fixing the average. A blended rate across brand, generic, competitor and partner traffic describes none of them; segment before changing anything.
  • Treating every low rate as a fault. Competitor keywords and qualifying copy are low by design; judge them on customers and qualified leads.
  • Rewriting ads while the searches are wrong. New headlines cannot win clicks from people looking for something else; fix the matching first.
  • Raising bids to buy position. A better position bought with a higher bid can cost more than it earns; improve quality first.
  • Ignoring assets that never serve. An approved asset hidden by a low position is a position problem, not an asset problem.
  • Chasing click-through on its own. An ad that wins clicks and loses conversions has selected the wrong people; read the cost per result.

Frequently asked questions

What counts as a low click-through rate in Google Ads?

There is no figure that holds across accounts. Click-through depends on the kind of search, the position, the assets shown and the competitors beside the ad, so a rate that is poor for a brand campaign can be healthy for a competitor campaign. Compare an ad group with its own history and with similar ad groups in the same account, and read the expected click-through component of Quality Score, which Google rates against other advertisers on the same searches.

Does a low click-through rate raise what I pay for each click?

It can. Expected click-through is one of the quality ingredients the auction assesses at the moment of each search, and stronger quality lets an ad reach the same position with a lower bid and pay less once there. A deliberate fall, such as copy that puts off people who cannot buy, can therefore raise the price per click, which is worth accepting only if the clicks that remain convert better.

Should I pause ads or keywords with a low click-through rate?

Not on click-through alone. A keyword or ad that brings conversions at an acceptable cost is doing its job even if few people click. Check what the clicks did first, then fix the cause behind the low rate, and pause only when the cost per result stays unacceptable after the fixes have been tried.

Terms used on this page

Tools to try

Sources

  1. How Google Ads works — Google Ads Help
  2. About Quality Score — Google Ads Help
  3. About responsive search ads — Google Ads Help
  4. About keyword matching options — Google Ads Help
  5. Product data specification — Google Merchant Center Help

Related