Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Marketing Research › Market and Competitor Research

Estimating Your Market Share

How to estimate your market share: match the sizing definition, pick value or volume, use sales and competitor routes, read penetration beside it, give a range.
Guideintermediate14 min readUpdated

What a market share figure can and cannot tell you

The market and competitor research hub treats market share, where a business can estimate it, as the lagging measure that shows whether a strategy is working, and attaches a condition: the figure is only meaningful when the market behind it is drawn the way the sizing work drew it. Share lags because it records what buyers have already done. And it is relative to a definition, so two people quoting different shares for one business may both be right about different markets. Every market share figure this guide produces is therefore a share of a named market.

A share can show whether the business is gaining or losing ground against everyone selling into the same defined market, which sales growth alone cannot: sales can rise while share falls, if the market grows faster. The guide to objectives and KPIs names market share among the business goals from which marketing objectives are derived. What a share cannot say is why it moved, which buyers were won or lost, or whether the definition was well chosen. It cannot be more precise than its weaker half, which for a business without category-wide sales data is the market figure. Nor is it a count of buyers, which is why penetration sits beside share in a report rather than inside it.

Share of what: value or volume, with penetration beside it

A share needs a unit. The sizing work states its unit as buyers, purchases or spend, and a share of buyers is penetration rather than market share, which leaves two units. Share by value is the business's sales revenue as a fraction of everything spent in the market; share by volume is its units or purchases as a fraction of the market's. As general practice, the two diverge whenever prices differ between sellers: a brand priced above the market average holds a larger share by value than by volume, and a discounter the reverse. Neither is the true share. Pick the unit the decision needs, match the sizing work where it counted spend or purchases, and if both can be estimated, report both, labelled, with a sentence on why they differ.

Penetration answers a third question. The double jeopardy framework defines it as the proportion of category buyers who buy the brand within a given period, and reports, from work by researchers associated with the Ehrenberg-Bass Institute, that brands of different sizes differ mainly in penetration. That makes penetration a natural companion to share and a misleading substitute for it, because a brand can be bought by a wide spread of category buyers who each buy little, or by a narrow group who each buy a lot.

MeasureWhat it dividesWhat it answersWhat it leaves out
Share by valueThe business's sales revenue over the market's, on one definition and periodHow much of the money spent in the market the business takesHow many buyers that money came from
Share by volumeThe business's units or purchases over the market'sHow much of what buyers buy comes from the businessWhether the business sells above or below the market's prices
PenetrationThe business's buyers over the category's buyers in a periodHow widely the brand is boughtHow much each buyer buys, so it cannot stand in for a share of sales

Use the same market definition as the sizing work

The market sizing guide writes the market as a definition someone else could apply: drawn around the job buyers want done, so that substitutes count, with a unit, a period and boundaries such as regions, buyer types and price bands. A share estimate borrows that definition rather than writing a fresh one. If the plan works from the serviceable market, the share is a share of that serviceable market and the report says so; a share of the total market is a different figure. The obtainable layer is not a market to divide by. The sizing guide treats it as what the business could realistically win within a stated period, which makes it a target that the current share can be set beside.

Before any arithmetic, write down the boundaries: the products counted, with any substitutes the sizing work included; the geography; the channels, such as direct sales, retail, trade or hospitality; the buyers, such as households or businesses of a stated size; the period; and the unit, with the point in the chain where money is counted when the share is by value. That last item matters more than it looks. A published figure may count what end buyers paid, retailer margin included, while the business's revenue counts what it invoiced. As general practice, convert one onto the basis of the other, or say which way the mismatch pushes the share. Keep the definition with the estimate on the market sizing worksheet, so that next year's refresh starts from the same boundary and a changed definition starts a new series.

From your sales against the market's

The first route divides the business's own sales inside the defined market by a published figure for the whole market. The numerator comes from the sales records for exactly the period, geography, channels and unit the definition names, with anything outside the boundary stripped out.

The denominator is where the work is, and the hub's tiers say what each kind of source brings. Official statistics and regulator publications carry documented methods and no commercial stake in the answer, though they can lag the market and group categories differently from the business. In the UK, the Competition and Markets Authority's market studies and the findings of its investigations can describe a sector it has examined, so check whether the category is one of them. Trade bodies know their sector well and would like it to look healthy, and analyst reports vary in rigour. Put any such figure through a desk research pass before it becomes a denominator: log the source, copy the figure with its definition, unit, geography and date, and record how much weight it can bear.

This route invites a quiet mismatch. The published figure covers a wider product range, extra channels, another region or another year, and the share comes out smaller or larger than it is. Set the source's definition, quoted as the source words it, beside the business's own. Where they differ, either restate the published figure onto the business's definition using a split the source itself publishes, or narrow the business's definition to match and say that you did.

Your buyers against the category's buyers: penetration read beside share

A second question sounds like share and is not: how many of the category's buyers bought from us? The double jeopardy framework calls that penetration and names where it comes from. Panels of consumers, and some retailers, can supply each brand's penetration, the rate at which its buyers purchase (Purchase Frequency) and its portion of category buying, all for one period. Without that data, a business can divide its own buyers in a period, taken from its customer records, by an estimate of the category's buyers from the sizing work or category data, for a rough figure; the framework adds that setting such a figure against rivals calls for judgement and is not a measurement. A brand tracker is a third source: the tracker tutorial samples category buyers rather than the brand's own customers, screened on whether they have bought the category lately or plan to, and, as general practice, a question added on which brands each respondent bought in a stated period gives a survey estimate of penetration among them.

Three rules apply whatever the source. Fix the period and keep it comparable, because a longer window gives more people the chance to buy each brand at least once. Report penetration on its own labelled line beside share. And do not convert it into share, which would need what each buyer spent with the brand and with everyone else; penetration does not hold that, and a conversion built on assumed averages stacks a guess on an estimate.

Rebuilding the market from competitors

The second route counts the market from the sellers' side: list every seller in the defined market, estimate each one's sales in the same unit and period, add the business's own, and divide.

The competitor analysis guide builds the competitive set from what buyers say they weighed, substitutes and doing nothing included, rather than from the companies the business likes to watch. For a share estimate the Competitor Set has to hold every seller inside the boundary, large and small, plus a line for the small sellers nobody can name, carried as a range.

The competitive intelligence guide lists annual reports, filings and investor material among its public sources, with segment performance and customer counts where a company discloses them. The hub's caution applies: a competitor's public material is accurate about what the company is obliged to disclose and promotional about the rest, and a disclosed figure may cover more segments or regions than the definition. The sizing guide adds that a disclosed customer count or segment revenue puts a lower bound on a market estimate. Where nothing is disclosed, the general practice is to use observable signs of scale, such as the number of outlets stocking a brand, combined with an assumption about sales per outlet that goes on the worksheet with a low and a high value.

The guide to expert and trade interviews explains how distributors, consultants and installers can describe the way a market is structured, which tests such assumptions. It also draws the line on competitor information: prices a competitor has published, and anything an ordinary customer could see, are fine to talk about, a competitor's confidential figures are not, and if an expert starts to share them the topic stops and nothing is written down. That line follows the competitive intelligence guide's reading of the CMA, which publishes guidance on the risks that arise when competitors share sensitive information, such as the prices they intend to charge, their margins or their plans, whether face to face or through an intermediary like a consultant or a trade association. A share estimate is built from what is published or observable and needs nothing confidential. Treat this as general direction, not legal advice, and take a method in doubt to legal counsel.

Signals that move with share but are not share

Two measures sit close to market share in marketing reports and are easy to mistake for it.

Share of Search divides searches for the brand by the combined searches for every brand the category holds. The share of search tutorial builds it from a fixed competitor set and wants the business's market share, from sales data, industry sources or estimates, on the same chart as the trend; the estimate this page produces is that input. According to the share of voice guide, work presented through the IPA has made the case that share of search follows market share and can run ahead of it, which the tutorial treats as a published argument about patterns across categories rather than a guarantee for any one brand. It is expressed interest, existing customers looking for the brand included.

Share of Voice measures how much of the category's communication belongs to the brand, whether counted in advertising, coverage or searches. The share of voice guide reads it against share of market, calls the gap between them excess share of voice, and starts its budget method from the current share of market, so a share reported as a range yields a budget as a range. It also cautions that the published association is weaker and noisier where shares are small. The hub calls share of voice a leading signal of movement in market share; a leading signal is still not the share. Keep one competitor set across the estimate and both signals, and read them over time against the share range.

Reconciling the routes and reporting a dated range

With both routes on one definition, read the agreement and the gap, as the sizing guide does for a market size. Agreement between routes that share no assumptions is a reason for confidence. A gap points somewhere: the published figure may be drawn wider than the definition, the rebuilt market may have missed a seller or a channel, or the assumption about sales per outlet may be off. Find the reason before choosing a figure, and where it is a boundary, correct the boundary on both routes rather than splitting the difference. Then run the estimate at the low and high values of the inputs that move it furthest, and report the lines below.

Report lineWhat to writeWhy it is there
DefinitionProducts, geography, channels, buyers, period and unit, in words someone else could applyLets a reader see which market was divided
UnitValue or volume, and for value the point in the chain where money is countedValue and volume shares can differ
RangeLow and high share, with the route behind each endShows the estimate as uncertain as it is
Driving assumptionThe input that moves the share furthest, with its low and high valuesTells the next estimate what to improve
PenetrationOn its own line, with its source and periodKeeps buyers and sales apart
Date and refreshWhen the estimate was made, the period it covers and when it will be redoneStops an old figure passing for a current one

Figures built on few observations, such as a tracker sample or a handful of outlet counts, deserve the widest ranges, and the guide to reading small numbers recommends showing a range with the count behind it instead of a figure quoted alone. Over time, read share against the same period a year earlier on an unchanged definition: a Year-on-Year Comparison keeps Seasonality out of the reading. The guide to comparing periods covers matching like with like and handling breaks; a change to the market definition, or to a source's method, is a break to mark on the chart rather than a movement to explain. And if a board questions the share, remember that a market size sits inside it: the troubleshooting page for a questioned market size rebuilds that layer by layer from its definitions.

A cider maker estimates its share of a regional market (illustrative)

Illustrative example — not a real result

Wuzzelbrin Cider estimates its share of cider sales in its home region

Wuzzelbrin Cider, an invented cider maker, sells canned and bottled cider through shops and its own website in its home region and has never sold to pubs or bars. The board wants a market share figure for its strategy review, and the marketing lead estimates it by value for the last financial year, in two ways.

The first route sets its own sales against the market's. Wuzzelbrin invoiced £1.2 million in the region; at the shelf prices its stockists charge, that is about £1.9 million of retail sales. A trade body's regional report puts cider sales in the region at £84 million, which would make the share about 2.3%.

The second route rebuilds the market from competitors. The marketing lead lists 14 brands sold in the region's shops. One rival's annual report gives its regional retail sales; for the other 12, a count of stockists is multiplied by sales per stockist, set between £9,000 and £13,000 from Wuzzelbrin's own figures and two conversations with regional distributors. The rebuilt market, Wuzzelbrin included, comes to £31 million to £38 million, a share of 5.0% to 6.1%.

The routes differ by more than double. The trade body's definition, read in its own words, includes sales in pubs, bars and restaurants, which Wuzzelbrin does not make, and the same report gives shop and online sales as £36 million. Narrowed to those, the first route gives 5.3%, inside the range of the second.

The brand tracker it already runs among 600 people in the region who bought cider in the past 3 months asks which brands they bought in that period; 9% name Wuzzelbrin, roughly 7% to 11% once the sample is allowed for. The report shows this as penetration among recent cider buyers, on its own line, and does not turn it into a share.

The board paper reports a share of 5% to 6% of shop and online cider sales by value in the region for the year, dated the month it was estimated, and names sales per stockist for rivals as the assumption driving the spread. From the next quarter the team charts its share of search against the same 14 brands each quarter beside the yearly share range, with promotions annotated, and repeats both routes on the same definition a year later.

Common mistakes

  • A share with no unit. Quoting "our share" without saying whether it is by value or by volume.
  • Dividing by someone else's market. A published figure used without checking its products, channels and region against the sizing definition.
  • Mixing points in the chain. Invoiced revenue divided by a market counted at shelf prices.
  • Reporting penetration as share. The proportion of category buyers who bought the brand answers a different question from the proportion of sales.
  • Reporting share of search as market share. It is expressed interest, read beside the estimate.
  • Asking rivals for their figures. Competitively sensitive information is off limits, directly or through anyone in between.
  • A single undated figure. A point estimate hides the driving assumption, and an undated one gets reused.
  • Comparing unlike periods. A quarter against a year, or a peak season against a quiet one, produces movement that belongs to the calendar.

Frequently asked questions

Can we work out our market share from the number of customers we have?

Not directly. Your customers set against all the buyers in the category give penetration, the proportion of category buyers who bought from you in a period, and that figure says nothing about how much each of them spent. Market share divides your sales by the market's sales, in one unit, over one period and on one definition. Customer numbers are still worth having: report penetration on its own line beside the share estimate and read the two together, rather than turning one into the other.

Should market share be measured by value or by volume?

By whichever unit the decision and the sizing work use, stated plainly beside the figure. The two can differ whenever prices differ between sellers, so a premium brand can hold a larger share by value than by volume and a low-priced one the reverse. If both can be estimated, report both with their labels and explain the gap, rather than choosing the one that flatters the business.

How precise does a market share estimate need to be?

Precise enough for the decision it serves, and no more precise than its weaker half, which for a business without category-wide sales data is the market figure. Report a range built from two independent routes, name the assumption that drives the spread, and date it. If both ends of the range lead to the same decision, stop there; if the two ends lead to different decisions, put the next piece of research into that assumption rather than into a longer report.

Terms used on this page

Frameworks

Where this page is used

Sources

  1. Competition and Markets Authority — GOV.UK
  2. Ehrenberg-Bass Institute for Marketing Science — Ehrenberg-Bass Institute
  3. Institute of Practitioners in Advertising — IPA

Related