Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

PR & Earned Media › PR Fundamentals

Correcting a Press Release After It Goes Out

What to do when a press release goes out with a wrong figure, too early or to the wrong people: who to tell, what to send and how to fix the newsroom.
Tutorialintermediate11 min readUpdated

A sent release cannot be recalled

The press release distribution checklist is the gate before a release goes, and it is blunt about what happens if something slips through: once sent, the release can only be put right in public. A release is harder to correct than an email or a web page because of who holds it. Journalists may already be writing from it, on a deadline the organisation does not control. An embargo may still be running. The newsroom page carries the same text at a public address. A distribution service may have passed copies on, and partners may have scheduled posts that quote it. Where a correction is needed, each of those holders needs the open correction, not only the newsroom page.

The general shape of any correction is covered elsewhere. The sent email correction tutorial stops the send, works out what went wrong and who received it, decides whether a correction is needed at all and changes the check afterwards; the report correction tutorial adds the rule that the people who acted on the wrong figure hear first. This tutorial follows the same order but spends its time only on what a release adds: journalists, embargoes, the newsroom and copies held by others.

Its neighbour starts later. The guide to negative or inaccurate coverage deals with a piece that has run already and got facts wrong, and notes that an error in coverage may have begun with something the organisation said. When the organisation's own release is the source, the work starts here, before the error spreads into stories.

Treat the error as a marketing incident: one named lead, such as whoever sent the release, one log of what happened and when, and a line in the error log after the fix is checked.

Before you start

  • The release as sent and the approved version. Compare them, because the difference shows whether the error was in the approved text or crept in afterwards.
  • The send record. Who received the release, when, from which address, through which distribution service, and which posts and pages were scheduled around it.
  • The embargo terms. The time, date and time zone, and which journalists agreed to them.
  • The source behind every figure. The data table, the report or the person quoted, so the right answer can be shown rather than asserted.
  • Who owns data protection. If addresses were exposed or personal data went to the wrong people, they need to hear before anything else is sent.

The steps

  1. Stop further sends, scheduled posts and the newsroom page

    Pause anything that has not gone yet: a second wave to the media list, the public send that follows an embargoed one, a distribution service booking, scheduled social posts, the newsletter item and any partner posts you can reach. If the newsroom page is already live and the error is serious, keep it at its address and put a short line at the top saying the release is being corrected; if it is minor, leave the page up until the corrected version is ready. Keep the faulty version exactly as sent, because the notice will need to say precisely what changed.

  2. Establish what is wrong and whether the embargo still holds

    Write the error in one sentence: which figure, which date, which name, which recipients. If any addresses were exposed or personal data reached the wrong people, tell the data protection owner now, before any notice goes out. Then settle the embargo, because it decides how much time you have. An embargo is an agreement rather than a law, as the media relations and pitching guide puts it, so ask whether it is still being kept. If the release went to journalists who never agreed the terms, assume they may publish. If the organisation published early, through the newsroom page or a scheduled post, tell the briefed journalists at once and agree whether the embargo still stands or lifts for everyone together. If a journalist broke it, the launch PR guide says to treat the story as live: put the newsroom materials up, let the other briefed writers know straight away so none is left behind, and move forward any owned announcements that were waiting for the embargo. Check the boilerplate and the contact details too, since a mistake there repeats in every future release.

  3. List every journalist, distribution service and partner copy

    Take the recipient list from the send itself, not from the media list as it stands now. Add the distribution service, if one was used, and ask it what it can do about copies it has already sent or published; record the answer rather than guessing. List any syndicated copies you can find, and every partner, stockist or agency who received the release to share. Copies given to people outside the team are the hardest to reach, and the asset withdrawal tutorial finds them by writing to each holder with what to remove, what replaces it and a request to confirm. Finally, note which journalists have replied, asked questions or said they are writing.

  4. Decide whether the error needs a correction

    Ask what a journalist or reader would get wrong because of it. A typo outside the quotes, figures and names, or a clumsy sentence, changes nothing a writer would print, so fix the newsroom page quietly and move on. A wrong figure, date, price, name or claim would be printed as fact, so it needs a correction to every recipient. A wrong embargo time needs a notice before the wrong time arrives. A spokesperson who cannot be reached needs a new name on the newsroom page and a note to anyone who asked for an interview. If the correction changes the news itself, such as a launch date slipping or an offer being withdrawn, it has become an announcement of unwelcome news, and the guide to announcing bad news to the press sets the order of telling.

  5. Mark the newsroom page and master copy corrected with a dated note

    Correct the release on the newsroom page at the same address, so links journalists have already copied still work; the newsroom guide asks for a clean, permanent address for every announcement. Add a dated note near the top saying what was wrong and what replaces it, as the guide to updating and correcting content does for an open correction, instead of swapping the text and hoping nobody compares. Correct the master copy in the shared folder, the version in the press kit and anything derived from it, so the old wording cannot be reused. If the release is withdrawn altogether, keep the page with a note saying so and why.

  6. Write the correction notice

    Keep it short and put the correction first, as the inverted pyramid puts the conclusion first: the subject line says it is a correction to a named release, and the opening sentence gives the right figure or date beside the wrong one. Then say whether the embargo is unchanged, link the corrected newsroom page and name a contact who will answer. One sentence of apology is enough; a long explanation draws more attention to the slip than to the fix. Attach the corrected release in the same structure as the press release template, with the release line marked as corrected, so a writer can work from one document.

  7. Phone anyone already writing, then send the notice to every recipient

    Writers who said they were working on the story, or who asked a question, could print the wrong figure before they read an email. Ring them first, give them the correct fact and the evidence, and follow up in writing. The report correction tutorial applies the same order to anyone who acted on a wrong number: they hear directly before the general note goes out. Then send the notice once to everyone on the list from the third step, including the distribution service, and to nobody else; anyone who should never have had the release hears nothing more unless the data protection owner advises otherwise. Writers who never had the wrong version gain nothing from hearing about it.

  8. Ask writers who have published to update their piece

    Find any coverage that has already used the wrong fact. Ask each writer politely, in writing, to update the piece: name the statement, give the correct fact and supply the evidence, as the negative coverage guide sets out for a correction request. Say plainly that the error was the organisation's, because it was; a writer who copied an official release accurately has done nothing wrong. Ask only for what fits the error, and accept that each publication handles changes in its own way. Record each request and its outcome.

  9. Brief spokespeople and whoever answers enquiries

    Give the spokesperson, the press contact and any customer-facing team the corrected facts and a short line on what went wrong, so nobody repeats the old figure on the phone. Route questions about the correction through the media enquiries routine, with one route in and every call logged, and treat a question about the mistake as an ordinary enquiry rather than a crisis unless the crisis plan's triggers are met. If addresses were visible to every recipient, or the release carried personal data to people who should not have it, the data protection owner decides what follows. The GDPR summary on this site lists the regulation's breach duties: assess the breach, report it to the supervisory authority unless it is unlikely to put people at risk, tell the people affected where their risk is high, and keep a record. A public release that merely reached the wrong journalists is not described as a breach.

  10. Log it in the coverage log and change the pre-send check

    Record the error, the correction and each piece that carried the wrong fact in the coverage log, using the notes field the monitoring and reporting guide sets aside for errors to correct. Then find out why the check missed it, starting the five whys from why the wrong figure reached the release. The error review tutorial runs that review without blame and records the result in a single error log shared across channels. Then add a line to the distribution checklist the team uses, such as checking every figure against its source table or sending embargoed releases with addresses hidden.

Release errors and what each needs

The table covers the errors that only a release produces. Mistakes in the wording of an email, in a report or on a web page have their own tutorials.

ErrorWhat to do firstWhat to sendWho decides
A wrong figure or factPause further sends; confirm the right figure against its sourceCorrected release and notice to every recipient; calls to writers already at workThe release's approver
A wrong date or embargo timeWork out which time journalists will act onA notice with the correct time before the wrong one arrivesThe press owner
The organisation publishes before the embargo liftsTake down what can be taken down; tell briefed journalists at onceA note agreeing whether the embargo stands or lifts for everyoneThe press owner, with the approver
A named spokesperson who cannot be reachedFind a briefed alternativeA new name on the newsroom page; a note to anyone who asked for interviewsThe press owner
Wrong recipients or visible addressesStop further sends; check what was attached and who could see whomNothing more to the wrong recipients unless data protection advice says otherwiseThe data protection owner, where personal data is involved

A toy maker corrects a survey figure (illustrative)

Illustrative example — not a real result

Pockatrel Toys corrects an embargoed release

Pockatrel Toys, an invented maker of wooden toys, surveys 1,200 parents and sends an embargoed release at 10:00 on a Tuesday to 34 writers and one distribution service, under an embargo of 00:01 on Thursday. The headline figure, 72% of parents buying fewer plastic toys than they did 3 years ago, has been copied from the wrong column of the data table. The correct figure is 58%.

At 15:40 a buyer at one of its stockists, sent the release as a courtesy, asks why the number is so much higher than last year's. The PR lead checks the table, pauses the scheduled posts and the newsroom page, and confirms the embargo still holds. The send record lists the 34 writers, the distribution service and the stockists who were sent it as a courtesy; 2 writers have replied to say they are working on the story.

The PR lead phones both writers before 17:00, gives them the right figure and emails the data table. At 17:30 a release marked as corrected goes to all 34 writers, the distribution service and those stockists, with a first line saying that the headline figure is 58%, not 72%, and that the embargo is unchanged. The newsroom page is corrected and carries a dated note.

On Thursday morning 6 pieces appear. Five use 58%. One regional news site has written from the release it received through the distribution service on Tuesday and prints 72%. The PR lead emails its writer with the data table and an apology for the error, and the article is updated that afternoon. The coverage log records 6 pieces, 1 corrected.

The review finds that figures were copied by hand from the table into the draft. Pockatrel adds a line to its distribution checklist: every figure in a release is checked against the source table by someone who did not write it.

Common mistakes

  • Sending a second release without saying what changed. Put the correction in the first line.
  • Correcting a wrong fact silently. Keep the address, correct the text and add a dated note.
  • Emailing writers who are already writing. Phone them first; an email can arrive after they file.
  • Assuming the embargo still holds. Check who agreed it and whether anything was published early.
  • Forgetting copies held by others. The distribution service, partners and scheduled posts all carry the release.
  • Blaming the journalist. If the error came from the release, say so when asking for an update.
  • Telling people who never had the wrong version. The notice goes to the original recipients only.
  • Treating visible addresses as a PR problem. Exposed addresses and personal data are for the data protection owner first.
  • Fixing the release but not the check. Change the step that let the error through.

The PR fundamentals hub sets this tutorial alongside the guides to writing releases, answering enquiries and coverage that goes wrong.

Frequently asked questions

Can a press release be withdrawn after it has been sent?

Not from the inboxes it has reached. What can be done is to stop any further sends, mark the newsroom page as corrected or withdrawn with a dated note, tell every recipient plainly what has changed and why, and ask any distribution service what it can do about the copies it has already sent. If the news itself has been called off, say so in the notice rather than letting the original release stand unexplained.

Should the corrected release go to the whole media list?

Send the correction notice to everyone who received the original release, including the distribution service, and to nobody who did not. Writers who never had the wrong version gain nothing from hearing about the mistake, and they can still find the corrected release on the newsroom page if they come to the story later.

Is sending a release to the wrong journalists a data breach?

A public release that simply reached journalists it was not meant for is not, on its own, described as one. It can become a data protection matter if every recipient's email address was visible to all the others, or if the release or an attachment carried personal data to people who should not have it. In those cases tell whoever owns data protection at once and let them decide what the law requires; nothing here is legal advice.

Terms used on this page

Frameworks

Where this page is used

Sources

  1. Regulation (EU) 2016/679 (GDPR) — EUR-Lex

Related