Skip to content
Faisal Mahmud TusherDigital marketing, SEO & analytics
with Faisal Tusher

Interactive Tools › Campaign Break-even Calculator

Break-even Calculator for Stock Clearance

Using the break-even calculator to clear surplus stock: clearance price as order value, recovery value plus fulfilment as cost, then the lower break-even.
Tutorialintermediate7 min readUpdated

Why a clearance changes the calculator's inputs

The default page is built around a product the business will keep selling, bought at a known cost and sold at a margin that holds from one month to the next. A clearance breaks that assumption at the moment the decision is taken. Once a line is ending, a season has passed or returned items cannot go back on the shelf, the money spent buying the stock is gone whatever happens next. What the business can still influence is how much cash it gets back, and the realistic alternative to selling it to customers is a liquidator, a charitable donation or writing the stock off.

The product lifecycle guide sets out the choice in its clearance section. On the original cost, the margin at a clearance price is thin or below zero and the Break-even ROAS is very high or unreachable. When the honest alternative is a liquidator or a write-off, many businesses cost the stock at what the liquidator would pay plus the cost of sending it, a basis that lifts the clearance margin and brings the break-even down. The same guide asks for the chosen basis to be written beside the target.

This is different from a promotion on a range that will be restocked. There the business will buy the product again at the usual cost, so the ROAS page for discount promotions keeps that cost and lets the discount shrink the margin. Clearance moves the cost basis itself, which is why its break-even falls rather than rises.

The inputs for a stock clearance

Calculator inputOn the default pageFor stock clearanceWhere to find it
Average order valueAverage order value of the campaign's salesThe clearance price per order customers actually payThe clearance price list and orders from the outlet or clearance section
Gross marginEveryday gross marginClearance margin: (clearance price − recovery value − fulfilment) ÷ clearance price, on the cost basis agreed with financeThe liquidator's offer and the fulfilment cost per order
Campaign spendMedia spend for the campaignPaid support for the clearance lines only, over the clearance windowSpend on the clearance group or campaign kept apart from the core range

The margin row carries the decision. Take the clearance price, subtract what the liquidator has offered per unit and what it costs to pick, pack and send one order, then divide by the clearance price. The difference from an everyday Gross Margin is the cost term: the purchase price disappears and the recovery value takes its place. A written offer from a liquidator or trade buyer is the firmest figure to use; where no offer exists, finance decides what the stock would fetch, and the figure is agreed before anyone sees results.

Order value is the price customers actually pay in the clearance, not the full price the line used to carry or a "was" price shown beside it. Spend covers only the advertising bought for the clearance lines over the window, which is easy to read only when those lines sit in a group of their own, as the guide on picking which products to promote asks.

Entering the clearance inputs step by step

  1. Decide that the line is clearance and agree the basis

    Confirm with buying that the line will not be restocked, and with finance that recovery value plus fulfilment is the cost basis. Write the basis and the date it was agreed next to the target.

  2. Get the recovery value in writing

    Ask a liquidator or trade buyer for an offer per unit on the actual stock, by line where the lines differ, and note how long the offer stands.

  3. Work out the clearance margin

    Subtract the offer and the fulfilment cost per order from the clearance price and divide by the clearance price. If the result is negative, the clearance price is below what the liquidator would pay plus sending costs, and selling to the liquidator returns more.

  4. Enter the price, margin and paid support

    Type the three figures into the calculator, set the clearance group's target from the break-even ROAS it returns, and write the sales needed beside the number of units left in the lines being advertised.

A worked clearance with illustrative inputs

Illustrative example — not a real result

Quirvend Footwear clears last winter's boots

Quirvend Footwear, an invented online shoe shop, has 400 pairs of last winter's boots that it will not reorder. They cost £48 a pair. A liquidator offers £22 a pair, and picking, packing and sending an order costs £8.25. At a clearance price of £55, the clearance margin is (£55 − £22 − £8.25) ÷ £55 = 45%. On the original cost it would be £55 − £48 − £8.25 = −£1.25 a pair, a negative margin that no return on advertising could cover. Finance agrees the recovery-value basis before the clearance opens, and Quirvend sets aside £2,400 of paid support for a separate clearance group over six weeks.

The calculator returns a break-even CPA of about £25 (£24.75 before rounding), a break-even ROAS of 2.22 and 97 sales needed, about a quarter of the 400 pairs. Each pair sold to a customer returns £55 − £8.25 = £46.75 in cash against the liquidator's £22, a difference of £24.75, which is why that is the most an advertised order may cost.

Quirvend emails past boot buyers first and sells 120 pairs with no advertising cost. The clearance group then brings 150 orders on the £2,400, about £16 an order, and the cash left after advertising is £4,612.50, or £30.75 a pair. The last 130 pairs go to the liquidator for £2,860. Across the three routes the boots recover £13,082.50, against £8,800 had all 400 pairs gone to the liquidator.

Campaign Break-even Calculator

Open the Campaign Break-even Calculator →

Prefilled with the example's inputs: Average order value $55 · Gross margin 45% · Campaign spend $2,400 → Break-even CPA $25 · Break-even ROAS 2.22× · Sales needed to break even 97.

All figures belong to the invented shop. Replace the margin in the embedded calculator with one built on the original purchase cost to see how far the break-even moves, and why the basis has to be settled first.

Interpreting break-even ROAS on the recovery-value basis

Start with break-even ROAS, because it is the figure that has moved. On the recovery-value basis it falls, and the clearance group's target is set from it. Compare it with the return the same products needed at full price, and with the return they would need on the original cost: where that last figure is unreachable, the basis is the decision. The product lifecycle guide puts clearance lines in a listing group or campaign of their own for exactly this reason, so the looser target cannot leak into the core range or be tightened by it.

Read break-even CPA next, as the line beyond which the liquidator wins. Below it, every advertised order returns more cash than the same unit sold to the liquidator; above it, the advertising has turned a better route into a worse one. The guide to clearing excess stock treats recovery value as the floor every route has to beat, and the calculator puts that floor in the currency of cost per order.

Then set sales needed against the units left. If the units left are several times the sales needed, the line is deep enough to advertise; if the units left are close to or below the figure, paid support can never repay itself, and the clearing guide's advice applies: thin stock suits past buyers and the outlet section better than a fresh push. Stock depth also changes during the window, so recheck the comparison as lines sell through, and drop a line from the group when it no longer has the depth.

Finally, read the result as cash recovered by route against recovery value, not as revenue or ROAS alone. The product-choice guide measures clearance lines this way, keeping them in a group and target of their own. Count that cash as Contribution Margin net of fulfilment and returns, route by route, because email to past buyers, the outlet section, paid support and the liquidator each recover different amounts. The calculator cannot see the cost the clearing guide warns about most: customers who learn to wait for reductions. Where past buyers are reached by post rather than email, the break-even page for direct mail shows how to read that route against a held-back group.

Pitfalls when clearance numbers go into the calculator

  • Entering the original purchase cost after deciding to clear. The break-even it produces belongs to a product the business no longer stocks, and lines that would recover more cash than the liquidator get no support.
  • Letting the clearance target spill into full-price lines. A looser target shared with the core range lets the bidding chase returns that full-price products cannot afford.
  • Clearing on the same dates every year. A predictable clearance teaches customers to wait and lowers Sell-Through Rate at full price; leftovers caused by Seasonality are a buying lesson, not a calendar slot.
  • Advertising lines with too few units left. When the units left are fewer than the sales needed, no performance from the campaign can make the support pay.
  • Changing the cost basis after the results are in. A basis chosen afterwards is the one that flatters the result; agree it with finance before the clearance opens and keep it.

Frequently asked questions

Why does clearance stock get a lower break-even ROAS?

Once a line will not be restocked and the honest alternative is a liquidator or a write-off, the cost that matters is what the stock would fetch through that route plus the cost of sending it, not what it was bought for. The margin measured on that basis is wider, so the return the advertising has to reach falls. Agree the basis with finance and write it beside the target before the clearance starts.

Should clearance lines share a campaign with the full-price range?

No. A clearance target is looser because its cost basis is different, and inside a shared campaign it pulls the bidding on full-price products towards a return they cannot afford. Keep the clearance lines in their own group or campaign with their own target, and remove each line from it as soon as it sells out or leaves for another route.

When is a liquidator a better route than advertising the stock?

When the advertising would cost more per order than a customer sale adds over the liquidator's price, or when too few units are left to justify building and watching a campaign. Lines that thin can still go to past buyers and an outlet section without paid support, and whatever remains at the end of the clearance window goes to the liquidator as planned.

Terms used on this page

Tools to try

Related