Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

PR & Earned Media › PR Fundamentals

Preparing a Spokesperson for a Media Interview

How to prepare a spokesperson for an interview: the briefing note, key messages with proof, likely and difficult questions, rehearsal, ground rules, debrief.
Tutorialintermediate12 min readUpdated

What preparation changes

The press releases and online newsroom guide asks every organisation to name its spokespeople, brief them on the likely questions and agree what they can and cannot say. That is the standing arrangement. An interview is the moment it is tested: one journalist, one story, one format, and a person answering in their own words, sometimes live, often with follow-up questions nobody planned for.

Preparation changes three things. It changes relevance, because a spokesperson who knows what the journalist is writing and who reads or listens to the outlet can answer the question actually asked rather than the one they hoped for. It changes accuracy, because facts are checked before the interview rather than recalled during it. And it changes composure, because the awkward question has been heard and answered aloud before, so it arrives as something familiar. None of this is about avoiding questions or performing. Journalists can tell when they are being handled, and audiences can too. The aim is a spokesperson who is useful to the journalist and honest with the audience, which is the same quality search engines and readers associate with E-E-A-T: real expertise from a named person, accountable for what they say.

This tutorial assumes the interview has already been agreed, either because a pitch succeeded, as the media relations and pitching guide describes, or because a journalist asked, which the tutorial on handling media enquiries routes. It covers one interview at a time; a standing spokesperson programme for awareness, with a named expert and a set of topics, is described on the awareness through PR page, and launch-day interviews sit inside the plan on the launch PR page.

Before you start

  • Have the organisation's messages written down. The messaging hierarchy and proof points guide sets out how messages and their proof fit together, and the messaging house template holds them on one page. The interview draws from these; it does not invent new ones.
  • Know where checked facts live. Figures, product claims and dates the spokesperson may use should come from the claims library or from the person who owns the fact.
  • Confirm who approves. Know who signs off the briefing note and who must be told if the interview strays onto a sensitive subject.
  • Check the staff rule. The staff social media policy should already say that journalists go through the press contact; the spokesperson should know it too, so a follow-up call after the interview comes back through the same route.
  • Know what is out of bounds. Matters in litigation, regulatory investigations and other legal questions go to the organisation's legal adviser. They are not answered from a briefing note, and the spokesperson should know in advance how to say so.

The steps

  1. Confirm the request and the format

    Before anything else, pin down what has been agreed. Record the journalist's name, the outlet, the subject and the angle as the journalist described it, the format (print, online, radio, television, podcast or video), whether it is live or recorded, in person, by phone or on a video call, who else is taking part, and the date, time and place. Ask whether there will be a phone-in, a studio guest from another side, or photographs. If any of this is unclear, ask the journalist or producer now; it is routine for them and shapes every later step. Write the answers at the top of the briefing note so the spokesperson never has to ask on the day.

  2. Research the journalist and the outlet

    Read or listen to the journalist's recent work on the subject and to the outlet's usual treatment of stories like this one. Note the angle they tend to take, the kind of questions they ask, whether they challenge guests, and who the audience is: who reads the section or listens to the programme, and what they already know. The media list fields in the media relations guide, such as beat, audience and recent stories, are a ready-made frame for this. Check whether the outlet has covered the organisation or its competitors before, and how. The point is not to second-guess the journalist but to prepare answers that make sense to their audience, which is where the interview's Reach actually lands.

  3. Write the briefing note

    Put everything the spokesperson needs on a short note they can read in one sitting. It holds the details from the first step, a paragraph on the journalist and the audience, the likely angle, the messages and their proof, the likely and difficult questions with suggested answers, the ground rules, and any subjects to avoid with the reason and the words to use. Add the key facts and figures in one place, each with its source, and the name and number of the PR lead for the day. Keep it plain; a briefing note that needs its own briefing will not be read. Have it approved by whoever owns the subject before the rehearsal.

  4. Choose the messages and the proof behind each

    From the messaging house, choose the few points that fit this story and this audience, rather than the full hierarchy. Rewrite each one as the spokesperson would say it aloud, in the organisation's brand voice but in spoken, everyday words. Attach to each message a piece of proof the audience can picture: a fact from the claims library, a customer example the customer has agreed to, or something the spokesperson has seen first hand. A message without proof sounds like an advertisement; proof without a message sounds like a list. If the interview is an expert comment rather than a story about the organisation, the message may simply be a clear view on the subject, with the reasoning behind it.

  5. List likely and difficult questions

    Write down the questions the journalist is likely to ask, starting with the obvious ones: what is happening, why, who it affects, what it costs. Then write the difficult ones: the criticism a competitor or a customer would make, the question about price, safety, staff or the environment, the question the organisation would rather not be asked. For each, draft a short, honest answer. Where the true answer is that the organisation does not know yet, or cannot say, write that answer and the reason. For longer answers, the What, So What, Now What structure is a useful shape: what the fact is, why it matters to the listener, and what happens next. Never prepare an answer that is not true, and never prepare a figure that has not been checked.

  6. Rehearse aloud in the interview's format

    Reading a briefing note is not rehearsal. Have the PR lead, a colleague or a trainer play the journalist and run the interview in its real format: on the phone for a phone interview, standing and timed for a short broadcast slot, on camera for video, with interruptions if the programme interrupts. Ask the likely questions first, then the difficult ones, then a question that is not on the list at all. Afterwards, go through what worked: which answers were clear, where the spokesperson drifted into jargon, where a fact was missing, where an answer sounded evasive. Run the hard parts again. Rehearsal is where messages stop sounding like a document and start sounding like the person.

  7. Agree the ground rules

    Treat everything as on the record, before, during and after the formal interview, including small talk and the walk to the studio door. Off-the-record or background terms vary between journalists and, as the media relations guide says, must be agreed explicitly before anything is said; most spokespeople should not use them at all. Agree with the spokesperson which subjects they will not discuss and the plain words for saying so. Confirm practical points with the journalist as well: whether a recording or photographs are expected, how the spokesperson will be named and titled, and whether written facts will follow. If a fact check is offered, take it; asking to approve copy is a different request that many journalists will decline.

  8. Prepare for the day itself

    Settle the practical details that unsettle people. Confirm the time and place, how to get there or the dial-in or video link, who will meet the spokesperson and who to call if something changes. For video, check the background, the light and the sound; for radio by phone, a quiet room and a landline or a reliable connection. Keep the briefing note's key facts within reach but do not script answers word for word, because read-out answers sound read out. Make sure the PR lead is reachable throughout, and that the spokesperson knows that if they get a fact wrong, they can correct it in the interview itself.

  9. Debrief and correct afterwards

    As soon as the interview ends, the PR lead and the spokesperson note what was asked, what was said and anything promised, such as a figure to send or an image to supply, and send those promptly in writing. Check every figure the spokesperson gave against its source. If one was wrong, contact the journalist or producer straight away with the correct fact; a correction offered before publication or broadcast is the easiest kind to make. When the piece appears, log it as the media monitoring and coverage reporting guide describes, including which messages appeared and how the spokesperson was quoted. Finally, update the briefing note template and the question list with anything the interview taught you.

Preparing for each interview format

Most of the preparation is the same whatever the format; what changes is how answers are shaped and rehearsed. The table is a starting point, not a rule set.

FormatWhat changesRehearse forWatch out for
Print or online, by phone or in personLonger conversation, quoted selectivelyClear sentences that stand alone as quotesA throwaway remark becoming the headline
Live radioNo edit, short answers, sometimes a phone-inShort spoken answers and an unexpected caller questionJargon and figures the listener cannot picture
Recorded radio or podcastEditing possible, often a longer conversationTelling a short example from start to finishRambling, because the format feels relaxed
Television or videoPicture as well as words, short clipsAnswers that make sense if cut to a single sentenceBackground, clothing or notes that distract
Panel or debateAnother guest may disagreeAnswering the critic calmly with a factArguing with the other guest instead of informing the audience
Expert comment for a news storyA short quote among other voicesOne clear view with a reasonCommenting outside the spokesperson's subject

Podcast guest appearances, which are often longer and more conversational than news interviews, are covered from the marketing side in the guide to podcasts and audio. Reactive comment on breaking news needs a list of briefed spokespeople ready in advance, as the campaign ideas and data stories guide explains; this routine is what briefing each of them looks like when a request comes in.

A water filter maker's first radio interview (illustrative)

Illustrative example — not a real result

Ixmordel Filters prepares its head of product for live radio

Ixmordel Filters, an invented maker of under-sink water filters, is invited to appear on a regional radio station's mid-morning programme about hard water, with 10 minutes on air including a listener phone-in. The PR manager confirms the slot with the producer: live, by phone from the office, with the presenter and possibly 2 or 3 callers.

She listens to 3 recent episodes and notes that the presenter is friendly but asks about cost, and that callers often raise their own complaints. The one-page briefing note sets out the slot, the presenter, the audience of mostly older home owners, and 3 messages: hard water shortens the life of kettles and boilers; a filter can reduce limescale where the water enters the kitchen tap; and cartridges can be returned for recycling. Each message has a fact from the claims library, with its source.

The difficult questions list includes "Isn't bottled water cheaper?", "What happens to the used cartridges?" and "Why should I believe a company that sells filters?". In a 30-minute rehearsal by phone, the PR manager plays the presenter and then an angry caller. The head of product's first answer on price runs to a minute and a half, so they cut it to 3 sentences and rehearse it twice more.

The interview goes well, but in the debrief the head of product realises he said cartridges last "about a year", while the claims library says 6 months at average use. The PR manager emails the producer within the hour with the correct figure; the station adds it to the programme's web page, and the claims library entry gains a note to quote the figure with its condition.

Verify it worked

  • Open the briefing note. It should hold the confirmed details, the audience, the messages with proof, the questions, the ground rules and the PR lead's number.
  • Check each message in the note. Each should have proof beside it, and each figure should name its source.
  • Run the rehearsal in the interview's format. The spokesperson should answer the likely and difficult questions aloud in plain words, without reading.
  • Ask which subjects are out of bounds. The spokesperson should name them and give the plain words for declining, without looking at the note.
  • Compare what was said with the sources after the interview. Every figure should match, and every promise, such as a figure or an image, should be on a list to send in writing.

If it goes wrong

  • The spokesperson reads answers out. The likely cause is a script written word for word. Cut the note back to key facts and rehearse again, aloud and in the format.
  • Answers drift into jargon or run long. The likely cause is messages that were never rewritten in spoken, everyday words. Rewrite them as the spokesperson would say them, then run the hard parts again.
  • A message sounds like an advertisement. The likely cause is missing proof. Attach a fact from the claims library, a customer example the customer agreed to, or something seen first hand.
  • A question arrives that nobody prepared for. The likely cause is thin research on the journalist, or no unlisted question in rehearsal. Say the figure is not to hand, then send the checked fact in writing afterwards.
  • A figure turns out to be wrong. The likely cause is recall instead of a checked source. Contact the journalist or producer straight away with the correct fact, and add a note to the claims library entry.

Next steps

Common mistakes

  • Briefing from the press release alone. The release is what the organisation wants to say; the briefing note is about what this journalist will ask and this audience needs.
  • Too many messages. A spokesperson trying to fit in everything says nothing memorable. Choose a few for this story.
  • Messages without proof. Each point needs a fact, an example or first-hand experience behind it.
  • Reading instead of rehearsing. Answers have to be said aloud, in the format, with the hard questions asked.
  • Preparing evasive answers. If the honest answer is "we don't know yet", prepare that answer and the reason.
  • Assuming anything is off the record. Treat every word as on the record unless other terms were agreed first.
  • Guessing at figures. Give only checked facts and send anything else in writing afterwards.
  • Skipping the debrief. Promises go unkept and errors go uncorrected unless someone checks straight away.

The PR fundamentals hub sets spokesperson preparation beside the rest of media relations and press materials.

Frequently asked questions

Do we need formal media training before anyone gives an interview?

Not necessarily. Media training is, at heart, rehearsal: someone plays the journalist, asks the likely and the awkward questions in the interview's format, and the spokesperson practises answering in plain words with facts they can stand behind. A PR lead can run that for a single interview using this routine. Outside trainers can add realism and candid feedback, especially before broadcast or a high-stakes story, but the preparation steps are the same either way.

What should a spokesperson do when they do not know the answer?

Say so, and offer to find out. 'I don't have that figure to hand; I'll get it to you after we finish' is a complete, credible answer, and the PR lead then sends the checked fact in writing. Guessing at a number or speculating about a cause is how most interview errors happen, and a wrong figure in print is harder to fix than a short delay.

Can we ask the journalist for the questions in advance?

You can ask what the interview will cover, and most journalists will describe the subject and the angle, which is all the briefing note needs. Asking for an exact list of questions, or for questions to be agreed or excluded, is a different request that many journalists will decline. Prepare for the subject and the likely angles rather than a script, and treat anything the journalist shares as a guide, not a guarantee.

Terms used on this page

Frameworks

Where this page is used

Related